All TV Service Menu Code

Baier TV4K 28MFV

2010-03-21T15:01:00.000+08:00

Baier TV4K 28MFVEnter Baier TV Factory mode button is hiden button located below STOP button, left cancel button, press Red button go to next menu and program up and down to select item and volume up and down to change value settings.Save and exit press P.P.

Aristona TV MD 1.2E

2010-03-19T14:59:00.000+08:00

Aristona TV MD 1.2EEnter to service default mode.Reset to default mode connect pin 42s and 43s together on small signal board #SSB#.Save and exit press power button on remote control go to stby mode.

Aristona TV GR2.4

2010-03-16T23:03:00.000+08:00

Aristona TV GR2.463TA71111Turn on your Aristona television, press menu and hold and press menu on tv panel. Press coloured button to select item , change settings press volume up to increase and down to decrease value settings.

DAEWOO TV.Alcuni models

2010-03-10T13:46:00.000+08:00

DAEWOO TV.Alcuni models When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute). Some models do not have the recall button, press it with the button display.

Mitochiba TV

2010-03-07T18:07:00.001+08:00

Mitochiba TVDecrese volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu. Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.

Microsonic TV

2010-03-06T18:03:00.001+08:00

Microsonic TVWith the TV off possition (stndby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment". Use program button up/down to select parameters and volume up/down to change the television value.To exit and save changes , shut down your Television. Recommendation: DO

Memorex TV

2010-03-05T18:01:00.002+08:00

Memorex TVMemorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.

Majestic

2010-03-04T21:12:00.001+08:00

Majestic Switch on Majestic TV, press remote control key button: SLEEP, MUTE, DISPLAY, MENU. With channel up and down select the parameters, with VOLUME up and down adjusts the value. To exit Majestic TV service mode press DISPLAY or SLEEP button.

KYOTO Service Mode

2010-03-03T21:04:00.000+08:00

Kyoto In the Kyoto remote control (RC-F70) press the following sequence: SLEEP, MUTE, DSP, MENU. Channel + / - to select , adjust value with volume + / -. To exit press POWER button .

KEN BROWN Service Menu

2010-03-02T20:54:00.000+08:00

Ken Brown. Press on the Ken Brown remote control the following sequence : SKIP, MUTE, BAND. With Channel + / - selected items. With Volume + / - adjusts the value. To exit and save changes press P (Picture) in the Ken Brown remote control.

JWIN Service mode

2010-03-01T20:40:00.001+08:00

JWIN Service modeEnter factory mode menu press PROD, with DISPLAY MUTE or you scroll through the pages, to enter SLEEP Sub-menu, select the position or channel Items, Volume + / - line value.

JVC TV service mode

2010-02-27T19:27:00.000+08:00

JVC Turn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT. Write down all settings before change all TV system value seting.

JVC Service Menu

2010-02-26T19:21:00.000+08:00

JVC Service MenuTurn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT. Write down all settings before change all TV system value seting.

TOSHIBA General Adjustments / factory mode.

2010-02-25T19:18:00.000+08:00

TOSHIBA General Adjustments / factory mode.Entering Toshiba TV factory modePress MUTE button on control remote, press mute button again to keep pressing.While pressing the mute button, press MENU button on Toshiba TV set.Displaying the adjustment menuPress menu button on TV, S dislpaying on top corner of the screen.TV (ANT)/VIDEO button (on TV) : A single horizontal line ON/OFFTV (ANT)/VIDEO

ITT Television.

2010-02-24T14:30:00.000+08:00

ITT Television.Turn on TV (stand by mode) press the following sequence of remote control: MUTE, three, Seven, Two, POWER. With the key 10 selects the item and Volume up / down to adjusts the value. To exit and save changes press ITT television POWER switch .

Service menu IRT

2010-02-23T14:29:00.000+08:00

IRT Television.Turn on IRT TV pres in the IRT remote control, MENU, QVIEW, MUTE. With PROGRAM up and down to select items, with VOLUME up and down to changes the value of the clock with the key changes sub. Menus

Service mode TOSHIBA

2010-02-22T14:28:00.000+08:00

Service Menu TOSHIBA Step enter sevice menuPress mute on Toshiba remote control and menu on Toshiba TV panel SimultaneouslyPress menu on Toshiba Remote, input these number ( Four, seven, two, five )Press Volume down on TV panel, press and hold key 9 on Toshiba Remote control.

Service Menu Toshiba

2010-02-21T14:27:00.000+08:00

Service Menu Toshiba Without menu on TV panelPress AV and F Simultaneously, enter this code One, zero, four, eight.Factory mode will loading for a second. Change value using volume key and select parameters using program key.

Toshiba television

2010-02-20T14:26:00.001+08:00

Service Menu Toshiba televisionAfter you get to the item that needs adjusting, Write down the original setting just in case you have to go back.switch On The THOSHIBA TV , press Volume down' button on the set.Press '9' button on the remote and hold, Use the 'Channel up or "Channel down' to select the item. Use Volume up and down adjust the value. Save settings and exit service mode switch Off the

Thomson service menu

2010-02-19T14:25:00.000+08:00

Service Menu ThomsonTX-90 CTV Service ModeSwitch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.

Thomson

2010-02-18T14:24:00.000+08:00

Service Menu ThomsonICC19 CTV Service MenuSwitch to Standby. Switch off with the mains switch. Press and hold 'Program down ' and 'Volume down' and then switch on with the mains switch. Exit: switch off the television with mains witch.

Service Menu Thomson

2010-02-17T14:24:00.000+08:00

Service Menu ThomsonICC19 ThomsonCTV Service MenuSwitch off Thomson TV to Standby mode. Switch off with the mainsSwitch of thomson TV. Press and hold blue button and then switch on with the mains switch thomson TV. Press bluebutton again. Exit: switch off with mains switch.

Changhong 21BM91

2010-02-16T14:21:00.000+08:00

Changhong 21BM91 chassis CN-18EAV2 service mode To enter the DESIGN/SERVICE mode Set the volume to no sound. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the factory mode. In this case, red “S”is displayed on the upper center of the screen. To exit from the S mode, turn off the Changhong TV set by the POWER button on the remote control.

Grundig

2010-02-15T11:21:00.002+08:00

Grundig televisionCUC1806 CTV Factory Default Values Resetting Buttons 'AUX', 'OK'.GrundigCUC1806 CTV Service Mode Menu guide: 'i', 'Dialog Center', 'Service', 'Onlyfor retailer', 'Code 8500'.GrundigCUC1821 CTV Child Lock Cancel Press Volume up, Volume down, Pprogram down, Pprogram up, OK.Factory mode will appear on the sreen.

Sony European models

2010-02-14T10:43:00.000+08:00

Service Menu Sony Some European models Press the following sequence on the remote control: IT, 5, volume +, TELETEXT OFF. See "TT" on the screen. Press MENU and the deployment different options (sub menus).Select press p +/- and volum +/- to change data value.