Sharing Information | Sharing Knowledges, New Information, Blogging, Tips and Tricks and Others...

Car Insurance in California

hasan — Sat, 27 Feb 2010 16:20:40 +0000

Most drivers in California know that car insurance is very expensive. Looking for car insurance in California is easy. You know that most people in California use car as their transportation, they have a long distance from their house to the workplace. Therefore it will be clear, that if you drive for a long time you will have a high risk, the risk of accident, so for you it will better to use car insurance for your car.

You know that one of the reason why car insurance in California is very expensive is that there are so many requirement. Minimum liability insurance in California is about $15.000 for injury or death for one person, and $30.000 for injury or death if more than one person, $5.000 if the car was damage. Trailer and off-highway vehicles are not necessary to have insurance.

There are many options out there for car insurance in California in low cost. Online shopping is one of the best way to find out big transactions in California car insurance. When you compare car insurance cost, please make sure that you are comparing for the same amount of insurance. To get cheap insurance you can also have higher deductible. Please don’t forget, if something happened with your car you will need to come up with the amount your deductible in cash to get your car fixed, so that you don’t wanna make it higher then you can afford.

GEICO is one of the famous car insurance company in California. You will remember them by the cute gecko commercials. GEICO offers you in high price in California car insurance. You can get easily about their offering by visiting their website or just by phone.

Esurance is another place to buy car insurance in lower cost in California. Esurance allows you to finish every steps of your car insurance via internet. You can get their offering, buy insurance, and also print out your insurance card just in an hour. Buying car insurance process from Esurance is very easy and simple.

If you are a member of AAA (Automobile Association of America), you can also buy your car insurance from them easily. AAA sometimes have low cost car insurance in California. AAA also offers members other benefits including being able to go to them to do DMV services such as registering your car.

car insurance in California become so important, If you have any questions about you can call your car insurance company, they will help you to solve your problem soon.

Automobile Insurance Resources – Where to Call When You Need Assistance:

California Low Cost Automobile Insurance Program
For more information about this state-sponsored plan for low-income drivers, call (800) 622-0954

California Automobile Assigned Risk Plan (CAARP)
For more information about the State’s insurance plan for high-risk drivers, call (800) 622-0954
California Department of Insurance
300 South Spring Street, South Tower
Los Angeles, CA 90013
800-927- HELP (4357)

California Department of Motor Vehicles
2415 1st Avenue Mail Station F101
Sacramento, CA 95818
800-777-0133

California Automobile Assigned Risk Plan
595 Market St., #1250
San Francisco, CA 94105
(800) 622-0954 Toll-free within California only.

Dos Command List, Global Economic Crisis

Related posts brought to you by Yet Another Related Posts Plugin.

Apolo Ohno Disqualified, Short-track Race

hasan — Sat, 27 Feb 2010 08:50:46 +0000

Americans loves the short tracking skating and Apolo Ohno is the one of the favorite short – track skate champion. He was taking part in the current Olympics happening in Canada now days. He has won many medals in the five hundred relay races. He has performed and danced in the Olympics in Canada so well that very one was surprised. He danced very gracefully and he took so amazing turns that the spectators could not believe their eyes.

Apolo Ohno Disqualified, Apolo Anton Ohno, one of American short-track speed skating favorite, had to face disqualification sanction after he pushed a skater to fight for silver medal in the Olympic 500 meter short track speeding race event

Apolo Anton Ohno was disqualified for pushing a skater after appearing to win the silver medal in the Olympic 500 meter short track speedskating race. Ohno appeared to push Francois-Louis Tremblay of Canada on the final turn, causing Tremblay and South Korean skater Sung Si-Bak to fall. Ohno crossed the finish line second behind Canada’s Charles Hamelin, whose momentum spun him into the middle of the ice as the race ended.

In classic fashion, his final individual race was tinged with controversy. In a postrace interview on NBC, Ohno indicated that a Canadian judge had ruled in favor of Canadian skaters (besides Tremblay, Charles Hamelin, who was not involved in the crash, won gold). In later interviews, Ohno said he had been searching for room inside and found none.

Ohno was disappointed at the unfortunate incident but was hopeful for the last chance at 5000 meter relay and he availed the last chance to earn a bronze medal. Although he was not able to earn a gold medal at Vancouver he thinks he is blessed. Ohno is 27 and this might be his last appearance on winter Olympics.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Wireless USB Adapter Not Recognized

hasan — Wed, 24 Feb 2010 07:49:57 +0000

Hello guys, Now I want to share a little bit about my experience of installing wireless USB adapter, I hope it is useful for you.

The story began when I my old computer had a problem with its motherboard, you know, its capacitors was leakage, so that my computer could not boot normally. I have tried to replace them with the same type, but nothing changed. So finally I decided to buy a new computer.

A new computer had higher spesification than before one, Although this computer was far from satisfaction. I did not have more budget for it. Here are the spesifications:

Processor: Intel Pentium D 940 @ 3200 MHz
Physical Memory: 2048 MB
Mainboard : Gigabyte 8I945GMF
Video Card : NVIDIA GeForce 6600
Physical Memory: 2048 MB
Hard Disk : ST3160023AS (160 GB)
DVD-Rom Drive : BENQ DVD DD DW1625
Chipset : Intel i945G/GZ

I installed Windows XP with service Pack 3. After installing Win XP and Installing all driver for motherboard I tried to connect my wireless USB adapter. I used usb adapter everytime I connected to internet, but now my USB adapter was not being recognized by system. Why did wireless USB adapter not recognized by system?, I used usb cable extension about 5 metre, but my friend also used usb cable extension about 12 metre, but their system could detect usb adapter.

To solve this problem I tried to cut usb cable (utp cable) by 1 metre, but my usb adapter still could not be detected, I tried to cut again by 1 metre for the 2nd time, also still got the same result.

I just had 3 metre USB cable now, but I needed to have at least 5 metre to get good signal from acces point (I placed USB adapter on the roof of my house).

I did not know why this happened? Then I asked my friend about this problem, and he told me how to solve this problem. I found that nothing is wrong with both usb adapter and cable, something is wrong with BIOS setting.

In the picture above we can see there are USB 2.0 controller option under Integrated Periperal. You can set Enabled or Disabled. When I faced this problem (wireless USB adapter not recognized) the option was set to Enabled. So I changed the option to Disabled then tried to reconnect the device, Yes my system could detect my wireless USB adapter now with 5 metre extension cable even when I changed to 12 metre.

You know that when we set option of USB 2.0 controller to Enabled, transfer data via USB port become faster than we set option to Disabled. When the option set to Disabled, USB ports have max power for device, so power lost by extension cable can be minimized.

USB to PS/2 Mouse Connector Wiring, Latest Tech, Gateway One GZ7220, Dos Command List

Related posts brought to you by Yet Another Related Posts Plugin.

The SEO Tips for Starting New Blog

hasan — Mon, 22 Feb 2010 06:55:32 +0000

Good morning all, I hope your feeling good and always keep blogging. It was a long time for me not update my post. Now I just want to share a little bit tips for newbie about SEO, So for you that have Master Degree about blogging you can leave this page now .

Dear my visitors, maybe one of you still confuse about how to optimize new blog (starting new blog). When we think about SEO or Search Engine Optimization of blog, there are many things that we must do, I will try to explain a simple tips for you.

How to optimize our blog? These are the simple steps:

Define your keyword or niche about your blog. This means that what is your blog talking about?
Buy new domain name, It is very important that your domain name should contain your keyword. If your blog talks about music you can buy new domain like funmusic.com maybe.
Define your title of your blog, this must also include your keyword, example: Funmusic.com – Free music download for you.
Optimize the usage of description meta tag. Place your keyword in this tag, example: This blog contains recent music that you can download freely. I suggest that you write your description not over than 160 chars
Optimize your keyword meta tag. Don’t forget to include your keywords

We have just finished optimizing the general things, and now let’s optimize design and content:

Use the heading tag (H1, H2) for your title tag, most search engine likes this.
Write your content related to your keyword or niche.
Don’t forget to place alt tag with your keyword everytime you insert an image to your blog.
Write down the post or article by yourself, not just being copycat.
Minimize Menu link with image, it would better for you to use anchor text instead of image. Place your keyword in anchor text.
Use static page of your URL post or article for better result in SERPs. You can setup the URL in permalink setting if you use wordpress.
The last one, You must design your blog attractively, eye catching, easy for navigation and fast loading.
Submit your blog to search engine or do link exchange with another blog.

That’s all my simple tips for you…, if you have any tips share with us in my comment below, thanks.

Simple tips to boost your site ranking, Using SEO Friendly URLs For Better Search Results, Tips Before Applying Google Adsense Program

Related posts brought to you by Yet Another Related Posts Plugin.

How to Fix Shoutmix Error During Blogwalking

hasan — Fri, 22 Jan 2010 08:04:55 +0000

Everyone already know that something was happened in shoutmix, yes you are right, shoutmix is seemed in error now. Three days ago, January 20th, shoutmix went just fine, nothing wrong, but in January 21st something happened, our link was not appeared, why?, I don’t know exactly .

You and me know that most blogwalker use shoutmix for blogwalking, visiting from one blog to the other blog, or even using auto blogwalker application, so that you don’t wasted much time for it. To get more visitors back to our blog, we must leave many messages to the other shoutboxs, and the result, you leave almost the same message in every blogs you have visited.

I myself did what I mentioned above, I just copy and paste every time leaving message in the other blog, I thought this is the easy way to get more visitors back to my blog. I have received warning from shoutmix about leaving the same message within short periode, eg., about every 5 second we submit or shout message. Actually I think this is not error from shoutmix, it is the action taken by shoutmix to prevent spamming (leaving the same message within short periode), even worse shoutmix know that many blogwalker use shoutmix to click exchange ads, or well known as ki$$, or real $mile , I my self realized that I was happy when visitor left the message like that.

As I mentioned above, maybe…, I say maybe because I’m not sure that it’s really true, This condition is not Shoutmix error, Shoutmix currently working fine, but they have taken action to block such IP address that appeared to be spammer, so that you couldn’t leave your link in name, message or even link field.

To fix this problem, before blogwalking I setup my network to use proxy setting. Simply go to Tools menu > Options then choose Advanced, in Network tab click setting Connection (for firefox). Where can you find IP proxy? To get IP proxy go here, and find out anonymous proxy without name in proxy list.

Some proxy number sometimes not working properly, if this happened, please try to find out others. After blogwalking you can bring back your connection setting to No Proxy.

If you tired doing these, you can use the others shoutbox or chatbox service like cbox and oggix. This is final decision to avoid shoutmix error and I saw some blogwalker have move out from shoutmix and choose Cbox instead. If you have any idea please share to others, write down your comment below.

Blogwalking to Increase Alexa Rank via Shoutmix Chat, Increasing Traffic With Entrecard, Step by Step Upgrading Wordpress Manually

Related posts brought to you by Yet Another Related Posts Plugin.

Brief Description About Mesothelioma

hasan — Fri, 01 Jan 2010 15:10:15 +0000

Mesothelioma is a rare type of cancer that typically affects the lining of the lungs, heart and abdomen. This cancer occurs about four times more frequently in men than in women and all forms of mesothelioma, except for benign mesothelioma, are invariably fatal. Mesothelioma is an aggressive cancer that affects the mesothelium causing cells in the membrane to become cancerous and divide rapidly. This causes the thickening of the membrane, fluid buildup and the formation of tumors. This can result in difficulty breathing, nausea, fatigue and a myriad of other concerns.

What are the main causes of mesothelioma? Mesothelioma is most predominantly caused by asbestos exposure. Asbestos fibers that are inhaled through the mouth and nose may eventually become embedded in the lining of the lungs, causing damage and resulting in lung cancer or asbestosis (scar tissue formation in the lungs). It has also been found that swallowing asbestos fibers could contribute to a form of mesothelioma originating in the abdomen called peritoneal mesothelioma.

Mesothelioma generally results from occupational exposure but there are instances of environmental exposure to asbestos that can cause the disease. Oftentimes second hand exposure of a family member to an asbestos workers dirty work clothes can result in that family member developing mesothelioma.

Diagnosing mesothelioma is often difficult, because the symptoms are similar to those of a number of other conditions. Diagnosis begins with a review of the patient’s medical history. A history of exposure to asbestos may increase clinical suspicion for mesothelioma. A physical examination is performed, followed by chest X-ray and often lung function tests. The X-ray may reveal pleural thickening commonly seen after asbestos exposure and increases suspicion of mesothelioma. A CT (or CAT) scan or an MRI is usually performed. If a large amount of fluid is present, abnormal cells may be detected by cytopathology if this fluid is aspirated with a syringe. For pleural fluid this is done by a pleural tap or chest drain, in ascites with an paracentesis or ascitic drain and in a pericardial effusion with pericardiocentesis. While absence of malignant cells on cytology does not completely exclude mesothelioma, it makes it much more unlikely, especially if an alternative diagnosis can be made (e.g. tuberculosis, heart failure).

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

YARPP, The Easy Way to Show Related Post

hasan — Tue, 29 Dec 2009 08:38:47 +0000

Related post is the other posts that have relation with the post you currently reading, as well as in tag, category or the words you use in the post (keywords). Generally, people shows their related post below the post currently reading, but of course they don’t place the other posts completely, they just place the links to them.

Showing your related post is very useful to attract your visitor to see the other posts, most targeted to the old posts. it will reduce your bounce rate. Bounce rate is the value of visitor that just visit one page of your blog, lower bounce rate increase your blog quality.

The other benefit of showing related post is to increase your inbound link. Inbound link is the link that direct to page or post in the same blog.

Sometimes, people modify their post template to show their related post, but for people that is not familiar with code it maybe become the obstacle.

Wordpress is powerful open source for blogging that supported with many plugins. There are many wordpress plugins to show related post below your post, such as related post, wordpress related post plugin, aizattos related post, yet another related post plugin (YARPP). At this time I will explain about Yet Another Related Post plugin, I think this is better than others about showing related post, some plugin sometimes shows related post under the post but in fact they has no relation with the post.

To start making related post with YARPP, follow these steps:

Download YARPP plugin here
Upload YARPP to your plugin directory.
Activate YARPP via your admin page.
Configure the setting of YARPP like the picture below.

Define the value of Match Threshold in , this parameter to measure relevance level between post. higher value will increase the relevancy and makes related post more selective, and you get less related post overall. If you have just a few post set this value to 2 or 3.
Check Consider option to increase appearance of related post.

At Display options for your website section, set the value of Maximum Number of Related Post

Related post by default appear with number, you can change this with bullet or any other style. For instance, if you want to change to bullet instead of number, change the Before / after related entries: with the code below, change also the text of Related post with Similar post

Step by Step Upgrading Wordpress Manually

hasan — Thu, 19 Nov 2009 03:35:33 +0000

As we know that wordpress grows time to time, and develop the existence version to new one, so everything become better. There are two ways to upgrade wordpress, automatically and manually. To update wordpress automatically, you need just by clicking the link in new update banner, in the top of your admin page with the anchor text please update now. You can also upgrade automatically by going to Tools then select Upgrade menu. Update automatically is very simple than upgrade manually, it is very important to backup your database first before doing upgrade.

Sometimes, we find error during upgrading wordpress automatically such can not write file to the server host or any other reason. In this way, upgrading wordpress manually is your choice, although this need your patient during uploading files to your file hosting.

In this post, I use the Byethost service as my hosting files, but generally upgrading wordpress manually is about the same. To start upgrading wordpress manually you can follow the step by step below:

Step 1: You should back up your database. To back up your database ussually this file in sql format, you should go to your phpmyadmin page, and export database to your local drive, to make it easier, ensure that you export in compressed file. This is very important just in case something goes wrong, so you can easily restore your database.

Step 2: Download the latest version of wordpress to replace your old wordpress files and folders.

Step 3 : Extract wordpress zip file, you will find the three main folder of wordpress (wp-admin, wp-content, wp-includes), and the main root files such as index.php, wp-cron.php, wp-login.php and others, it is maybe about 23 files.

Step 4: Compress the main folder of wp-admin and wp-includes except wp-content, so you have wp-admin.zip and wp-includes.zip

Step 5: Login to your hosting Cpanel, and select file manager.

Step 6: Upload wp-admin.zip and wp-includes.zip to the your main root (public_html).

Step 7: Rename folder wp-admin and folder wp-includes, example: wp-adminold and wp-includesold. Renaming this folder is more easily instead of moving these folder to other location. Both renaming and moving these folder have same objective, to backup your folder. You can delete the old folder after you succeed upgrading to new version.

Step 8: Extract or unzip wp-admin.zip and wp-includes.zip to the main root folder (public_html). So you have new wp-admin and wp-includes folder.

Step 9: Overwrite files in your main root (public_html) with new wordpress files, about 23 files (as mentioned in the step 3). Don’t change or delete other files that have no related with upgrading wordpress, example: sitemap.xml, .htaccess, or any other files for verification ownership.

Step 10: Visit your main WordPress admin page at /wp-admin. You may be asked to login again. If a database upgrade is necessary at this point, WordPress will detect it and give you a link to a URL like http://www.example.com/wp-admin/upgrade.php. Follow that link and follow the instructions. This will update your database to be compatible with the latest code.

Best Free Wordpress Themes For Download, How to Make a Blog Using Free Domain and Hosting, Making Indonesian Fake Earning

Related posts brought to you by Yet Another Related Posts Plugin.

Google Adsense Pin Finally Come True

hasan — Wed, 11 Nov 2009 13:22:35 +0000

Google Adsense Pin or Google Pin in short, has sticked in mind for several weeks. I have waited for this pin in very worried, I have read a lot of experience about sending of Google Pin that not arrived in their house. Do you have google adsense account?, Have you received your google pin? If you don’t have google adsense account, you can send your application, don’t forget to read tips before applying google adsense program.

Google Pin is the number that is sent by Google to Google adsense publisher when they have reached the value specified by Google, it is about $10, When I reached this value I thought that my Google Pin would be sent to my email, but in fact, Google Pin is sent to my house. Do you know why Google Pin is sent to publisher’s house? Google Pin is sent to their house to ensure that the address entered in their account is real, not fake, so you can receive your payment. After you receive this Pin you must enter to your account, Google will check the pin you entered, if pin you entered is match with pin that has been sent, Goolge conclude your house address is real.

Google Pin ussually arrive after 2-4 weeks, depending on your location, I received Google Pin after 3 weeks and 5 days. If you don’t receive your Google pin over 3 weeks you can send request for new sending pin. If you still not receive your pin after request 3 times you can send email to google adsense support, adsense-support@google.com, it is very important because google will replace paid advertisements on your blog with public service ads if you have not entered within 4 months, then google will disabled your account if you don’t enter your pin within 180 days or 6 months.

By sending google team email and you tell them the reason why you still have not entered your pin to your account, it will possible to google team to disable entering pin to your account, google may ask you to send them your valid identity such as Passport or Nation Identity Card. Before you send your email to google team, Kindly please check in your post office in your city.

Tips Before Applying Google Adsense Program, How to Make a Blog Using Free Domain and Hosting, Link Exchange is One Way to Increase Your Page Rank

Related posts brought to you by Yet Another Related Posts Plugin.

How to Make a Blog Using Free Domain and Hosting

hasan — Tue, 06 Oct 2009 16:00:09 +0000

I’m sure you already know what a blog is, Blog is contraction from Weblog, it is a type of website that maintained usually by personal people with regular basis of content or post. People use blog for some reasons such as express their activities, sharing information or knowledge with others, or even for individual business like introducing a product.

For people that is not familiar with internet, may have a question how to make a blog?. When start learning, it is not so bad for making a blog freely using free domain and free hosting. What is domain? domain is an identification label that defines a realm of administrative autonomy, authority, or control in the Internet, based on the Domain Name System (DNS). Hosting is internet service where you store data files of your blog, so that your blog can be accessed thru the World Wide Web.

There are many services that offer domain and hosting freely, but at this time I want to use Free Domain Co.cc and Free hosting ByetHost. The reasons why I used this free hosting are that Byet provides free FTP, PHP 5, MySQL and our very popular feature: The Automatic Script Installer (Like Fantastico) You can install many popular scripts such as PHPbb2 and PHPbb3, Wordpress, Zen-Cart, osCommerce, MyBB, UseBB, MyLittle Forum, 4images, Coppermine, SMF, Joomla, e107, XOOPS, PHP Wind, CuteNews, Mambo, WikiWig and many more! No need to wait a long time uploading files, Byet Automatic Script Installer deploys your files in seconds! You can find Byet Automatic Script Installer in the Vistapanel.

Let’s begin with Sign Up for free domain Co.cc by going to www.co.cc then click Create Account Now link, or go here. Fill the form for Username and Password and form Account Information like the pictures above. After you complete all fields, check I accept the Terms of Service and press Create an Account Now button. If you entered correct data, your account page will now appear.

Once you succeed creating Co.cc account, you can now create Co.cc name for your domain by pressing Getting a New Domain link. in the Search for available domain names box, enter your free domain name, e.g: justexample then press Check Availability to ensure whether domain name you entered has not been used by other people. If your domain name is available you can continue registration by pressing Continue to Registration button.

Once your domain name successfully registered, you should set up domain by pressing Set up button, or Domain Settings -> Manage Domain -> Select your domain -> Set Up. If you don’t set up registered domain within 48 hours, Co.cc will cancel the registration. In set up domain page there are 3 methods: Name Server, Zone Record, URL Forwarding, this time I will choose Name Server method, later you will enter name server related to your hosting.

The Next step, you should register to free hosting service, Byethost. Fill the blank fields, and ensure you enter valid email address, this will use to activate your account. Check your email, and find activation email in your inbox, click activation link given by Byethost. Account information has been created, save this information, you will need these information to manage your account and setup a blog.

Ok, now you have free domain and free hosting account. To start making a blog you should login to your Control panel, url listed. Enter your username and password. Your control panel page appear now, start by setting up domain first. In Domain menu, click Addon Domains, enter your free domain you have created in Co.cc, in my example I created justexample.co.cc then press Add Domain button. You should back to your Co.cc account to setup Name Server. In the picture below Byethost has 5 name server, enter these name server when setup domain, you should add 3 more name server, press Setup button after entering all 5 name server of Byethost.

We almost finish creating a blog, now you will install software for blog. In Software & Services, click i-Vista Easy Script Installation link. Select your destination in drop-down menu, then press Proceed button. In the next step you should select software, Byethost serves several software such as Wordpress, Joomla, Drupal, Zen Cart, etc. At this time you select wordpress 2.8 as your software, press Install Now button.

when selecting path, leave the field blank because we plan to install in root directory of justmyexample.co.cc, then press Complete Install button. Congratulation, you just successful created a blog with url justmyexample.co.cc, this is type non-www, if you want to change this blog become www.justmyexample.co.cc, simply go to admin page and change your blog url in setting page.

Domain Name Vs Your Earning, Adding Facebook Status to Your Blog, Adding YM Online Status to Your Blog

Related posts brought to you by Yet Another Related Posts Plugin.