Ultimate-Knowlegdesharelinks

List of college's Affiliated to Anna University - Coimbatore

noreply@blogger.com (Varuna) — Thu, 09 Dec 2010 12:33:00 +0000

Here is a list of all the college's which are affiliated to Anna University - Coimbatore. And also you can find the college code address of these colleges. The list include engineering colleges in Coimbatore, Erode, KRISHNAGIRI , Namakkal, Salem, THE NILGIRIS and Thiruppur

AFFILIATED TO ANNA UNIVERSITY - COIMBATORE

NAME OF INSTITUTION

1 COIMBATORE 744

Adithya Institute of Technology, S.F. No.348/1,

349/1, Kurumbapalayam Village, Coimbatore

641107

2 COIMBATORE 763

Akshaya College of Engineering and Technology,

Kinathukadavu, Coimbatore 642109

3 COIMBATORE 772

C M S College of Engineering and Technology,

S.F. No.1051,1056,1057, 1052/2,

Appachigoundenpathy, Kumittipatti, Coimbatore

641105

4 COIMBATORE 704

Coimbatore Institute of Engineering and

Information Technolgoy, Narasipuram Post,

Coimbatore 641109

5 COIMBATORE 7

Coimbatore Institute of Technology, Civil

Aerodrome Post, Coimbatore 641014

6 COIMBATORE 706

Dr. Mahalingam College of Engineering and

Technology, Mackinaickenpatti Post, Pollachi

642003

7 COIMBATORE 736

Dr. N G P Institute of Technology, Kalapatti

Road, Coimbatore 641035

8 COIMBATORE 749

EASA College of Engineering and Technology,

NH-47, Coimbatore-Palakkad Main Road,

Navakarai Post, Coimbatore 641105

9 COIMBATORE 5

Government College of Technology, Thadagam

Road, Coimbatore 641013

10 COIMBATORE 740

Hindustan Institute of Technology,

Othakkalmandapam, Coimbatore 641032

11 COIMBATORE 708

Hindusthan College Of Engineering and

Technology, Othakkalmandapam Post,

Coimbatore 641032

12 COIMBATORE 756

Indus College of Engineering, Kalimangalam,

Alandurai Village, Coimbatore 641101

13 COIMBATORE 732

INFO Institute of Engineering, Sarkar

Samakulam, Coimbatore - 641 107

14 COIMBATORE 769

J C T College of Engineering and Technology,

Pichanur, Coimbatore 641105

15 COIMBATORE 762

Jansons Institute of Technology, S. No. 443 / 1,2,

442 / 1A & 442 / 1B, Karumathampatty, Somaur,

Coimbatore District 641659

16 COIMBATORE 755

Jawaharlal Institute of Technology, Kaliapuram,

Thirumalayampalayam Post, Coimbatore 641105

17 COIMBATORE 764

K P R Institute of Engineering and Technology,

S.F.No. 204/2 & 204/2, &204/4, Kollupalayam

Village, Arasur Panchayat, Coimbatore 641407

18 COIMBATORE 750

Kalaignar Karunanidhi Institute of Technology,

SF No.282-283, Kannampalayam, Coimbatore

641402

19 COIMBATORE 770

Kalaivani College of Technology, No.1/2 A, 1,

Alagunachiamman Kovil Road, Palathurai Post,

Madukkarai 641105, Coimbatore District

20 COIMBATORE 710

Karpagam College of Engineering,

Othakkalmandapam, Coimbatore 641032

21 COIMBATORE 735

Karpagam Institute of Technology,

Seerapalayam Village, L&T By pass Road,

Coimbatore 641021

22 COIMBATORE 745

Kathir College of Engineering, S F No.812/1,

Neelambur, Avinashi Road, Coimbatore 641062

23 COIMBATORE 751

KGISL Institute of Technology, KGISL Campus,

365, Thudiyalur Road, Saravanampatti,

Coimbatore 641035

24 COIMBATORE 746

KTVR Knowledge Park for Engineering and

Technology, Billichi Post, Periya

Maddhampalayam, Mettupalayam Road,

Coimbatore 641019

25 COIMBATORE 712

Kumaraguru College of Technology,

Chinnavedampatti Post, Coimbatore 641006

26 COIMBATORE 730

Maharaja Inst of Technology, Arasur Post,

Coimbatore 641407

27 COIMBATORE 729

Nehru Institute of Engineering and Technology,

Thirumalayampalayam, Coimbatore 641105

28 COIMBATORE 741

P A College of Engineering and Technology,

Palladam Road, Pollachi 642002

29 COIMBATORE 753

P P G Institute of Technology, Vilankurichi

Village, Coimbatore 641035

30 COIMBATORE 716

Park College of Engineering and Technology,

Kaniyur, Coimbatore 641659

31 COIMBATORE 768

Park College of Technology, Prema Ravi Nagar,

Karumathampatty, Coimbatore 641059

32 COIMBATORE 774

Prahar School of Architecture, No.11/4, RVP

Complex, 4th Cross, Bharathi Park Road,

Saibaba Colony, Coimbatore 641011

33 COIMBATORE 6

PSG College of Technology, Peelamedu,

Coimbatore 641004

34 COIMBATORE 731

R V S College of Engineering and Technology,

Kannampalayam , Sulur, Coimbatore 641 402

35 COIMBATORE 776

R V S Faculty of Engineering, Kumaran Kottam

Campus, Trichy Road, Kannampalayam,

Coimbatore 641 402

36 COIMBATORE 778

R V S School of Architecture, Kumaran Kottam

Campus, Trichy Road, Kannampalayam,

Coimbatore 641 402

37 COIMBATORE NEW

Ranganathan Architecture College, Viraliyur

Post, Thondamuthur Via, Coimbatore 641109

38 COIMBATORE 737

Ranganathan Engineering College,

Zahirnaickenpalayam Village, Viraliyur Post,

Thondamuthur Via, Coimbatore 641109

39 COIMBATORE 734

S N S College of Engineering, Sathy Main Road,

Kurumbapalayam Post, Coimbatore 641107

40 COIMBATORE 726

S N S College of Technology, Kalappatti Post,

Coimbatore 641035

41 COIMBATORE 743

S S K College of Engineering and Technology,

NH47, Palakkad Main Road, Pitchanur

Panchayat, Navakkarai Post, Coimbatore 641105

42 COIMBATORE 654

S V S College of Engineering, Asarampalayam

Post, Pollachi 642109, Coimbatore District

43 COIMBATORE 738

Sasurie Academy of Engineering,

Kariyampalayam Post, Sathy Road, Coimbatore

641653

44 COIMBATORE 739

Sri Eshwar College of Engineering, Kondampatti

Post, Vadasithur (Via), Kinathukadavu,

Coimbatore District 641202

45 COIMBATORE 718

Sri Krishna College of Enginering and

Technology, Kuniamuthur, Coimbatore 641008

46 COIMBATORE 719

Sri Ramakrishna Engineering College,

Vattamalaipalayam, Coimbatore 641022

47 COIMBATORE 725

Sri Ramakrishna Institute of Technology,

Pachapalayam, Coimbatore 641010

48 COIMBATORE 727

Sri Shakthi Institute of Engineering and

Technology, Sri Shakthi Nagar, L&T Bye-Pass,

Venkitapuram Post, Comibatore 641014

49 COIMBATORE 765

Sriguru Institute of Technology, Varathaiyanagar

Palayam, Kondayampalayam Post, Coimbatore

District 641110

50 COIMBATORE 721

Tamilnadu College of Engineering,

Karumathampatti Post, Coimatore 641659

51 COIMBATORE 728

Tamilnadu School of Architecture,

Karumathampatti Post, Coimbatore 641659

52 COIMBATORE 757

TEJAA Shakthi Institute of Technology for

Women, NH-47, Avinashi Main Road,

Karumathampatti, Coimbatore District 641659

53 COIMBATORE 761

United Institute of Technology, S.P.No. 829 &

830, Gadalore Village, Perianaickenpalayam,

Coimbatore District 641020

54 COIMBATORE 722

V L B Janakiammal College of Engineering and

Technology, Kovaipudur Post, Coimbatore

641042

55 DHARMAPURI 640

Jayalakshmi Institute of Technology, Thoppur

635352, Dharmapuri District

56 DHARMAPURI 606

Jayam College of Engineering and Technology,

Nallanur Post, Dharmapuri 636813

57 DHARMAPURI 616

Sapthagiri College of Engineering, Periyanahalli

Post, Dharmapuri 635205

58 DHARMAPURI 641

Varuvan Vadivelan Institute of Technology,

Nallanahalli, Dharmapuri District 636701

59 ERODE 652

Al-Ameen Engineering College, Karundevan

Palayam, Nanjai Uthukuli Post, Erode 638104

60 ERODE 702

Bannari Amman Institute of Technology,

Sathyamanagalam, Erode 638401

61 ERODE 707

Erode Sengunthar Engineering College,

Thudupathi Post, Erode 638057

62 ERODE 709

Institute of Road and Transport Technology,

Vasavi College Post, Erode 638316

63 ERODE 758

J K K Muniraja College of Technology, T N

Palayam, Gobi Taluk, Erode District 638506

64 ERODE 711

Kongu Engineering College, Perundurai, Erode

638052

65 ERODE 713

M P Nachimuthu M Jagannathan Engineering

College, Chennimalai, Erode 638112

66 ERODE 742

Maharaja Engineering College for Women, Erode

Road, Perundurai 638052

67 ERODE 752

Nandha College of Technology, 235,

Chennimalai Palayam Road,

Pitchandampalayam Post, Erode 638052

68 ERODE 715

Nandha Engineering College,

Pitchandampalayam Post, Erode 638052

69 ERODE 747

Shree Venkateshwara Hi-Tech Engineering

College, Sri Kalaivani Nagar, Othakuthirai, K

Mettupalayam Post, Gobichettipalayam, Erode

District 638455

70 ERODE 754

Sri Ramanathan Engineering College, Uthukuli

Main Road, Nadupatti Post, Erode District

638056

71 ERODE 748

Surya Engineering College, Mettukadai,

Kathirampatti Post, Erode 638107

72 ERODE 723

Velalar College of Engineering and Technolgoy,

Thindal Post, Erode 638009

73 KARUR 630

Chettinad College of Engineering and

Technology, NH-67, Trichy Main Road, Puliyur C

F, Karur District 639114

74 KARUR 608

M Kumarasamy College of Engineering,

Thalavapalayam, Karur 639113

75 KARUR 655

V K S College of Engineering and Technology,

Desiyamangalam Village, Sivayam South

Panchayat, Krishnarayapuram 639120, Karur

District

76 KARUR 622

V S B Engineering College, Kovai Road, Karur

639111

77 KRISHNAGIRI 601

Adhiyamaan College of Engineering, Hosur,

Krishnagiri 635109

78 KRISHNAGIRI 668

Archana Instittue of Technology,Thimmapuram

Post & Village, Kaveripattinam Via, Krishnagiri

Taluk and District 638112

79 KRISHNAGIRI 621

Er. Perumal Manimekalai College of Engineering,

Near Koneripalli, Hosur 635117

80 KRISHNAGIRI 603

Government College of Engineering, Bargur

635104

81 KRISHNAGIRI 642

P S V College of Engineeering and Technology,

Mittapalli, Balinayanapalli Post, Elathagiri,

Krishnagiri District

82 NAMAKKAL 602

Annai Mathammal Sheela Enginereing College,

Erumapatty Post, Namakkal 637013

83 NAMAKKAL 635

C M S College of Engineering, Emapuram Post,

Namakkal District 637003

84 NAMAKKAL 662

Dr. Nagarathinam's College of Engineering,

Kosavam Pallikodu, Anadhagoundam Palayam,

Minakkal Post, Rasipuram, Namakkal District

637505

85 NAMAKKAL 667

Excel College of Architecture and Planning,

NH47, (New) Salem Main Road, Pallakapalayam,

Sankari West Post, Tiruchengode Taluk,

Namakkal District 637303

86 NAMAKKAL 664

Excel College of Engineering and Technology,

Salem Main Road, NH-47, New Pallakapalayam,

Sankari West Post, Namakkal District 637303

87 NAMAKKAL 637

Excel College of Engineering for Women, Salem

Main Road, New NH-47, Pallakkapalayam,

Komarapalayam 637303

88 NAMAKKAL 634

Excel Engineering College, Salem Main Road,

NH-47, New Pallakkapalayam Village,

Komarapalayam, Namakkal District 637303

89 NAMAKKAL 660

Gnanamani College of Engineering, NH-7, A K

Samuthiram, Pachal Post, Namakkal District

637018

90 NAMAKKAL 624

Gnanamani College of Technology, Pachal Post,

Namakkal 637018

91 NAMAKKAL 647

J K K Nataraja College of Engineering and

Technology, Komarapalayam Amani,

Thattankuttai Panchayat, Namakkal District

638183

92 NAMAKKAL 613

K S R College of Engineering, Tiruchengode

637209, Namakkal District

93 NAMAKKAL 607

K S Rangasamy College of Technology,

Tiruchengode 637209, Namakkal District

94 NAMAKKAL 631

King College of Technology, Nallur, N Pudupatty

Post, Namakkal District 637020

95 NAMAKKAL 638

Mahendra Engineering College for Women,

Kumaramangalam, Namakkal Road,

Tiruchengode 637205, Namakkal District

96 NAMAKKAL 609

Mahendra Engineering College, Mahendhirapuri,

Namakkal District 637503

97 NAMAKKAL 665

Mahendra Institute of Engineering and

Technology, Mahendrapuri, Vadugapalayam,

Mallasamudram, Tiruchengode 637503

98 NAMAKKAL 632

Mahendra Institute of Technology,

Mallasamudram West, Tiruchengode, Namakkal

637 503

99 NAMAKKAL 610

Muthayammal Engineering College, Rasipuram

637408, Namakkal District

100 NAMAKKAL 612

P G P College Of Engineering and Technology,

Paramathi Post, Namakkal District 637207

101 NAMAKKAL 628

Paavai College of Engineering, NH-7, Pachal

Post, Namakkal 637018

102 NAMAKKAL 611

Paavai Engineering College, NH-7, Pachal Post,

Namakkal 637018

103 NAMAKKAL 657

Pavai College of Technology, S.No. 19/1, 18/1B,

2B & 2C, 13/1C. 12/4C & 9/1B & 2B. NH.7,

Salem-Namakkal Highways, Pachal 637018,

Namakkal District

104 NAMAKKAL 614

S S M College of Engineering, Komarapalayam

638183, Namakkal District

105 NAMAKKAL 627

Selvam College of Technology,

Pappanaickenpatti Post, Namakkal District

637003

106 NAMAKKAL 629

Sengunthar College of Engineering for Women,

Tiruchengode, Namakkal District 637205

107 NAMAKKAL 617

Sengunthar Engineering College, Tiruchengode

637205, Namakkal District

108 NAMAKKAL 767

SRG Engineering College, Aniyapuram Post,

Namakkal District 637017

109 NAMAKKAL 633

Vidhya Vikkas College of Engineering and

Technology, Varahoorampatti, Tiruchengode,

Namakkal Dist. - 637 214

110 NAMAKKAL 620

Vivekanandha College of Engineering for

Women, Tiruchengode, Namakkal District

637205

111 NAMAKKAL 661

Vivekanandha College of Technology for

Women, Sathinaickenpalayam, Elayampalayam

Village, Kumaramangalam 637205

112 NAMAKKAL 626

Vivekanandha Institute of Engineering and

Technology for Women, Sathiyanaickenpalayam,

Tiruchengode 637205, Namakkal District

113 SALEM 636

A V S Engineering College, Military Road,

Ammapet, Salem 636003

114 SALEM 643

Bharathiyar Institute of Engineering for Women,

Deivayakurichi 636112, Attur Taluk, Salem

District

115 SALEM 615

Government College of Engineering, Salem

636011

116 SALEM 644

Greentech College of Engineering for Women,

240/3, Salem-Cuddalore Main Road,

Appamasamudram Village, Narasingapuram

Post, Attur Taluk, Salem District

117 SALEM 653

Knowledge Institute of Technology, KIOT

Campus, Kakapalayam Post, Salem District

637504

118 SALEM 623

Maha College of Engineering, Attur Road,

Minnampalli, Salem 636106

119 SALEM 639

Narasu's Sarathy Institute of Technology,

Poosaripatty Village, Omalur Taluk, Salem

636305

120 SALEM 645

Rabindhranath Tagore College of Engineering for

Women, SF No.27, NH-47, Salem-Kovai Express

Highway, Veerachipalayam Village, Sankari

Taluk, Salem District 637303

121 SALEM 761

S R S College of Engineering & Technology,

Kuppanoor Village, Salem 636111

122 SALEM 659

Salem College of Engineering and Technology,

Salem-Attur Main Road, NH-68, Mettupatty

Perumapalayam, Salem 636111

123 SALEM 618

Sona College of Technology, Suramangalam

Post, Salem 636005

124 SALEM 646

Tagore Institute of Engineering and Technology,

Deviyakurichi 636112, Attur Taluk, Salem District

636112

125 SALEM 666

The Kavery College of Engineering, M Kalipatti,

Mecheri, Mettur Taluk, Salem District 636453

126 SALEM 625

The Kavery Engineering College, M Kalipatti

Post, Mecheri 634453, Salem District

127 SALEM 658

V S A Educational and Charitable Trust's Group

of Institutions, NH-47, Uthamasola Puram Post,

Salem 636010

128 THE NILGIRIS 705

C S I College of Engineering, Ketti, The Nilgiris

643215

129 THE NILGIRIS 959

McGan's Ooty School of Architecture, No.204,

Summer House, Summer House Road, Ooty,

The Nilgiris - 643001

130 TIRUPPUR 733

Angel College of Engineering and Technology,

P.K.Palayam, Ugayanur Village, Tirupur 641 665

131 TIRUPPUR 771

Dr. Nalini Institute of Engineering and

Technology, No.68, Ram Nagar, Palani Road,

Achiyur Post, Kolathupalayam Village,

Dharapuram 638673, Tiruppur District

132 TIRUPPUR 656

Erode Builder Educational Trust's Group of

Institutions, Nathakadaiyur, Palayakottai Village,

Kangeyam, Tiruppur District 638108

133 TIRUPPUR 651

Jai Sriram College of Technology, Dharapuram

Road, Avinashi Palayam, Tiruppur District

638660

134 TIRUPPUR 714

Maharaja Engineering College, Avinashi,

Tiruppur District 641654

135 TIRUPPUR 724

Maharaja Prithvi Engineering College, Avinashi,

Tiruppur District 641654

136 TIRUPPUR 717

Sasurie College of Engineering,

Vijayamangalam, Tiruppur District 638056

Other Links in The blog:

List of college's Affiliated to Anna University - Chennai

noreply@blogger.com (Varuna) — Thu, 09 Dec 2010 12:11:00 +0000

Here is a list of all the college's which are affiliated to Anna University - chennai. And also you can find the college code address of these colleges. The list include engineering colleges in chennai, Kanchipuram/kancheepuram, Vellore, Villupuram, Thiruvannamalai,

Place College code College Name Address

1 CHENNAI 321

Central Institute of Plastics Engineering and Technology (CIPET), Government of India,Guindy, Chennai 600032

2 CHENNAI 105

J A Institute of Engineering & Technology, No.42,2nd Street, Srinivasa Nagar, Koyambedu,Chennai 600107

3 CHENNAI 308

Measi Academy of Architecture , Royapettah,Chennai 600 014

4 CHENNAI 509

Meenakshi College of Engineering, No.12,Vembuliamman Koil Street, K K Nagar (West) ,Chennai 600078

5 CHENNAI 309

Meenakshi Sundararajan Engineering College, Kodambakkam, Chennai 600024

6 KANCHEEPURAM 323

A C T College of Engineering and Technology, Nelvoy Village, Pukkathurai Post,Maduranthagam, Kancheepuram District 603107

7 KANCHEEPURAM 232

A R M College of Engineering and Technology, Sattamangalam, Maraimalainagar, Chengleput, Kancheepuram District 603203

8 KANCHEEPURAM 233

Adhi College of Engineering and Technology, Pazhayaseevaram, Madura Sankarapuram Village, Kancheepuram District

9 KANCHEEPURAM 401

Adhiparasakthi Engineering College, Melmaruvathur 603319, Kancheepuram District

10 KANCHEEPURAM 331

Aksheya College of Engineering, Puludivakkam Village, Madhurantagam Taluk, Kancheepuram, District 603314

11 KANCHEEPURAM 228

Alpha College of Engineering, Dr. Grace George Nagar, Udayavar Koil Street, Thirumazhisai,Poonamalle, Chennai 602107

12 KANCHEEPURAM 303

Anand Institute of Higher Technology, OldMahabalipuram Road, Kazhipattur 603103

13 KANCHEEPURAM 230

Apollo Engineering College, Mevaloorkuppam, Valarpuram Post, Sriperumpudur, Kancheepuram Dt. 602 105

14 KANCHEEPURAM 201

Arignar Anna Institute of Science and Technology, Pennalur, Sriperumpudur Taluk, Kancheepuram,-602105

15 KANCHEEPURAM 423

Asan Memorial College of Engineering and Technology, Oragadam Post, Irumbedu Post, Chengleput 603105

16 KANCHEEPURAM 435

Balaji Institute of Engineering and Technology, Thandalam Village, Thiruporur, Kancheepuram District 603110

17 KANCHEEPURAM 334

Balamani Arunachalam Educational & Charitable Trust's Group of Institution, Sattamangalam, Maraimalai Nagar Post, Chengalpul Taluk, Kancheepuram District 603209

18 KANCHEEPURAM 336

Chennai Institute of Science and Technology for Women, Palaveli Village, Chengalpattu Taluk, Kancheepuram District

19 KANCHEEPURAM 202

D M I College of Engineering, Palanchoor,

Nazrethpet, Chennai 602103

20 KANCHEEPURAM 424

Dhaanish Ahmed College of Engineering,

Padappai, Chennai 601301

21 KANCHEEPURAM 405

Dhanalakshmi College of Engineering,

Manimangalam, Chennai 601301

22 KANCHEEPURAM 322

Dhanalakshmi Srinivasan College of Engineering

and Technology, East Coast Road, Poonjeri,

Chennai 603104

23 KANCHEEPURAM 406

Dr. Paul's Engineering College, Pauls Nagar,

Pulichapallam Village, Vanur (Tk), Villupuram

District 605109

24 KANCHEEPURAM 304

Easwari Engineering College, Ramapuram,

Chennai 600089

25 KANCHEEPURAM 407

G K M College of Engineering and Technology,

Alappakkam-Mappedu Road, Chennai 600063

26 KANCHEEPURAM 429

Gopal Ramalingam Memorial Engineering

College, Panappakkam, Near Padappai, Chennai

601301

27 KANCHEEPURAM 234

Indira Gandhi College of Engineering and

Technology for Women, Athur Village,

Chengalpattu-Kancheepuram High Road,

Kancheepuram District 603101

28 KANCHEEPURAM 235

JEI Mathaajee College of Engineering,

Vishakandikupam Village, Kancheepuram District

631552

29 KANCHEEPURAM 306

Jeppiar Engineering College, Jeppiaar Nagar, Old

Mahaopaliburam Road, Chennai - 600119

30 KANCHEEPURAM 307

Jerusalem College of Engineering,

Narayanapuram, Chennai 601302

31 KANCHEEPURAM 311

K C G College of Technology, Karappakkam,

Chennai 600096

32 KANCHEEPURAM 204

Kalsar College of Engineering, Sriperumpudur

Taluk, Kancheepuram 602105

33 KANCHEEPURAM 208

Kanchi Pallavan Engineering College, kolivakkam,

Kancheepuram 631502

34 KANCHEEPURAM 409

Karpagavinayaga College of Engineering and

Technology, Palayanoor Post, Maduranthagam

(TK), Kancheepuram District 603308

35 KANCHEEPURAM 207

Kings Engineering College, Sriperumpudur Taluk,

Kancheepuram 602105

36 KANCHEEPURAM 443

Lord Ayyappa Institute of Engineering and

Technology, Uthukadu, Walajabad,

Kancheepuram District 631605

37 KANCHEEPURAM 205

Lord Venkateshwara Engineering College,

Walajabad Post, Kancheepuram 631605

38 KANCHEEPURAM 225

Loyola Institute of Technology, Mevaloorkuppam,

B Village, Palanchoor, Nazarethpet Post, Chennai

602103

39 KANCHEEPURAM 206

Maamallan Institute of Technology,

Vadamangalam Post, Kancheepuram 602105

40 KANCHEEPURAM 411

Madha Engineering College, Kundrathur, Chennai

600069

41 KANCHEEPURAM 243

Madha Institute of Engineering and Technology,

Erandamkattalai Village, Sadhananthapuram,

Thandalam Post, Chennai 602101

42 KANCHEEPURAM 310

Misrimal Navajee Munoth Jain Engineering

College, Thorappakkam, Chennai 600096

43 KANCHEEPURAM 301

Mohamed Sathak A J College of Engineering, Old

Mahabalipuram Road, Egattur, Kancheepuram

District 603103

44 KANCHEEPURAM 431

New prince Shri Bhavani College of Engineering

and Technology, Vengaivasal Main Road,

Gowrivakkam, Chennai 600073

45 KANCHEEPURAM 222

P B College of Engineering, Irungkattukottai,

Sriperumpudur Taluk, Kancheepuram 602105

46 KANCHEEPURAM 226

P T Lee Chengalvaraya Naicker College of

Engineering and Technology, Oovery, Veliyur

Post, Kancheepuram 631 502

47 KANCHEEPURAM 209

Pallavan College of Engineering,

Thimmasamudram, Kancheepuram 631502

48 KANCHEEPURAM 210

Panimalar Engineering College, Nazarethpet,

Poonamallee, Chennai 602103

49 KANCHEEPURAM 231

Panimalar Institute of Technology, No.391,

Bangalore Trunk Road, Varadharajapuram,

Poonamallee, Chennai 602103

50 KANCHEEPURAM 525

Podhigai College of Engineering and Technology,

Vinayakapuram, Adiyur Post, Tirupattur Taluk,

Tirupattur 635601, Vellore District

51 KANCHEEPURAM 442

Prince Dr. K Vasudevan College of Engineering

and Technology, Medavakkam-Mambakkam

Road, Ponmar Village & Post, Chennai 600048

52 KANCHEEPURAM 414

Prince Shri Venkateshwara Padmavathy

Enginering College, Ponmar, Chennai 600048

53 KANCHEEPURAM 211

Rajalakshmi Engineering College, Thandalam,

Sriperumpudur Taluk, Kancheepuram 602105

54 KANCHEEPURAM 432

Rajalakshmi Institute of Technology,

Irulapalayam, Kuthampakkam Post 602107

55 KANCHEEPURAM 212

Rajiv Gandhi College of Engineering, Nemili,

Sriperumpudur Taluk, Kancheepuram 602105

56 KANCHEEPURAM 437

Rrase College of Engineering, Vanchuvancherry,

Tambaram-Kancheepuram, Padappai, Chennai

601301

57 KANCHEEPURAM 213

S K R Engineering College, Poonamallee,

Chennai 602103

58 KANCHEEPURAM 214

Sakthi Mariamman Engineering College,

Narayanasamy Nagar, Thandalam, Chennai

602105

59 KANCHEEPURAM 216

Saveetha Engineering College, Thandalam,

Sriperumpudur Taluk, Kancheepuram 602105

60 KANCHEEPURAM 313

Shree Motilal Kanhaiyalal Fomra Institute of

Technology, Old Mahabalipuram Road,

Kancheepuram 603103

61 KANCHEEPURAM 417

Shri Andal Alagar College of Engineering,

Mamandur, Kancheepuram 603111

62 KANCHEEPURAM 242

Sree Sastha College of Engineering,

Chembarambakkam Village Road,

Chembarambakkam, Kancheepuram District

602103

63 KANCHEEPURAM 217

Sree Sastha Institute of Engineering and

Technology, Chembarambakkam, Chennai

602103

64 KANCHEEPURAM 427

Sri Krishna Engineering College, Panappakkam,

Near Padappai, Chennai 601301

65 KANCHEEPURAM 335

Sri Krishna Institute of Technology,

Navaneedham Nagar, Panapakkam, Near

Padappai (Via) Tambaram, Chennai 601301

66 KANCHEEPURAM 418

Sri Lakshmi Ammal Engineering College,

Selaiyur, Chennai 600073

67 KANCHEEPURAM 218

Sri Muthukumaran Institute of Technology, Near

Mangadu, Chennai 600069

68 KANCHEEPURAM 220

Sri Padmavathy College of Engineering,

Mevalurkuppam, Bangalore High Road,

Valarpuram Post, Kancheepuram District 602107

69 KANCHEEPURAM 426

Sri Ramanujar Engineering College, Vandalur,

Kolappakkam, Chennai 600048

70 KANCHEEPURAM 324

Sri Sai Ram Institute of Technology, Sai Leo

Nagar, Darkas Road, West Tambaram, Chennai

600044

71 KANCHEEPURAM 419

Sri Sairam Enginering College, West Tambaram,

Chennai 600044

72 KANCHEEPURAM 315

Sri Sivasubramaniya Nadar College of

Engineering, Kalavakkam, Old Mahabalipuram

Road, Kancheepuram 603110

73 KANCHEEPURAM 219

Sri Venkateswara College of Engineering,

Pennalur, Sriperumpudur Taluk, Kancheepuram

602105

74 KANCHEEPURAM 221

Srinivasa Institute of Engineering and

Technology, Parivakkam, Poonamallee, Chennai

600056

75 KANCHEEPURAM 320

SRR Engineering College, Old Mahabalipuram

Road, Kancheepuram 603103

76 KANCHEEPURAM 325

St. Joseph College of Engineering, Trinity

Campus, Nemili, Sriperumpudur, Kancheepuram

District 602105

77 KANCHEEPURAM 317

St. Joseph’s College of Engineering,

Semmancheri, Old Mahabalipuram Road,

Chennai 600119

78 KANCHEEPURAM 318

T J Institute of Technology, Karappakkam,

Chennai 600096

79 KANCHEEPURAM 420

Tagore Engineering College, Ratnamangalam,

Vandalur Post, Chennai 600048

80 KANCHEEPURAM 319

Thangavelu Engineering College, Karappakkam,

Chennai 600096

81 KANCHEEPURAM 326

The New Royal College of Engineering and

Technology, ECR, Poonjeri, Mamallapuram,

Kancheepuram District 603104

82 KANCHEEPURAM 517

Thirumalai Engineering College, Kilambi,

Kancheepuram 631551

83 KANCHEEPURAM 227

V K K Vilayan Engineering College, Chennai-

Bangalore NH4, Irungattukottai, Kancheepuram

District 602 105

84 KANCHEEPURAM 422

Valliammai Engineering College, Kattankulathur,

Chennai 603203

85 KANCHEEPURAM 316

Vel's Srinivasa College of Engineering and

Technology, Thalambur, Old Mahabalipuram

Road, Chennai 603103

86 KANCHEEPURAM 333

Vi Institute of Technology, No.96, Sirunkundram

Village & Post, Near Chengalpet, Chengalpet

Taluk, Kancheepuram District 603108

87 THIRUVANNAMALAI 524

Annamalaiar College of Engineering, Modaiyur

Village, Polur Taluk, Thiruvannamalai District

606902

88 THIRUVANNAMALAI 528

KRS College of Engineering, Elangadu,

Vandavasi Taluk, Thiruvannamalai District

604408

89 THIRUVANNAMALAI 529

Oxford College of Engineering, Venmani Village,

Karaipoondi Post, Polur Taluk, Thiruvannamalai

District 606803

90 THIRUVANNAMALAI 522

S K P Institute of Technology, Chinnakangiyanur,

Tiruvannamalai District 606611

91 THIRUVANNAMALAI 503

Arulmigu Meenakshi Amman College of Engg,

Vadamavandal,Thiruvannamalai 604410

92 THIRUVANNAMALAI 504

Arunai Engineering College, Mathur,

Tiruvannamalai 606603

93 THIRUVANNAMALAI 508

Kamban Engineering College, Mathur,

Tiruvannamalai 606603

94 THIRUVANNAMALAI 512

S K P Engineering College, Tiruvannamalai

606611

95 THIRUVANNAMALAI 513

Sri Balaji Chockalingam Engineering College, Arni

632317, Tiruvannamalai District

96 THIRUVANNAMALAI 518

Thiruvalluvar College of Engineering and

Technology, Vandavasi, Tiruvannamalai 604505

97 TIRUVALLUR 245

John Bosco Engineering College, Tiruvallur

Railway Station, Tiruvallur 602001

98 TIRUVALLUR 244

Sri Kalaimagal College of Engineering,

Kondancherry Village, Thiruvallur District 631402

99 TIRUVALLUR 241

T J S Engineering College, Peruvoyal, Near

Kavaraipettai, Gummidipoondi Taluk, Thiruvallur

District 601206

100 TIRUVALLUR 131

Vel Tech, No.60, Vel Tech Road, Avadi, Chennai

600062

101 TIRUVALLUR 101

Aalim Muhammed Salegh College of Engineering,

Muthapudupet, Avadi IAF Chennai 600055

102 TIRUVALLUR 238

B K R College of Engineering and Technology,

BKR Nagar, Chennai-Tirupathi Highway,

Perungalathur, Arakkonam, Tiruvallur District

103 TIRUVALLUR 102

Bhajarang Engineering College, Ayathur,

Veppampattu (R.S.), Thiruvallur 602024

104 TIRUVALLUR 123

Gojan School of Business and Technology,

Alamathi, Chennai 600062

105 TIRUVALLUR 229

Indira Institute of Engineering and Technology,

VGR Gardens, Pandur, Thiruvallur District, 631

203

106 TIRUVALLUR 126

J N N Institute of Engineering, Ushaa Garden,

No.90, Kannigaipair Village, Uthukottai Taluk,

Thiruvallur District 601102

107 TIRUVALLUR 106

Jaya Engineering College, Thirunindravur,

Chennai 602024

108 TIRUVALLUR 107

L C R College Of Engineering and Technology,

Kanchipadi Post, Thiruvallur 631204

109 TIRUVALLUR 108

Magna College of Engineering, Magaral, Chennai

600055

110 TIRUVALLUR 125

P M R Engineering College, Adayalampattu,

(Near Maduravoyil / Vanagaram), Chennai

600095

111 TIRUVALLUR 110

Prathyusha Institute of Technology and

Management, Aranvoyalkuppam, Tiruvallur

District 602 025

112 TIRUVALLUR 112

R M D Engineering College, Kavaraipettai,

Gummidipoondi 601206

113 TIRUVALLUR 128

R M K College of Engineering and Technology,

Puduvoyal, Gummidipoondi Taluk, Tiruvallur

District 601206

114 TIRUVALLUR 113

R M K Engineering College, Kavaraipettai,

Gummidipoondi 601206

115 TIRUVALLUR 114

S A Engineering College, Thiruverkadu Post,

Chennai 600077

116 TIRUVALLUR 416

Sakthi Engineering College, Thirunindravur,

Chennai 602024

117 TIRUVALLUR 124

SAMS College of Engineering and Technology,

Panappakkam, Chennai-Tirupathi Road,

Uthukkottai Taluk, Tiruvallur District 601102

118 TIRUVALLUR 115

Sri Ram Engineering College, Perumalpattu,

Veppampattu (R S), Tiruvallur District 602 024

119 TIRUVALLUR 116

Sri Venkateswara College of Engineering and

Technology, Thirupachur, Thiruvallur District

631203

120 TIRUVALLUR 121

Sri Venkateswara Institute of Science and

Technology, Kozhundalur, Thiruvallur 631203

121 TIRUVALLUR 127

St. Peter's College of Engineering and

Technology, College Road, Avadi, Chennai 600

062

122 TIRUVALLUR 122

Vel High Tech Sri Rangarajan Sakuunthala

Engineering College, No.60, Avadi-Alamathi

Road, Chennai 600062

123 TIRUVALLUR 118

Vel Multi Tech Sri Rangarajan Sakuunthala

Engineering College, No.42, Avadi-Alamathi

Road, Chennai 600062

124 TIRUVALLUR 120

Velammal Engineering College, Ambattur-Redhills

Road, Chennai 600066

125 TIRUVALLUR 237

Velammal Institute of Technology, Chennai-

Kolkatta Highway, Panchetti Village, Ponneri

Taluk, Tiruvallur District 601204

126 VELLORE 501

Adhiparasakthi College of Engineering, Kalavai

632506, Vellore District

127 VELLORE 519

Bharathidasan Engineering College, Nattrampalli

Post, Vellore 635852

128 VELLORE 505

C Abdul Hakeem College of Engineering and

Technology, Melvisharam, Vellore 632509

129 VELLORE 507

Ganadipathy Tulsi’s Engineering College,

Kaniyambadi, Vellore 632102

130 VELLORE 523

Global Institute of Engineering and Technology,

257/1, Bangalore-Chennai Highway,

Melvisharam, Walajah Taluk, Vellore District

632506

131 VELLORE 520

Kingston Engineering College, Chithoor Main

Road, Christianpet Village, Katpadi Taluk, Vellore

District 632059

132 VELLORE 510

Priyadarshini Engineering College, Vaniyambadi

Post, Vellore 635751

133 VELLORE 511

Ranippettai Engineering College,

Thenkadappanthangal, Vellore 632513

134 VELLORE 515

Saraswathi Velu College of Engineering,

Melvenkatapuram Village, Sholingur, Vellore

District 631102

135 VELLORE 526

Sri Krishna College of Engineering, Sri Krishna

Nagar, Tiruttani High Road, Arakkonam 631003,

Vellore District

136 VELLORE 514

Sri Nandhanam College of Engineering and

Technology, Tiruppattur, Vellore 635601

137 VELLORE 521

Sri Sapthagiri Institute of Technology, No.381,

MBT Road, Ocheri, Arakonam Taluk, Vellore

District 632 531

138 VELLORE 527

St. John's College of Engineering & Technology

for Women, Dharmavaram Road, Pennathur, T B

Sanatorium Post, Vellore District 632011

139 VELLORE 516

Thanthai Periyar Government Institute of

Technology, Bagayam, Vellore 632002

140 VILLUPURAM 441

A K T Memorial College of Engineering and

Technology, Neelamangalam Village, Kallakurichi

Post & Taluk, Villupuram District 606202

141 VILLUPURAM 436

A R Engineering College, Vadakuchipalayam,

Kappiyampuliyur Post, Villupuram District 605601

142 VILLUPURAM 402

Annai Terasa College of Engineering,

Thirunavalur, Villupuram 607204

143 VILLUPURAM 428

E S College of Engineering and Technology,

Chennai Trunk Road, Ayyankoilpattu, Villupuram

605602

144 VILLUPURAM 408

I F E T College of Engineering,

Gangarampalayam, Villupuram 605108

145 VILLUPURAM 605

Idhaya Engineering College for Women,

Chinnasalem, Villupuram 606201

146 VILLUPURAM 430

Maha Bharathi Engineering College, A

Vasudevanur, Chinnasalem, Kallakurichi Taluk,

Villupuram District 606201

147 VILLUPURAM 412

Mailam Engineering College, Mailam, Villupuram

604304

148 VILLUPURAM 433

Sri Aravindar Engineering College, Pondy-Mailam

Road, Sedarapet Post, Vanur Taluk, Villupuram

District 605111

149 VILLUPURAM 445

Sri Rangapoopathi College of Engineering,

Alampoondi Village, Gingee, Villupuram District

604151

150 VILLUPURAM 434

Surya College of Engineering and Technology,

Vikravandi, Villupuram District 605652

151 VILLUPURAM 421

V R S College of Engineering and Technology,

Arasur, Villupuram District 607107

Other Links in The blog:

Top Private and Government Colleges in India

noreply@blogger.com (Varuna) — Thu, 09 Dec 2010 12:09:00 +0000

Top Government and Private Engineering Colleges / Institutes in INDIA

Rank Name of Institute City

1 Indian Institute of Technology – IIT Kharagpur

2 Indian Institute of Technology – IIT Bombay

3 Indian Institute of Technology – IIT Kanpur

4 Indian Institute of Technology – IIT Delhi

5 Indian Institute of Technology – IIT Madras

6 Birla Institute of Technology & Science – BITS Pilani

7 Indian Institute of Technology – IIT Roorkee

8 Institute of Technology, Banaras Hindu University - IT-BHU Varanasi

9 Indian Institute of Technology – IIT Guwahati

10 College of Engineering, Anna University Chennai

11 Indian School of Mines University – ISMU Dhanbad

12 Jadavpur University, Faculty of Engineering Calcutta

13 Birla Institute of Technology, Mesra Ranchi

14 Delhi College of Engineering – DCE Delhi

15 National Institute of Technology – NIT Trichy

16 National Institute of Technology – NIT Warangal

17 PEC University of Technology Chandigarh

18 National Institute of Technology – NIT Suratkal

19 PSG College of Technology Coimbatore

20 Bengal Engineering & Science University, Shibpur Howrah

21 Hapar Institute of Engineering & Technology Patiala

22 Motilal Nehru National Institute of Technology Allahabad

23 Netaji Subhas Institute of Technology – NSIT Delhi

24 Visvesvaraya National Institute of Technology – VNIT Nagpur

25 Indian Institute of Technology – IIT Hyderabad

26 Govt College of Engineering Pune

27 Indian Institute of Information Technology – IIIT Allahabad

28 National Institute of Technology – NIT Rourkela

29 Harcourt Butler Tech Institute Kanpur

30 Malaviya National Institute Of Technology – MNIT Jaipur

31 Sardar Vallabhbhai National Institute of Technology – SVNIT Surat

32 National Institute of Technology – NIT Calicut

33 Maulana Azad National Institute of Technology – MANIT Bhopal

34 Veermata Jijabai Technological Institute – VJTI Mumbai

35 College of Engineering Visakhapatnam

36 Manipal Institute of Technology Manipal

37 National Institute of Technology – NIT Kurukshetra

38 Coimbatore Institute of Technology Coimbatore

39 Vellore Institute of Technology – VIT Vellore

40 National Institute of Technology – NIT NIT

41 Jawaharlal Nehru Technological University – JNTU Hyderabad

42 National Institute of Technology – NIT Durgapur

43 R.V College Of Engineering – RVCE Bangalore

44 ICT Mumbai University Mumbai

45 Dhirubhai Ambani Institute of Infor.& Comm Tech – DAIICT Gandhinagar
46 Maharashtra Institute of Technology – MIT Pune

47 University Visvesvaraya College of Engineering – UVCE Bangalore

48 SSN College of Engineering Chennai

49 UCE, Osmania University Hyderabad

50 Nirma University of Science & Technology Ahmedabad

51 College of Engineering Trivandrum

52 Sardar Patel Coll of Engineering Mumbai

53 National Institute of Technology – NIT Hamirpur

54 PES Institute of Technology Bangalore

55 SRM Institute of Science & Technology Chennai

56 BMS College of Engineering Bangalore

57 Amrita Institute of Technology & Science Coimbatore

58 Shanmugha Arts Science Tech&ResearchAcademy –SASTRA Thanjavur
59 National Institute of Engineering Mysore

60 Bangalore Institute of Technology Bangalore

61 Chaitanya Bharathi Institute of Technology Hyderabad

62 MEPCO Schlenk Engineering College Sivakasi

63 ICFAI Institute of Science & Technology Hyderabad

64 Jawaharlal Nehru Technological University – JNTU Kakinada

65 SJ College of Engineering Mysore

66 National Institute of Technology – NIT Jalandhar

67 MS Ramaiah Institute of Technology Bangalore

68 Satyabhama Engineering College Chennai

69 Karunya University Coimbatore

70 Sri Ramdeobaba KN Engineering College Nagpur

71 Kongu Engineering College Erode

72 National Institute of Technology – NIT Raipur

73 SGS Institute of Technology & Science Indore

74 National Institute of Technology – NIT Patna

75 Indian Institute of Information Technology – IIIT Bangalore

Courtesy: Outlook

Sorry Guys

noreply@blogger.com (Varuna) — Thu, 09 Dec 2010 12:07:00 +0000

I am busy with my career all these days. Now i am back in business. I will address all your needs and see that this blog is accessed by the person who are in real need.

Good luck

Thank you,

Varuna

ECE EC1401 VLSI Desig Nov/Dec 2009

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 06:23:00 +0000

B.E/B.Tech Degree Examination,November/December 2009.
Seventh Semester
Electronics and Communication Engineering
EC 1401-VLSI DESIGN
(Common to B.E.(Part-Time) Sixth Semester Regulation 2005)
(Regulation 2004)

For more question paper of ECE Department CLICK HERE

Part A-(10*2=20 marks)
1.What are the different MOS layers?
2.What are the two types of layout design rules?
3.Define rise time and fall time.
4.What is a pull down device?
5.What are the difference between task and function?
6.What is the difference between === and == ?
7.What is CBIC ?
8.Draw an assert high switch condition if input = 0 and input =1.
9.What do you mean by DFT?
10.Draw the boundary scan input logic diagram.

Part B - (5*16=80 marks)

11.a) Discuss the steps involved in IC fabrication process.(16)
Or
b) Describe n-well process in detail.(16)

12.a)i)Explain the DC characteristics of CMOS inverter with neat sketch.(8)
ii)Explain channel length modulation and body effect.(8)
Or
b)i)Explain the different regions of operation in a MOS transistor.(10)
ii)Write a note on MOS models.(6)

13.a)Explain in detail any five operators used in HDL .(16)
Or
b)i)Write the verilog code for 4 bit ripple carry full adder.(10)
ii)Give the structural description for priority encoder using verilog.(6)

14.a)Explain in detail the sequence of steps to design an ASIC.(16)
Or
b)Describe in detail the chip with programmable logic structures.(16)

15.a)Explain in detail Scan Based Test Techniques.(16)
Or
b)Discuss the three main design strategies for testability.(16)

ECE Electronic Circuits I Dec 2009

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 06:04:00 +0000

ANNA UNIVERSITY – CHENNAI
B.E.\B.TECH.DEGREE-EXAMINATION-DECEMBER 2009
THIRD SEMESTER-ELECTRONICS &COMMUNICATIONS ENGG.
ELECTRONIC CIRCUITS-I

For more question paper of ECE Department CLICK HERE

PART A-(2*10=20)
1. Define stability factor.
2. Draw the fixed bias single stage transistor circuit.
3. Define CMRR.
4. Draw the small signal equivalent circuit of FET.
5. Two amplifiers having gain 20db and 40db are cascaded. Find the overall gain in db.
6. Define bandwidth.
7. What is theoretical maximum conversion efficiency of class A power amplifier.
8. What is distortion in power amplifiers.
9. Draw the full wave bridge rectifier circuit.
10. What are the advantages of SMPS over conventional regulators.

PART B-(5*16=80)

11. A) (i) For the transistor circuit in fig. find the Q-point. Vcc=15v, B=100, VBE=0.7V

(ii) Calculate the stability factor for a fixed bias circuit.
B) Discuss the various techniques of stabilization of Q-point in a transistor.

12. A) For the CC transistor amplifier circuit, find the expressions for input impedance and voltage gain. Assume suitable model for transistor. (Or)
B) (i) Discuss the working of a basic emitter coupled differential amplifier circuit (8)
(ii) Compare CB, CE and CC amplifiers. (8)

13. A) (i) Discuss the frequency response of multistage amplifiers. Calculate the overall upper and lower cutoff frequencies. (10)
(ii) Discuss the terms rise time and sag. (6) (Or)
B) Discuss the high frequency equivalent circuit of FET and hence derive gain bandwidth product for any one configuration.
14. A) (i) Derive the theoretical max conversion efficiency of class B power amplifier. (10)

(ii) Write short notes on power MOSFET amplifier. (6) (Or)
B) Describe the distortion in power amplifier and the methods to eliminate the same.

15. A) Explain the circuit of voltage regulator and also discuss the short circuit protection mechanism. (Or)
B) (i) Explain the power control method using SCR.
(ii) Design zener regulator for following specification Vin=8v to 12v; Vo=10v, RL=10kO. Assume that zener diode is ideal.

Other Links in The blog:

ECE Control System Dec 2009

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 04:17:00 +0000

ANNA UNIVERSITY – COIMBATORE
B.E.\B.TECH.DEGREE-EXAMINATION-DECEMBER 2009
FIFTH SEMESTER-ELECTRONICS & COMMUNICATION ENGG.
CONTROL SYSTEMS

For more question paper of ECE Department CLICK HERE

PART A-(2*20=40)
1. What is the use of mason’s gain formula.
2. Give two examples for open loop and closed loop systems.
3. What do you meant by analogous systems.
4. What are the frequency domain specifications.
5. What are the advantages and disadvantages of feedback control systems.
6. How can we classify second order system based on damping ratio.
7. Define gain margin.
8. Define resonant frequency.
9. State Routh stability criterion.
10. Define Nyquist stability criterion.
11. What are the difference between state space analysis and Transfer function analysis.
12. What are root loci.
13. What is servomechanism.
14. What are the different types of controller.
15. What is synchro.
16. Name the test signals used in control systems.
17. What is polar plot.
18. Give examples for frequency response plot.
19. Write down state mode and output model of state space systems.
20. What do you mean by decomposition of transfer function.

PART B-(5*12=60)

21. A) A unity feedback system has an open loop transfer function G(s)=k/s(s+10). If the damping ratio is 0.5 determine (i) the value of k, (ii) peak overshoot, (iii) time to peak overshoot, (iv) settling time. (8) B) For a unity feedback whose G(s)=1/s(s+1) the input signal is r(t)= 4+6t+2t3. Find the generalized error coefficients. (4)
22. For the given block diagram find corresponding signal flow graph and evaluate closed loop transfer function relating to output and input.
23. Determine the value of k for a unity feedback control system have open loop transfer function G(s)H(s)=k/s(s+2)(s+4) such that (i)gain margin =20db (ii) phase margin =600.
24. Investigate the F(s) for stability using RH criterion (i) F(s) =s4+ks2+(k+1)s+2 (ii) F(s)=s4+s3+3s2+s+6 (iii) F(s)=s5+s4+2s3+2s2+6s+6
25. Obtain the state space model of the system with transfer function C(s)=s2+3s+2
in phase Variable form. R(s) s2+7s+12
26. A system characterized by the following state equation
Find (i) Transfer function of the system (ii) State transition matrix.
27. Sketch the root locus for the system with characteristic equation 1+G(s)H(s)=K(s+2)(s+3)
(s+1)(s-1)
28. Find transfer function of field controlled DC servo motor.

Other Links in The blog:

ECE Digital Signal Processing Dec 2009

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 04:14:00 +0000

ANNA UNIVERSITY – COIMBATORE
B.E.\B.TECH.DEGREE-EXAMINATION-DECEMBER 2009
FIFTH SEMESTER-ELECTRONICS & COMMUNICATION ENGG.
DIGITAL SIGNAL PROCESSING

For more question paper of ECE Department CLICK HERE

PART A-(2*20=40)

1. Define twiddle factor of FFT.
2. The first five DFT coefficients of a sequence x(n) are X(0)=20, X(1)=5+j2, X(2)=0, X(3)=0.2+j0.4, X(4)=0. Determine the remaining DFT coefficients.
3. Calculate the number of multiplications needed in the calculation of DFT and FFT with 64-point sequence.
4. What is zero padding. What are its uses.
5. What are the desirable and undesirable features of FIR filters.
6. What is the necessary and sufficient condition for linear phase characteristics in FIR filter.
7. Define Gibb’s phenomenon.
8. Draw the direct form I structure for the second order system function
H(z)= b0+b1z-1+b2z-2
1+a1z-1+a2z-2
9. Find the digital filter transfer function H(z) by using impulse invariant method.
for the analog transfer function H(s)=1/(S+2).
10. Give any two properties of Butterworth filter.
11. What is warping effect. What is the effect on magnitude and phase responses.
12. Mention any two procedures for digitizing the transfer function of an analog filter.
13. What are the quantization errors due to finite word length registers in digital filters.
14. What is overflow oscillations. What are the methods to prevent it.
15. Define a Deadband of a filter.
16. The filter coefficient H=-0.673 is represented by sign magnitude fixed point arithmetic. If the word length is 6 bits, compute the quantization error due to truncation.
17. What are the addressing modes of TMS320C50.
18. What is the advantage of Harvard architecture of TMS320 series.
19. What is the different buses of TMS320C50.
20. What are the arithmetic instructions of C50.

PART B-(5*12=60)

21. A) Find the 8 point DFT of the given sequence x(n)={0,1,2,3,4,5,6,7} using Dif radix-2 FFT algorithm. (8)
B) Perform the circular convolution of the following two sequences using matrix method. X1(n)={2,1,2,1} , X2(n)={1,2,3,4} (4)

22. A) Design an idea Hilbert transformer having frequency response
H(ej?)=j for -p=?=0.
= - j for 0=?=p. Using rectangular window for N=11. (8)
B) Realize the following system function using minimum number of multipliers (4)
H(z)=1+1z-1+1z-2+1z-3+1z-4+z-5
3 4 4 3
23. Design a digital Butter-worth filter satisfying the constraints. 0.707=¦H(ej?)¦= for 0=?= p/2.
¦H(ej?)¦=0.2 for 3p/4=?= p.
With T=1 sec using bi-linear transformation.
24. A) The input to the system y(n)=0.999y(n-1)+x(n) is applied to an ADC. What is the power produced by the quantization noise at the output of the filter if the input is quantized to (i) 8 bits (ii) 16 bits. (8)
B) Compare fixed point and floating point arithmetic. (4)
25. A) With a neat block diagram explain in detail the architecture of TMS320C50. (8)
B) Write short notes on pipelining. (4)
26. Design a high pass filter with Hamming window with a cut-off frequency of 1.2 radians/sec and N=9.
27. Consider the transfer function H(z)=H1(z) where H1(z)=1/(1-a1z-1) and H2(z)=1/(1-a2z-1). Assume a1=0.5 and a2=0.6 and find the output round off noise power.
28. A) Calculate the DFT of the sequence X(n) = {1,1,-2,-2}. (6)
B) Find the output y(n) of a filter whose impulse response is h(n)= {1,1,1} and input signal x(n)= {3,-1,0,1,3,2,0,1,2,1} using overlap save method.

Other Links in The blog:

ECE Principles Of Management Dec 2009

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 02:31:00 +0000

ANNA UNIVERSITY – COIMBATORE
B.E.\B.TECH.DEGREE-EXAMINATION-DECEMBER 2009
FIFTH SEMESTER-ELECTRONICS & COMMUNICATION ENGG.
PRINCIPLES OF MANAGEMENT

For more question paper of ECE CLICK HERE

PART A-(2*20=40)
1. What are the streams related to Neo-classical theory.
2. What is a system.
3. Who are all the major contributors to contingency approach of management.
4. What are the functions of management.
5. What are two views on strategy.
6. What are various types of plans based on time.
7. Define policy.
8. What is meant by good alternative.
9. What is meant by formal organization.
10. What are the benefits of staff authority.
11. What is meant by delegation of authority.
12. Define staffing.
13. Define leadership.
14. Define creativity.
15. What is meant by job enrichment.
16. What are the barriers of communication.
17. State few control techniques.
18. What are the types of managerial control.
19. Define productivity.
20. Define budget.

PART B-(5*12=60)

21. A) Explain the challenges that are faced by the management. (4)
B) Describe Henry Fayol’s principles of Management. (8)
22. A) Explain the various steps involved in planning. (8)
B) Explain the elements of most effective MBO systems.
23. A) Explain the common problems and difficulties faced in decision making process. (6)
B) Describe the four approaches of selection process. (6)
24. A) Describe the basis for departmentation. (8)
B) Explain the significance of selection process (4)
25. A) Explain the significance of staffing function. (6)
B) Describe various style of leadership. (6)
26. A) Explain the role of Non-Financial incentives in Motivation (8)
B) What are the advantages of job enrichment.
27. A) What are the characteristics features of controlling. Explain. (4)
B) Explain the process f communication.
28. A) Explain the essential elements of control system (4)
B) Describe the essential requirements for good control system. (8).

Other Links in The blog:

BM1255 Pathology and Microbiology April/May 2008

noreply@blogger.com (Varuna) — Tue, 16 Mar 2010 01:28:00 +0000

B.E/B.Tech DEGREE EXAMINATION,APRIL/MAY 2008
Fourth Semester
Biomedical Engineering
BM 1255-PATHOLOGY AND MICROBIOLOGY
(Regulation 2004)

For more question paper of Biomedical department CLICK HERE

PART A--(10*2=20 marks)

1.What are cell stress proteins?
2.What is agenesis?
3.What is colliquative necrosis?
4.What is granulomatous inflammation?
5.What is Burkith's lymphoma?
6.What is programmed aging?
7.What is Hageman factor?
8.What is linkage analysis?
9.What is pulmonary embolism?
10.What is the principle behind Gram's staining?

PART B--(5*16=80 martks)

11.(a)Discuss the mechanism of apoptosis.
Or
(b)Discuss the various factors that lead to necrosis.

12.(a)Discuss the structure and classification of bacteria.
Or
(b)(i)Discuss the classification of fungus.(10)
(ii)How is fungal disease identified?(6)

13.(a)Discuss the mechanisms and the factors that lead to the development of the tumour citing a suitable example.
Or
(b)Describe the mechanisms of Edema formation and mention the causative factors.

14.(a)How is HIV contracted and discuss the mechanisms of its pathogenesis?
Or
(b)Describe the various types of hypersensitivity reactions and the mechanism of its development.

15.(a)Write notes on:
(i)Hematological disorders.(8)
(ii)TEM(8)
Or
(b)Write notes on:
(i)Intra vascular coagulation.(8)
(ii)Storage disorders.(8)

Other Links in The blog:

ECE EC1008 High Speed Networks Nov/Dec 2009 paper

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 14:53:00 +0000

B.E/B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2009
Seventh Semester
(Regulation 2004)
Electronics and Communication Engineering
EC 1008 – HIGH SPEED NETWORKS
(Common to B.E (Part Time) Sixth Semester – ECE – Regulation 2005)

For more question paper of ECE CLICK HERE

PART A – (10 * 2 = 20 marks)

1.What does the term 'asynchronous' indicate ATM networks?
2.Mention the encoding techniques followed in Fast Ethernet.
3.Mention any four important parameters that are associated with a single server queue.
4.Write short notes on Committed Information Rate in Traffic Rate Management.
5.Write down the expression by which the RTT is computed in the original TCP implementation (i.e., without any refinements).
6.What is meant by silly window syndrome?
7.Define Quality of Service in a data network.
8.What is meant by Active Queue Management Scheme?
9.Is RTP an application layer protocol or transport layer protocol? Justify your answer.
10.What is meant by Forward Equivalence Class in MPLS networks?

PART B - ( 5 * 16 = 80 marks )

11. (a) (i) Explain the various cabling schemes and the encoding scheme followed in Gigabyte Ethernet. (8)
(ii) Discuss the relevance of CSMA/CD in Gigabyte Ethernet. (8)
OR
(b) (i) Explain the action that take place in the receiver upon receiving the HEC field in ATM networks. (8)
(ii) Explain how the GFC is used to provide the flow control at the UNI of ATM networks. (8)

12.(a) (i) An engineering firm provides each of its analyst with a personal computer, all of which are hooked up over a LAN to a database server. In addition, there is an expensive, standalone graphics workstation that is used for special purpose design tasks. During the course of a typical 8-hour day, 10 engineers will make the use of the workstation and spend an average of 30 minutes at a session. Manager is satisfied with this arrangement since the utilization factor of the work station is only 5 hours out of 8. The engineers complain that the wait time for using the work station is long, often an hour or more, and are asking for more workstations. Explain the queuing analysis that should be done by the engineers to convince the manager. (10)
(ii) Explain the choke packet congestion control mechanism. (6)
OR
(b) (i) Consider a LAN with 100 personal computers and a server that matintains a common database for a query application. The average time for the server to respond to a query is 0.6 seconds, and the standard deviation is estimated to equal the mean. At peak times, the query rate over the LAN reaches 20 queries per minute.
Answer the following questions.
(1) What is the average response time ignoring line overhead? (2)
(2) If a 1.5 second response time is considered the maximum acceptable, what percent growth in message load can occur before the maximum is reached? (3)
(3) If 20% more utilization is experienced, will response time increase by more or less than 20%? (3)
(ii) Discuss the issues of fairness. Quality of Service and reservation in traffic management. (8)

13. (a) (i) Explain the various congestion control mechanisms followed in ATM networks. (8)
(ii) Discuss the ABR and GFR service categories in ATM networks. (8)
OR
(b) (i) Explain the Additive Increase Multiplicative Decrease behavior of TCP congestion control algorithm. (8)
(ii) Explain the basic TCP flow control mechanism in detail. (8)

14. (a) (i) Discuss the motivation and design goals of Random Early Detection scheduling policy.
(ii) Explain the Random Early Detection algorithm in terms of the estimation of queue size and determining packet discard.
OR
(b) (i) Describe the functional modules that should be present in ingress and egress routers of Differentiated Services Networks. (8)
(ii) Describe the components of a core router of Differentiated Services Network. (8)

15. (a) (i) Explain the soft state based receiver initiated reservation in RSVP. (8)
(ii) Discuss the flow specifications and filter specifications in RSVP. (8)
OR
(b) (i) Discuss the labeling and label switched path of MPLS networks. (8)
(ii) Explain the stacking rules followed in the label switched path of MPLS networks.(8)

Other Links in The blog:

CS1402 Object Oriented Analysis and Design Nov/Dec 2009

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 14:39:00 +0000

B.E/B.Tech.DEGREE EXAMINATION, NOVEMBER/DECEMBER 2009
Seventh Semester
Computer Science and Engineering
CS1402-OBJECT ORIENTED ANALYSIS AND DESIGN
(Common to B.E (Part-Time) Sixth Semester Regulation 2005)
(Regulation 2004)

For more question paper of CSE CLICK HERE

PART A- (10 x 2 =20 marks)

1. Give the characteristics of object oriented system.
2. What is an object? Give an example.
3. Give a note on patterns and its necessity.
4. Mention the models in Object Modelling Techniques in Rambaugh
methodology and its role for describing the system.
5. List out the steps for finding the attributes of a class?
6. Give the hint to identify the attributes of a class?
7. Define axiom along with its types.
8. For the schema employee (emp-id, emp-name, street, city) give the class representation along with the attribute types.
9. Mention the purpose of view layer interface.
10. What are client/server computing? Give two applications which work on this basis?

PART B- (5 X 16 = 80 marks)

11. (a) Explain and develop the payroll system using the steps of Object
oriented approach. [ Marks 16 ]
Or
(b) Explain the following
(i) Object Modeling Technique [ Marks 8 ]
(ii) Compare Aggregation and Composition with a suitable example. [ Marks 8]

12. (a) Explain the relationships that are possible among the classes in the UML
representation with your example. [Marks 16 ]
Or
(b) What are the various diagrams that are used in analysis and design steps
Of Booch Methodology? Explain with your own example. [Marks 16 ]

13. (a) Explain the method of identifying the classes using the common class
approach with an example. [ Marks 16 ]
Or
(b) Consider the Hospital Management System application with the Following requirements
• System should handle the in-patient, out-patient information through receptionist.
• Doctors are allowed to view the patient history and give their prescription.
• There should be a information system to provide the required information.
Give the use case, class and object diagrams. [ Marks 4+8+4 ]

14.(a) With a suitable example explain how to design a class. Give all possible
representation in a class (name, attribute, visibility, methods, responsibilities)[Marks 16 ]
OR
(b) Design the access layer for the Students information management which includes personal, fees and mark details. [ Marks 16 ]

15.(a) (i) Explain the various testing strategies. [ Marks 12 ]
(ii) Give the use cases that can be used to generate the test cases for the Bank ATM application. [ Marks 4]
or
(b) (i) How will you measure the user satisfaction? Describe. [ Marks 6 ]
(ii) Perform the satisfaction test for any client/server application. [ Marks 10]

Other Links in The blog:

CS36 Analog and Digital communications Nov/Dec 2009

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 14:03:00 +0000

B.E/B.Tech EXAMINATIONS,NOVEMBER/DECEMBER 2009
THIRD SEMESTER
COMPUTER SCIENCE AND ENGINEERING
CS36-ANALOG AND DIGITAL COMMUNICATIONS
(REGULATIONS 2008)

For more question paper of CSE CLICK HERE

PART A-(10X2=20 marks)

1.A carrier wave is represented by equation s(t)=12sinwt.Draw the wave form of an AM wave for depth of modulation of 0.5.
2.Compare FM with AM
3.What is coherent detection?
4.Why is binary ASK called on-off keying?
5.What are the errors in DM?
6.Define companding
7. What are the two methods of error detection and correction?
8.What do you mean by signaling rate?
9.Define processing gain
10.What is CDMA?

PART B-(5X16=80 marks)

11.(a)(i)The output voltage of a transmitter is given by 500(1+0.4sin3140t)cos6.28X10^7t
This voltage is fed to a load of 600 ohms.Determine
1.Carrier frequency
2.Modulating frequency
3.Carrier power (9)
(ii)Explain i detail about super heterodyne receiver(7)
Or
(b)(i)Carrier frequency modulated with a sinusoidal signal of 2kHz resulting in a
maximum frequency deviation of 5kHz.Find
1.Modulating index
2.Bandwidth of modulated signal (4)
(ii)Explain the method of generating FM signal using indirect method(12)

12.(a)(i)Explain the coherent binary FSK system with a neat diagram of transmitter and receiver(12)
(ii)Enumerate the advantages and disadvantages of FSK over PSK system(4)
Or
(b)(i)Explain the generation and detection of coherent QPSK system in detail(12)
(ii)What is DPSK?Explain its bandwidth requirements.

13.(a)(i)Explain in detail about DPCM with suitable diagram(10)
(ii)1kHz signal is sampled by 8kHz sampling signal and the samples are encoded with 12
bit PCM system.Find
1.Required bandwidth for PCM system
2.Total number of bits in the digital output signal in 10 cycles(6)
Or
(b)(i)Write short notes on ISI(6)
(ii)What is eye pattern?Explain how is the performance of a base-band pulse transmission
system measured with this?(10)
14(a)(i)Write short notes on error correcting codes
(ii)Find the generator polynomial of (7,4) cyclic code and find the codeword for the message
1001(12)
Or
(b)Explain in detail about the serial interface with its control signals and timing information
(16)

15(a)(i)What are pseudo noise sequences?How are they generated?(6)
(ii)Explain direct sequence spread spectrum system in detail(10)
Or
(b)(i)Explain 2 types of FH spread spectrum systems with suitable diagrams(16)

Other Links in The blog:

GE2112 Fundamental of computing and programming Jan 2010 paper

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 13:57:00 +0000

B.E./B.TECH. DEGREE EXAMINATIONS, JANUARY 2010
REGULATIONS 2008
FIRST SEMESTER
COMMOM TO ALL BRANCHES
GE2112 FUNDAMENTAL OF COMPUTING AND PROGRAMMING

For more question papers of CSE department CLICK HERE

PART A-(10*2=20MARKS)

1.Distinguish between Analog and Digital computer.
2.Convert 0.4375 decimal to binary system.
3.Distinguish between compiler and interpreters.
4.What is web server?
5.What is an algorithm?
6.Give the importance of a graphic packages.
7.Write a code segment using while statement to print numbers from 10 down to 1.
8.Write a c program for the following expressions.
(a)a=5 <= 8 && 6!=5
(b)a = b++ + ++b where b = 50
9.How strings are represented in c language?
10.What are the advantages of unions over structures?

PART B-(5*16=80 MARKS)

11.(a)(i)What are the characteristic of a computer? Discuss
(ii)Briefly explain the various generations of computers.
(iii)Convert the decimal number 59.8125 into binary and octal.
(OR)
11(b)Explain the different components of a computer system with block diagram.

12.(a)(i)Describe the different types of software with examples.
(ii)List the different software development steps and explain.
(OR)
12.(b)(i)Explain the common types of internet access.
(ii)Write short notes on web browser.
(iii)Explain a typical structure URL.

13. (a)Draw and explain the various symbols of flowchart and also draw the flowchar to add an array
of N elements
(OR)
13.(b)(i)Explain the features of Power Point package.
(ii)List and explain the features supported by spreadsheet package.
(iii)Briefly write about Desktop Publishing Software.

14.(a)(i)What are the different operators available in C? Explain with examples.
(ii)Differentiate between signed and unsigned integer.
(OR)
14.(b)(i)Explain the following conditional statements.
1.nested if-else statement
2.switch-case statement
(ii)Write a C program that reads a number and display whether the number is prime or not.

15.(a)(i)Write a C program to reverse a given string.
(ii)Differentiate pass by value and pass by address in c.
(OR)
15.(b)Write a C program that gets and display the report of n students with their personal
and academic details using structures.

Other Links in The blog:

PH 2111 Engineering Physics I Jan 2010

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 13:29:00 +0000

B.E./B.TECH. DEGREE EXAMINATION, JANUARY2010
FIRST SEMESTER
PH 2111-ENGINEERING PHYSICS-I
(REGULATIONS 2008)

For more question paper of ECE CLICK HERE

PART A-(10*2=20MARKS)

1.What is cavitation?
2.What is sonogram?
3.What are different methods of achieving population inversion?
4.Distinguish between homo junction and hetero-junction semiconductor lasers.
5.A signal of 100 mW is injected into fiber. The out coming signal from the other end is 40 mW.
Find the loss in dB?
6.What is meant by splicing in fiber optics?
7.Calculate the equivalent wavelength of electrons moving with velocity of 3*10^7 m/s.
8.What is Compton effect?Write an expression for the Compton wavelength.
9.For a cubic crystal draw the planes with Miller indies(110) and(001).
10.What are Frenkly Schhottky imperfections?

PART-B--(5*16=80)MARKS

11.(a)(i)Explain how ultrasonic can be produced by using magnetostriction method.(12)
(ii)Write any four applications of ultrasonic waves (4)
(or)
(b)In ultrasonic NDT what are the three different scan displays in common use? Explain (10+6)

12.(a)For atomic transitions, derive Einstein relations and hence deduce the expression for the ratio of spontaneous emission rate to the stimulated emission rate.
(or)
(b)What is holography?Describe the construction and reconstruction methods of a hologram.(4+6+6)

13.(a)(i)How are fibers classified?Explain the classification in detail.(8)
(ii)Explain double crucible method of fiber manufacturing.(8)
(or)
(b)(i)Explain the construction and working of displacement and temperature
fiber optic sensors (5+5)
(ii)Explain the construction and working of fiber-optic medical endoscope.(6)

14.(a)(i)Write a note on black body radiation.
(ii)Derive Planck's law radiation.
(or)
(b)(i)What is the principle of electron microscopy? Compare it wroth optical microscope. (4)
(ii)With schematic diagram explain the construction and working of scanning electron
microscope. (12)

15.(a)(i)Explain the terms:atomic radius, coordination number and packing factor.(6)
(ii)Show that the packing factor for Face Centered Cubic and Hexagonal Closed Packed stuctures are equal . (10)
(or)
(b)(i)What are Miller in dices?Explain. (4)
(ii)Derive an expression for the inter planar spacing for(hkl) planes of a cubic
structure.(10)
(iii)Calculate the inter planar for the spacing for(101) plane in a simple cubic crystal whose lattice constant is 0.42nm. (2)

Other Links in The blog:

IT 2202 Principles Of Communication 2009 paper.

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 13:22:00 +0000

Anna University 2009
B.Tech Information Technology
IT 2202-Principles Of Communication
Question Paper
Regulation 2008

For more question papers of Information technology (IT) department CLICK HERE

PART-A

1. Define amplitude modulation.
2. What is modulation index?
3. Why is ASK called as ON-OFF keying ?
4. What is the difference between QASK and QPSK ?
5. Define sampling rate.
6. What is ISI ?
7. Define Pseudo noise sequence.
8. What are the different types of multiple access techniques ?
9. Define Kepler's three laws of planetary motion.
10. What are the losses encountered by optical fiber ?

PART-B

11. (a) (i)Write short notes on
(1) AM voltage distribution. (4)
(2) AM power distribution. (4)
(ii) An audio frequency signal 10sin2p*500t is used to amplitude modulate a carrier of 50 sin2p*10^5t.Calculate.
(1) Modulation index. (2)
(2)Side band frequencies. (2)
(3)BW required. (2)
(4)Total power delivered to the load of 600O. (2)
(OR)
(b) (i)Compare FM and AM.(12)
(ii) The phase deviation constant in a phase modulation system is K=0.01rad/v.Calculate the maximum phase deviation when the modulating signal of 10V is applied. (4)

12. (a) (i)Explain the principle of FSK transmitter and receiver (10)
(ii)Write short note on spectrum and bandwidth of FSK. (6)
(OR)
(b) (i)Compare the various types of digital modulation techniques. (8)
(ii)Explain the eye pattern in base band digital transmission with neat diagram. (8)

13. (a) (i)Explain the elements of PCM system with a neat block diagram. (12)
(ii)What is companding ? (4)
(OR)
(b) (i)Find the signal amplitude for minimum quantization error in a delta modulation system if step size is 1 volt having repetition period 1 ms.The information signal operates at 100Hz. (4)
(ii) Describe the operations of DPCM system with relevant diagram. (12)

14. (a) (i)Write short notes on Frequency hop spread spectrum. (10)
(ii)Explain the applications of spread spectrum techniques. (6)
(OR)
(b) (i)Give a detailed account of multiple access techniques. (10)
(ii)Compare TDMA and CDMA. (6)

15. (a) (i)Discuss briefly the basic satellite communication system . (8)
(ii)Write short notes on LEO and GEO orbits. (8)
(OR)
(b) Enumerate the elements of an optical fiber transmission link. (16)

Other Links in The blog:

MCA CA5152 Object oriented Programming unw/July 2009 paper

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 13:18:00 +0000

M.C.A DEGREE EXAMINATION, JUNE/JULY 2009
SECOND SEMESTER
CA5152 OBJECT ORIENTED PROGRAMMING
(REGULATION 2007)
Time: Three hours Maximum: 100 marks
Answer all questions.

For more question papers of MCA department CLICK HERE

PART A – [10 X 2 = 20 marks]

1.What do you mean by data abstraction?
2.Give the advantages of object oriented programming.
3.What are friend functions?
4.How does an Inline function differ from a preprocessor macro?
5.What are copy constructors?
6.What is pure virtual function?
7.Write the function template for swap.
8.What are lists in C++?
9.What is purpose of ‘this’ pointer?
10.List the functions used with isotream.

PART B – [5 X 16 = 80 marks]

11.Explain the features of object oriented programming with examples.
Or
12.Compare the features of different programming paradigms.

13.Explain the various file stream classes needed for file manipulation.
Or
14.Explain the concept of passing an object by reference and return an object by reference with suitable example.

15.(a) Explain constructor with default arguments. (8)
(b) Describe the use of copy constructors. (8)
Or
16.(a) Explain overloading of unary operators (post ++, pre ++) with example. (8)
(b) Explain multiple inheritance with example. (8)

17.(a) write a program to create a string class and include member functions to add two string objects and to display string object. (10)
(b) write a note on exceptions. (6)
Or
18.(a) What is a nested class? Explain with an example. (8)
(b) what is meant by Map? Explain with an example. (8)

19. Explain the role and different types of classes with an example.
Or
20.(a) Write a program to calculate the sub totals of products sales in 5 different zones. Each zone has 5 sales persons. Finally print total sales amounts along with subtotals of each zone. And also print the total sale of each sales person. Use static members. (10)
(b) Write a C ++ program to print the calendar of months Jan-May of a given year.

Other Links in The blog:

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 13:18:00 +0000

M.C.A DEGREE EXAMINATION, JUNE/JULY 2009
SECOND SEMESTER
CA5152 OBJECT ORIENTED PROGRAMMING
(REGULATION 2007)
Time: Three hours Maximum: 100 marks
Answer all questions.

For more question papers of MCA department CLICK HERE

MCA CA5155 operating System June/July 2009 paper

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 11:15:00 +0000

M.C.A DEGREE EXAMINATION, JUNE/JULY 2009
SECOND SEMESTER
CA5155 OPERATING SYSTEMS
(REGULATION 2007)
Time: Three hours Maximum: 100 marks
Answer all questions.

For more question papers of MCA department CLICK HERE

PART A – [10 X 2 = 20 marks]

1.What do you mean by graceful degradation in multiprocessor systems?
2.What is system call?
3.What are the various states of a process?
4.Why CPU scheduling is required?
5.List the three requirements that must be satisfied by critical-section problem.
6.Define deadlock.
7.What do you mean by swapping technique?
8.State the principle of locality.
9.What is the use of file control block?
10.What are the free space management techniques?

PART B – [5 X 16 = 80 marks]

11.(a) Discuss about the mainframe system. (8)
(b) Explain the components of an operating system. (8)
Or
12.(a) Explain about the distributed systems. (8)
(b) Discuss the Operating System Services. (8)

13. Consider the following set of processes, with the length of the CPU – burst time given in milliseconds. (16)
Process Burst time Priority
P1 10 3
P2 1 1
P3 2 3
P4 1 4
P5 6 2

The process are assumed to have arrived in order P1, P2, P3, P4, P5, all at time 0.
(a)Draw four Gantt charts illustrating the execution of these processes using FCFS, SJF, a non-preemptive priority (a smaller priority number implies a higher priority), and RR (quantum = 1) scheduling.
(b)What is the turnaround time of each process for each of the scheduling algorithm in part (a)?
(c)What is the waiting time of each process for each of the scheduling algorithm in part (a)?
Or
14. (a) Compare long term, short term and medium term process schedulers. (8)
(b) Describe briefly about the Interprocess Communcation. (8)

15. (a) Explain the readers-writers problem using semaphores. (8)
(b) Explain the banker’s algorithm for solving deadlock problem. (8)
Or
16. (a) Explain the scheme for detecting deadlock. (8)
(b) Discuss the various methods for deadlock recovery. (8)

17. (a) Explain the various contagious memory allocation strategies with suitable examples. (8)
(b) Discuss the concept of demand paging. (8)
Or
18. (a) Consider the page-reference string : 2 3 2 1 5 2 4 5 3 2 5 2. How many page faults occur for the following replacement algorithms, assuming three frames? (12)
(i) FIFO
(ii) LRU
(iii) Optimal
(b) Write a short note on segmentation. (4)

19. (a) Suppose that a disk drive has 5000 cylinders, numbered 0 to 4999. The drive is currently serving a request at cylinder 143 and the previous request was at cylinder 125. The queue of pending request is 86, 1470, 913, 1774, 948, 1509, 1022, 1750, 130. What is the total distance (in cylinders) to satisfy these requests using the following disk-scheduling algorithms? (8)
(i) SCAN
(ii) LOOK
(b) Discuss briefly the schemes for defining the logical structure of a directory. (8)
Or
20. (a) Explain the various methods of allocating disc space. (8)
(b) Describe the components of a Linux system. (8)

Other Links in The blog:

MCA CA5153 Design and Analysis of Algorithms Jun/Jul 2009

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 11:08:00 +0000

M.C.A DEGREE EXAMINATION, JUNE/JULY 2009
SECOND SEMESTER
CA5153 DESIGN AND ANALYSIS OF ALGORITHMS
(REGULATION 2007)
Time: Three hours Maximum: 100 marks
Answer all questions.

For more question papers of MCA department CLICK HERE

PART A – [10 X 2 = 20 marks]

1.What is amortized efficiency?
2.Write the names of the basic asymptotic efficiency classes with their growth functions.
3.Define the internal path length of an extended binary tree.
4.State the Triomino Puzzle problem.
5.What are the differences between dynamic programming and divide-and-conquer techniques?
6.Give two reasons why the memory function approach is unattractive for the problem of computing a binomial coefficient.
7.Write the differences between backtracking and branch-and-bound techniques.
8.Write the three reasons to terminate a search path at the current node in a state-space tree of a branch-and-bound algorithm.
9.What are the two types to show a decision problem is NP-Complete?
10.What is halting problem?

PART B – [5 X 16 = 80 marks]

11.(a) Briefly discuss the sequence of steps typically required in designing and analyzing an algorithm. (10)
(b) Design a recursive algorithm for computing 2n for any nonnegative integer n which is based on the formula 2n = 2n-1 + 2n-1. (6)
Or
11(ii).(a) Write a recursive algorithm for the Tower of Hanoi puzzle. Obtain the recurrence equation. (8)
(b) Solve the recurrence equation which is to be obtained the above by the method of backward substitution. (8)

12.(a) Write a Mergesort algorithm and explain with an example using divide-and-conquer technique. (8)
(b) Explain the working of binary search algorithm using divide-and-conquer with an example. (8)
Or
12(ii).(a) Write the Quicksort algorithm and illustrate the operation of the algorithm with an example. (8)
(b) Describe the Strassen’s Matrix Multiplication technique. (8)

13.(a) Write and explain the dynamic programming algorithm for computing a binomial coefficient. Obtain the time efficiency of the algorithm. (8)
(b) Explain the importance of optimal binary search tree. (8)
Or
13(ii).(a) Explain the Warshall’s algorithm for computing the transitive closure of a directed graph. (8)
(b) Design a dynamic programming algorithm and explain for finding an optimal order of multiplying n matrices. (8)

14.(a) State and explain the n-Queen problem using backtracking. (8)
(b) Apply the branch-and-bound technique in solving the Traveling Salesman Problem. (8)
Or
14(ii).(a) Illustrate the Branch-and-Bound approach of solving assignment problem. (8)
(b) Solve the following instance of the knapsack problem by the branch-and-bound algorithm, with W = 16. (8)
Item Weight Value
1 10 100
2 7 63
3 8 56
4 4 12

15.(a) Explain the procedure to solve the Traveling salesman Problem with approximation algorithms. (10)
(b) Give short notes on decision problems, undecidable problem, and NP-Complete problem. (6)
Or
15 (ii) (a) Explain how the knapsack problem is solved with approximation algorithm. (8)
(b) Apply the nearest algorithm to the instance defined by the distance matrix below. Start the algorithm at the first city, assuming that the cities are numbered from 1 to 5. (8)

Other Links in The blog:

MCA MC1703 Software Engineering Nov/Dec 2009 paper

noreply@blogger.com (Varuna) — Sun, 14 Mar 2010 11:03:00 +0000

M.C.A DEGREE EXAMINATIONS,NOVEMBER/DECEMBER2009.
THIRD SEMISTER
MC1703-SOFTWARE ENGINEERING
(REGULATIONS 2007)
Time: Three hours Maximum : 100 marks
Answer ALL questions

For more question papers of MCA department CLICK HERE

PART A-(10*2=20 marks)

1.List out the four fundamental process activities.
2.State the objectives of Throw-away prototyping.
3.What are deliverable?Give examples.
4.Use-cases are better than flow chart in understanding the user requirements-why?
5.Define the term Component.
6.What is Refinement?
7.State what Functional testing is not concerned with,and what is concerned with?
8.What is validation plan?
9.What is a software test plan?Discuss.
10.Relate defects and quality.

PART B-(5*16=80 marks)

11. (a) "The details of the project plan vary depending on the type of project and organization".List out and discuss the details that will be contained in almost all plans. (16)
or
(b) Perform a comparitive study between the Water Fall Model and Spiral Model. (16)

12.(a) Prepare a Software Requirements Specification document for a Library Management System.State the problem definition,Business Rules and any assumptions you make. (16)
or
(b) Develop a Use Case diagram for a Library Management Syetem.State the problem Definition,Business Rules and any assumptions you make.
(16)

13. (a) (i) With relevant examples discuss the following levels of cohesion:
(1) Coincidential cohesion
(2) Logical cohesion (8)
(ii)Explain the following levels of cohesion with relevent example.
(1)Temporal cohesion
(2)Procedural cohesion. (8)
or
(b) (i) With relevant example discuss the following levels of coupling:
(1)Content coupling
(2)Control coupling (8)
(ii)With a relevant example discuss the following levels of coupling:
(1)Stamp coupling
(2)Data coupling (8)

14. (a) Describe various White Box Testing Techniques.
or
(b) Discuss the following Testing Techniques:
(i) Integration Testing (8)
(ii) Alpha Testing (4)
(iii) Beta Testing. (4)

15. (a) (i) What is Software Configuration Management?Justify the need for Software Configuration Management. (8)
(ii)List and discuss the various Software Configuration items. (8)
or
(b) What is software quality assurance?List and discuss the various software quality assurance standards. (16)

Other Links in The blog: