Tricks Collection Computer & Internet

Protect Your Computer From Adware & Spyware

2009-01-02T19:49:00.002+07:00

by: George Williams

Are you annoying of adware and spyware every time you open any websites? They have now reached epidemic proportions. They are every where in the cyber world. Here are four methods to remove or simply avoid adware and spyware without spending a dime on the latest "anti-virus" software.

1. Do not use Internet Explorer. Internet Explorer is like Swiss cheese. It is open to the world by default. Microsoft is continually releasing patches to fix all the flaws in the Internet Explorer 6.X and lower versions of the browser. Although it can be "secured" by increasing the security it may loose much of its functionality once set to maximum security with certain exploitable features off.

2. It is highly recommended you should use Firefox. If you don't use the Internet much, than perhaps you don't know much about Firefox. All you need to know is that it is a browser that works REALLY well and has great security features.

3. Use a software or hardware firewall (not just Window XP Service Pack 2's firewall). This may sound expensive and hard to do but it is not. If you have a DSL or broadband cable connection your Internet Service Provider (ISP) may have given you a DSL/Cable router with a firewall built in. All you have to do is turn it on. This may require you to take a few minutes to read the manual. If your ISP did not give you a DSL or Cable broadband router with a built in firewall you can spend anywhere from $20 - $60 (or sometimes even cheaper with a mail-in rebate) to get a router. If you have DSL you will need a DSL router. If you have Cable broadband ISP you will need a Cable Router. Brands such as Linksys have built in firewalls and a feature called NAT, Network Address Translation, which is very effective since it hides your real IP address from the Internet. All routers come with instruction on how to hook them up. If you want to keep you computer security free, just use a free software firewall.

4. Remove spyware/adware with free anti-spyware, anti-adware software. Other two excellent methods of cleaning your system for free are Lavasoft's Adaware and Spybot Search & Destroy.

It is better to use all of the above methods. Being proactive by surfing with a decent browser and getting a firewall is important, but it also helps to know about a couple of good anti-adware/spyware applications. There are many great forums on the Internet dedicated to doing nothing but finding and cleaning such malware. Chances are if your system is infected with it, hundreds of others before you have been infected and have already figured out how to get rid of the malware.

Read Also Best Information On Information Technology at InfoTech Review

Best SEO Tips to improve your website traffic

2008-12-24T19:06:00.002+07:00

In this day and age, the Internet has become the best and most quick way to earn. For a better earning, the basic point is a website that you must have in order to apply for different advertisement and affiliate programs. And for a website , you should have an average number of daily visitors. People do a lot of search through search engines. You will get a lot of traffic from search engines. So more your site has higher ranking in search engines, more visitor you can get.Search engines love fresh content sites and those which are free of errors. In order to optimize your website for better visibility in search engines, here are few SEO tips.

First and most important thing you should do after having a website, is to submit your website in most popular search engines, like Google, Yahoo, MSN, Altavista and Ask.com. Search engines take some time to index your website. Especially google take a little bit exrta time.
Put your site in Web Directories. Try to find those directories that have good PR( Pagerank from 0-10) like PR 3+ and if your site is indexed in that directory, your PR will increase. More PR you have, more top position in search engines you will have.
Buy some links on high PR websites if you can. This will boost your website’s Page rank.
Try to get lots of backlinks, this will also improve your site’s PR. Basically if you do a lot of posting on a forums and put a link to your website on your signature you should get some backlinks depending on how many posts you get.
Build a sitemap for your website and submit it to google sitemaps. You can search on google for sitemap tools and you will get a lot of free online tools, which can create xml sitemap of your website.
Exchange your website link to other website owners. They will have yours and you will have their. This will also give you some traffic.
Use a clean and nice theme for your website. People mostly don’t like dark colored themes, and also not the very light colored.
Keep your website up to date. So when a visitor come back to your website 2nd time, he should get something new and have a reason to come 3rd time. Search engines also love fresh content sites.
Get some advertisement banner space on different websites. Or you can try google adwords. Your website will be advertise worldwide and your will get visitors.
Find something interesting to put on your website, just to give some relax to your visitors. For example, you can put a game, google maps etc.
Keep in touch with your website. Remember sooner or later, your website can give you a lot of cash.
Be patient, Remember this is the most revered thing in web development.

I hope you can promot your website with the tips above. Remeber the last point i told you, every website need some time and effort to come on top on search engines. Once you have been promoted in popular search engines, you will get a lots of visitors and will have a lots of Page impressions of your adds.

Download Ebook Computer

2008-12-13T00:36:00.000+07:00

If you interested in computer, internet, and like reading, there are available thousands of ebook which related with Computer.
FlazX dowload here. Visit FlazX

and follow these steps;

Click Ebook that want to download
And Click Direct download
Choose any server, there are available three server, if you download 2 ebook in the same time so choose different server.
So the last page will be show "Download ebook" so enjoy downloading.
Finally enjoy Reading :-)

Suggested use IDM, n firefox expoler.

How to hack Windows XP Admin Passwords the easy way

2008-11-13T10:32:00.062+07:00

by Estyle, Jaoibh
and Azrael.
------------------------------------------------------------------------------
This hack will only work if the person that owns the machine has no intelligence. This is how it works:
When you or anyone installs Windows XP for the first time your asked to put in your username and up to five others.
Now, unknownst to a lot of other people this is the only place in Windows XP that you can password the default Administrator Diagnostic Account. This means that to by pass most administrators accounts on Windows XP all you have to do is boot to safe mode by pressing F8 during boot up and choosing it. Log into the Administrator Account and create your own or change the password on the current Account.
This only works if the user on setup specified a password for the Administrator Account.

This has worked for me on both Windows XP Home and Pro.
-----------------------------------------------------------------------------
Now this one seems to be machine dependant, it works randomly(don't know why)

If you log into a limited account on your target machine and open up a dos prompt then enter this set of commands Exactly:
(this appeared on www.astalavista.com a few days ago but i found that it wouldn't work on the welcome screen of a normal booted machine)
-----------------------------------------------------------------------------
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
-----------------------------------------------------------------------------
Now what you have just done is told the computer to backup the command program and the screen saver file, then edits the settings so when the machine boots thescreen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes "net user <admin account name here> password" If the Administrator Account is called Frank and you want the password blah enter this "net user Frank blah" and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks Any updates, Errors, Suggestions or just general comments mail them to either

How To Get Top Ranking, Search Engines

2008-11-13T10:32:00.060+07:00

The tutorial is all about getting your site listed on top in Search Engines i.e Search Engine Optimization

First thing you need to do is find the keywords you want to optimize for.

There is great tool by Overture (/http://inventory.overture.com/d/sea...ory/suggestion/)

But I would suggest using this free tool called GoodKeywords (/http://www.goodkeywords.com/products/gkw/)

This one does the same job as Overture does but it also supports other Search Engines (Lycos and Teoma etc..)

For example if you want to optimize for the keyword "tech news", just search for the keyword in any of the tools specified above... It would show you keywords related to that and not of the searches..

Pick the keywords which are related to your site.

For example when you search for "Tech News" you'll see the following results:

Count Search Term
11770 tech news
351 itt news tech
191 high tech news
60 news tech texas
49 computer tech news
42 bio news tech
34 in itt news tech
30 news tech virginia
29 asia news tech
25 hi tech news
25 sci tech news

Now see what other terms are related to your keyword technology news

Do couple of searches like that and note down around 15-20 keywords.
Then, keep the keywords which are searched most on the top.

Now you need Title Tag for the page.

Title tag should include top 3 keywords, like for "tech news" it can be like :

"Latest Tech News, Information Technology News and Other computer raleted news here."

Remember that characters should not be more than 95 and should not have more than 3 "," commas - some search engines might cosider more than 3 commas as spam

Now move on to Meta Tags

You need following Meta Tags in web page

<META http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<META name="keywords" content="keyword1,keyword2,keyword3">
<META name="description" content="brief description about the site">
<META name="robots" Content="Index,Follow">

No need to have other meta tags like abstract, re-visit and all, most people dont read it.

Now...

<META http-equiv="Content-Type" content="text/html; charset=iso-8859-1">

This tag is tells content type is html and character set used it iso-8859-1 there are other character sets also but this is the one mosty used..

<META name="keywords" content="keyword1,keyword2,keyword3">

This one should have all your keywords inside starting from keyword with most counts...

keyword tag for our example would be something like :

<META name="keywords" content="tech news,technology news, computer technology news,information technology,software news">

Remember to put around 15-20 keywords max not more than that. Dont repeat keywords or dont put keywords like, "tech news", "info tech news", "latest tech news" and so on...

<META name="description" content="brief description about the site">

Provide short decription about your site and include all the keywords mentioned in the title tag.

Decription tag should be:

<META name="description" content="One Stop for Latest Tech News, Information Technology News, Computer Related and Software news.">

It can be upto 255 characters and avoid using more than 3 "," commas

<META name="robots" Content="Index,Follow">

This is used for search robots..following explanation will help you :

index,follow = index the page as well as follow the links
noindex,follow = dont index the page but follow the links
index,nofollow = index the page but dont follow the links
noindex,nofollow = dont index page, dont follow the links
all = same as index,follow
none = same as noindex,nofollow

Now move on to body part of the page

Include all top 3 keywords here,
I would suggest to break the keyword and use it...

For example

YourSiteName.com one stop for all kind of Latest Tech News and Computer Related information and reviews.................

Include main keywords in <h#> tags <h1><h2> etc..
and start with <h1> and then move to <h2> <h3> etc..

<h1> tag will be too big but CSS can help you there, define small font size in css for H1,H2,... tags

When done with page copy, then you need to provide title and alt tags for images and links.

Use some keywords in the tags but dont add all the keywords and if not neccessary then dont use keywords in it, basically it should explain what is image all about.

Remember to add Top keyword atleast 4 times in the body and other 2 keywords thrice and twice respectively.

Now move on to Footer Part
Try to include top keywords here and see the effect, use site keywords as links i.e.

<a href="news.php">Tech News</a> <a href="software-news.php">Software News</a> etc..

Now finally, you need to read some more stuff..may be you can all it as bottom lines...

Site Map - This is page where you need to put all the links present in your site, this is will help Search Engines to find the links easily and also provide link for site map in footer, as search engines start scanning the page from bottom.

Robots.txt - This file contains address of directories which should not be scanned by search engines.. more info can be found here : /http://www.robotstxt.org/wc/exclusion.html search engines line google, yahoo ask for robots.txt file.

Valid HTML - Your code should have valid html and doc type, Its kind of diffucult to follow all the standards but you can atleast open and close all the tags properly, you can check your page's html online here : /http://validator.w3.org/ or you can use this free software called HTML Tidy : /http://tidy.sourceforge.net/

All done now, you just need to check your site with this script, its called SEO Doctor : /http://www.instantposition.com/seo_doctor.cfm

It'll show you the report of your site with solution.

Now, correct the errors and start submitting the site :

Start with google : /http://google.com/addurl.html
then yahoo : /http://submit.search.yahoo.com/free/request
then move to altavista,alltheweb and other search engies..

Also submit your site to direcories like /http://dmoz.org , /http://jayde.com etc...
Dmoz is must, as google, yahoo and may more search engines uses same directory

And remember, dont try to SPAM with keywords in these directories, dmoz is handled by Human Editors

Submitted the sites, but still i cant see you site on top?

Wait for sometime may be a month or so but keep an eye on your search term, use /http://GoogleAlert.com - this will show whenever google updates for your keywords, it will mail you the new results.

And also check whether your site is listed on google..
use this tool called Google Monitor, it can be downloaded for free from : /http://www.cleverstat.com/google-monitor.htm

Visit
http://trickthousand.blogspot.com

How to Get someones ISP password.

2008-11-13T10:32:00.059+07:00

1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :

mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".

note: No moeny will be returned if you don't follow our instructions!

thank you,
the support team!

4.) press enter twice and then write "."(without the "") and press ENTER!

--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .

[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?

[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".

[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".

[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"

"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..

* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".

* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)

* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!

How to get any password

2008-11-13T10:32:00.058+07:00

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How to fix Windows Installer problem

2008-11-13T10:32:00.057+07:00

Do you experience this kind of problem whenever you attemp to install an application in windows box (2k, xp)?

"The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."

The ms website knowledge article 324516 gives 2 methods as a way of fixing this problem, but you might be very lucky if any of the 2 fixes the problem, alot of guys end up formating their systems and doing fresh windows installations or try wired ways of fixing it.

Well, the solution is very easy:

1. right click your root windows installation drive i.e drive where you installed windows
2. click properties at the bottom
3. select security tab
4. click Add and scroll down to SYSTEM account click add and click OK.
5. allow Full control permission and click Apply and then Ok.

This should solve your problem with windows installer.

Visit
http://trickthousand.blogspot.com

How to find a remote IP

2008-11-13T10:32:00.056+07:00

Method 1

To view someone's IP# when they send you hotmail email do this:
1) Click "Options" on the upper right side of the page.
2) On the left side of the page, Click "Mail"
3) Click "Mail Display Settings"
4) Under "Message Headers" select "Full" or "Advanced"
5) Click ok

Method 2
reg a dydns account and install the ip pointer, so each time you ping the host name you regestored

for example:
you regestor the host name myhost.dydns.com, then you keep a little software running on the target host. The little software will keep update your IP to dydns.com server.

so at your pc just start cmd, and ping myhost.dydns.com, it will give you the most updated ip address.

Method 3
neverender, what doesn't work for you? Simply type in nc -vvv -l -p 80 on your box, which will set it to listen in verbose mode on port 80. Then give them a link to your IP address (for example: 111.111.111.11) and tell them to type it in their browser. The browser should resolve the address as well as append port 80 automatically. Just make sure that your friend is not very computer literate.

Method 4
Just download a very simple server such as this one and install it on your comp. Then run it and give your ip to the person you want and tell them to connect to it through a browser. Your server will log their connection and you will get their IP.

link:http://www.download.com/Abyss-Web-Server/3000-2165-10283992.html?tag=lst-0-6

Other Ways
-www.imchaos.com and make a "spy poll" to put in ur profile, this will tell u the IP of anybody who answers ur poll
-originalicons.com there is a page for doin it (i dont like it, but it works)
-or irc

Here is a more detailed tutorial about using NetCat.

http://www.onlamp.com/pub/a/onlamp/2003/05/29/netcat.html

Windows users can download NetCat from here:

http://www.atstake.com/research/tools/network_utilities/

How to edit right click menu

2008-11-13T10:32:00.055+07:00

How To Remove and Add Right-Click Menu Items from Files and Folders
Removing Items
A lot of programs you install will add themselves to the right-click menu of your files and/or folders. And most times, you have no choice in the matter and, as a result, your right-click menu can get very long with added items you don't even use. The last person I was helping with this had a right context menu so long that the Rename option was no longer visible!
Fortunately, you can easily remove those unwanted menu items, if you know the registry values to edit. And it's not at all difficult once you know the keys responsible for the additions.

For Files, the secret lies in the "context menu handlers" under the shellex subkey for "All Files" which, in the registry, is nothing but an asterisk - like a dos wildcard, which means the values entered apply to all files. It is at the very top of the Root key, right here:

HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers

Click the the + sign next to the ContextMenuHandlers key, to expand it.
Now you will see some of the programs that have added items to your right-click menu. Simply delete the program keys you don't want.
Yup! It's that simple. If deleting makes you uneasy, just export the key before deleting it. Or, instead of deleting the values, disable them. Simply double click the default value for the program on the right hand pane and rename the clsid value by placing a period or dash in front of it.
ie; - {b5eedee0-c06e-11cf-8c56-444553540000}
Then exit the registry, refresh, and right click a file to see if the item was removed from the menu.
Some programs - like WinZip or WinRar - will add several items to your right click menu but all of them will be removed by deleting or disabling their one context menu handler.

Note that the above key only applies to the right click menu of files.
To remove entries from the right click context menu of folders, you need to navigate to the Folder and Drive keys:

HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers
HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers

All you have to do is follow the same procedure as for Files - either disable or delete items you wish to remove.
Adding Items
Adding Items to the right click menu of Files and Folders is also fairly simple using the Registry. It just involves the creation of a few new keys for each item you wish to add. You edit the same keys used for removing items. Let's use Notepad as an example of an item you'd like to add to the right click menu of all your files or folders.

For folders, go to this key:
HKEY_CLASSES_ROOT\Folder
Click the + sign next to Folder and expand it so that the Shell key is visible. Right click the Shell key and choose New>Key and name the key Notepad or whatever else you'd prefer (whatever the key is named is what will appear in the right-click menu). Now right click the new key you made and create another key named Command. Then, in the right hand pane, double click "Default" and enter Notepad.exe as the value.
Exit the registry, refresh, and right click any folder. Notepad should now be on the context menu.

For files, go here again:

HKEY_CLASSES_ROOT\*
Expand the * key and see if a Shell key exists. If it does exist, follow the same procedure as for folders. If it does not exist, you'll have to create a new Shell first. Just right click the * key and choose New>Key and name it Shell. Then right click the Shell key and continue on the same way you did for adding items to the right click menu of folders.
Once done, Notepad should appear as an option in the right click menu of all your files.
Vic Ferri owns the very popular WinTips and Tricks <http://groups.yahoo.com/group/WinTips-Tricks> email group. He is also in charge of the Printing Tips <http://personal-computer-tutor.com/printing.htm> and Registry Tips <http://personal-computer-tutor.com/abc1/v4/vic4.htm> pages at Linda's Computer Stop.

How to Download-Upload Files from email

2008-11-13T10:32:00.054+07:00

This post will teach u how to send big files to email

This technic is really a newly powerfull way of downloading movies games... Nothing to worry about the fu***** deleters and all the jerks!

Enought bullshit lets get down to buisness:

First of all u need to have a big mail box. here are the one which we can cover. click on the icon to go to the website

• Gmail (Google mail)
• Storage space - 1GB
• Maximum attachment size - 10MB
Image
www.gmail.com

• Walla! mail (the best)
• Storage space - 1GB
• Maximum attachment size - 7MB
Image
www.walla.com

• Spymac Mail
• Storage space - 1GB
• Maximum attachment size - 10MB
Image
www.spymac.com

• Unitedemailsystems
• Storage space - 3GB
• Maximum attachment size - 10MB
Image
www.unitedemailsystems.com

• Xasamail
• Storage space - 2GB
• Maximum attachment size - 10MB
Image
www.xasamail.com

• Omnilect Mail
• Storage space - 2GB
• Maximum attachment size - 7MB
Image
www.omnilect.com

------------------------------------------------------------
Image

Then download the software called peer to mail:
http://dw.com.com/redir?pid=10351095&merid=72949&mfgid=72949&lop=link&edId=3&siteId=4&oId=3002-2196_4-10351095&ontId=2196&destUrl=http%3A%2F%2Fwww.peer2mail.com%2FP2MSetup.exe

official website:
http://www.peer2mail.com
--------------------------------------------------------------
Next step : configurate the soft

go in settings > SMTP server setting

and give an smtp adress that u know

Ex: smtp.laposte.net
user : HULK
pass: ******

Once configurated u don't need to touch it for the rest pf ur upload
Image

This is a critical step, if u are experimenting any pb of connexion this is were u need to have a look:

This is possible that temporaly ur internet provider dont allow u to use other smtp adress than his. So use it
ie:
smtp.free.fr
smtp.wanadoo.fr
(these are french one I don't know of which one u are using)
...

If u are experimenting any pb it is better to desactivate ur antivirus (the scanning mail option)

Image

----------------------------------------------------------

Image

1 - Click on Splint/Send File.
2 - Click on the icon (choose a file to send.....).
3 - select the archive that u want to upload it.
4 - type the address of ur account (email).
5 - It determines the size of the parts that the archive will be divided ( take a look at the max size used by ur mail) i advise u to put a size of 6MB.
6 - It determines the type of sending. "send via smtp server"

After all that, press OK.

===========

press the selected button in the figure:

Image

===========

After all the parts have been sent,go to ur account (email) and confirms, then u have to bring the Encrypted password follows the example below:

Image

===========

Always give the following information to the users:
follows the example below:

Email: GMail
Login: zezão
Password: |/kjds42d4sd24 \|

remmember:
- only Encrypted Password, never sends ur true password

--------------------------------------------------

Be careful : never post ur coordinates without having previously verifyed the content in the mailbox

sometimes peer2mail tells u that evrything is sent but It can happens that nothing is sent

---------------------------------------------------------------------------------------------------------

U want to download games and movies with a good speed ( thats what we all here for!)

So here is an easy way to download large files from mailbox

----------------------------------------------------
first download peer to mail

Image

official website:
http://www.peer2mail.com
----------------------------------------------------

Open it and go to the browse tab

---------------------------------------------------

then take the coordinates of the film/game u want to download

in this tutorial i'll use the film mulan :

mail: walla.com
login: dragon_mushu
pass: <(/++EiJPy)>

--------------------------------------------------
U noticed that the mail used is walla.com

so go to www.walla.com with the adress bar or with the prerecorded website (see picture)

Image

login with:
"dragon_mushu" & "<(/++EiJPy)>"

Image
----------------------------------------------------
go into the inbox then click on this icon:
Image

this wil do this:
Image

after uve retrieve all the segment click on "download"
------------------------------------------------------

If everithing is fine the movie will be merge automatically
and u won't need to care about the segments

------------------------------------------------------

If u look for a place to share/download movies/games using peer2mail just go to the peer2mail website www.peer2mail.com. Then go to the forum and click on "peer2mail related websites".

here is the direct link (may not work)
http://www.peer2mail.com/forums/viewforum.php?f=13

----------------------------------------------------------------------

Here u are now u should be an expert on peer2mail!!!

-----------------------------------------------------------------------------------------------------------------

Peer2Mail is the first software that let you store and share files on any web-mail account. If you have a web mail account with large storage space, you can use P2M to store files on it. Web-mail providers such as Gmail (Google Mail), Walla!, Yahoo and more, provide storage space that ranges from 100MB to 3GB.
P2M splits the file you want to share/store zips and encrypts it. P2M then sends the file segments one by one to your account. Once P2M uploaded all file segments, you can download them and use P2M to merge the segments back to the original file.

Sending a File

In order to send a file to an email account, Peer2Mail needs to split it into segments. Web-mail providers limit the size of an email attachment usually to a nominal 10Megs, but due to the size increase resulting from transport encodings, the limit works out to be a few MB less (Usually 7MB). Use the following dialog to prepare the file before sending:

* File Name - The file/s you want to send. You can use the Browse button to select a single or multiple files.

* Mail To - The recipients who will receive the file (Web-mail account). When using Direct Send you may enter only one email address. If you are sending Via MAPI then you can enter as many recipients as you like; Use the Recipients button to easily add email address separated by semi colon (icon_wink.gif.

* Optional Encryption Password - P2M automatically encrypts each segment to protect you privacy, however you can set a password (key) for the encryption to maximize the privacy. You will need this password when you merge the segments back.

* Segment Size - P2M splits the file into segments. Here you can determine the segment size, most of the web-mail providers limit the attachment size to a nominal 10Megs, but due to the size increase resulting from transport encodings, the limit works out to be a few MB less (Usually 7MB). It is recommended to test your web-mail provider for the size of an attachment it can receive.

Send Method -

o Direct Send - P2M has a built in SMTP component that sends the segments directly to the web-mail providers. You don't need to enter your ISP details in order to use P2M. If you are using this feature please make sure you enter a value in the 'From Email Address' because some web-mail providers reject email messages where there is no 'From' address. You can even enter a fake mail address.

o Send Via MAPI - P2M can send the segments using MAPI (Usually your outlook client). When you use this option P2M will split the files and move the sending responsibility to Outlook. Note that it will use your ISP SMTP server and details to send the files. You may enter as many recipients as you wish when using this option.

o Send Via SMTP Server - Send the segments using your ISP SMTP Server. If you are using this feature please make sure you enter a value in the 'From Email Address' because some web-mail providers reject email messages where there is no 'From' address. You can even enter a fake mail address. You may enter as many recipients as you wish when using this option.

* From Email Address - This is the source address of the mail. This address doesn't have to be valid, although sometimes web-mail providers reject emails where the domain part of the address isn't valid.

Image

Once you are done, click on the Ok button. You can now choose if you want P2M to send all the segments or only specific few by checking/un-checking the checkboxes. Once you are ready, click on the Send button. It may take a few hours to complete the operation depending on the file size and your internet connection.
Note: If you are using an antivirus program that scans outgoing mail, it is recommended to disable this feature since it takes a long time for each segment to be scanned.

Plain Transfer

In case you don't want Peer2Mail to split, zip and encrypt your files, and just want to send the files "as is�" then you can use Plain Transfer. This option isn't secure. P2M just sends the file as an email attachment and some web mail providers might even block it.

Choose Plain Transfer from the drop down button: Image.
Once you are done filling the details as described above, click on the Ok button. Once you are ready, click on the Send button.
Note: If you are using an antivirus program that scans outgoing mail, it is recommended to disable this feature since it takes a long time for each segment to be scanned.

Downloading the Segments

P2M includes a built in browser so you can easily log into your web-mail account. Before you can merge the segments you need to download them. It is important that you will save all the segments into the same folder. The first segment name ends with the P2M extension and the rest follow with a serial number 001...00x.

Auto Download

Peer2Mail can automatically list and download files from web-mail accounts. Currently P2M supports auto-download from Gmail, Walla, Yahoo, Spymac, Unitedemailsystems, Xasamail, Gawab, Hriders and Omnilect. To use this feature, login to your account and click on the green download button (Image). P2M will then list the segments (may take a few minutes) and at any time you can tell P2M what segment to download by clicking on the checkboxes that appear next to them. Click on the Download button to begin downloading the selected segments.
If you checked the Auto Merge checkbox then Peer2Mail will automatically merge the segments once the download process is done
Image

The listing process can be a bit slow since P2M scans the mail account and gathers information about each attachment. Sometimes a server doesn't reply to a request so P2M might skip it. To fix that, once the listing process is over, click on the refresh button and P2M will re-index only the segments it didn't already list.
P2M scans for segments only in the inbox for Yahoo, Walla, Spymac, Unitedemailsystems, Xasamailand, Gawab, Hriders, Omnilect, and on all folders with Gmail.

Merging the Segments

Once you completed downloading all the segments, use P2M to merge it back to the original file. Choose the folder you want the file to be saved in and click on the Merge button. The Merge dialog:

# P2M File/s - use the Browse button to select the first segment of the file you wish to merge. The first segment extension is P2M.

# Decryption Password - If you used a password when you sent the file to your account, you must enter it now in order to merge it back. Incorrect password will result in a failure to merge the segments.

How to copy songs from your iPod to your PC

2008-11-13T10:32:00.053+07:00

A reader points out a straightforward way for Windows users to transfer music from an iPod to your hard drive, without extra software:

1. Connect the iPod to your PC. If iTunes starts syncing (ie erasing) your music automatically, hit the X in the upper right hand corner of iTunes display, to the left of the search box, to stop it.
2. In Control Panel, Portable Media Devices, double-click your iPod.
3. Navigate to the Music folder.
4. Select all the music folders, and drag and drop them into a folder on your hard drive, or directly into iTunes.

And you’re done! The iPod music folder structure is strange and inexplicable, but once you move your files into iTunes you can set it to automatically organize your folder by artist and album to clean that up. (To do this, in iTunes Edit menu, choose Preferences and in the Advanced tab, check “Keep iTunes Music Folder organized.”)

If you give this a go, lemme know how it goes. I’ll ammend the instructions with any additional info for other versions of Windows and iPods.

Just for the record, I did not write this article, but I would have known how to do this. But one thing I ahve noticed is that you do not need to go into the control panel. Instead just make explorer.exe show hidden folders. Then, navigate into the iPod directory, go into iPod_control, and follow step four of the article. Software

How To Download Movies, From IRC

2008-11-13T10:32:00.052+07:00

First off welcome to the wonderful world of TMD!

--------------------- SETTING UP mIRC ---------------------

First of all you need to download mIRC from /http://www.mirc.com, this program will let you connect to the server and channel to download movies. Once installed run mIRC, and you will be presented with the mIRC options. The first thing you will see is the "Connect" options. Set the options as follows:

IRC Network: Select "Criten" from the dropdown list.
Full Name: Enter what you feel comfortable with.
Email Address: Enter your email address.
Nickname: Enter the nickname you want.
Alternative: If the nickname you picked isn't available this is the one it will use.

*If Criten isn't listed in the IRC Networks, hit the "Add" button.
Description: Criten
IRC Server: irc.Criten.net
Port(s): 6667
Group: Criten
Password: Leave Blank
Hit the "Add" Button to finish

Next we will move down to "DCC". Select "Auto-get file" (this will automaticly accept the files that are sent to you), click "YES" in the window that opens. Right next to the "Auto-get file" click on the "Minimize" option. Below that select select "Resume" from the drop-down list under "If file exists:". This option sets mIRC to automaticly resume any failed sends you may get instead of overwriting them.

Continuing in the "DCC" section, go down to "Folders". In the "DCC Ignore:" box select from the drop-down list "Disabled", then untick the "Turn ignore back on in:" box.

mIRC is now setup correctly to download movies from TMD! Hit "OK" on the bottom of the Options window and move on to the next part.

--------------- CONNECTING TO #TMD-MOVIEZ ---------------

In the upper left hand corner of mIRC you will see the "Connect" button in the tool bar, click it to connet to irc.Criten.net. Once it has connected (be patient it can take a while to finally connect on some days), a window will pop-up, this is the mIRC Channels list. On the right side of the window click the "Add" button. Another window will pop up, set it as follows:

Channel: Type in "#TMD-Moviez" (without the quotes)
Password: Leave blank.
Description: Just type in "TMD Moviez" or something of the sort.
Networks: Click the "Add" button and from the drop-down list select "Criten", then click "OK".

If you wish mIRC to automaticly connect to this channel once connected to the server, check the "Join channel on connect" box in the options. You may also wish to add the channel "#TMD" (Our chat channel) by repeating these steps.

Now click "OK" and it will show the mIRC Channels List again with the channel you just added. While the new channel is still selected click "Join" on the right side.

You can also type in /join #TMD-Moviez

A new window will appear with a bunch of text scrolling by, if you see this, than you did everything correctly! You are now in #TMD-Moviez! Move on to the next section for the fun part.

----------------- FINDING AND DOWNLOADING FILES -----------------

The things you see scrolling are ads and searches mainly. It is the ads that you may want to watch for. They consist of info about the server like this:

*********** Only an example server... Not a real one! ********

[2:29am] <TMD-Maveric> File Server Online Triggers:½/ctcp TMD-Maveric !Maveric's Moviez!╗ Min:½6.4 Kbs╗ Sends:½2/2╗ Queues:½10/10╗ Accessed:½3295 times╗ Online:½0/4╗ RCPS:½42.8 Kbs by kuki╗ Served:½95.6G in 785 files╗ Current BW:½41 Kbs╗ AQT:½1hr 15mins╗ Serving:½279 files╗ MOTD: -= :: (»`À.©©.->All the newest from distro!!<-.©©.À┤») :: =- ùI-n-v-i-s-i-o-nù

Really the only thing you need to know to get started is how to connect to the file server and get a file.
The trigger is what you type into the channel to connect to the server. The trigger above would be "/ctcp TMD-Maveric !Maveric's Moviez!" (without the quotes) as noted by the "Triggers:½ ╗" You always type what is inbetween the ½╗. You will know you are connected when a window pops up with:

Serving YourNickname
Waiting for acknowledgement...
DCC Chat connection established

Then you will see alot of text fly by which you can read if you want, but it is not needed. You will be left with something like this "[\]", that is the root directory of the server. To view the files in that directory you type "dir". At that point the directory contents will be show like this:

[2:40am] <TMD-Maveric> dir
[2:40am] <TMD-Maveric> [\*.*]
[2:40am] <TMD-Maveric> DVD RIPS
[2:40am] <TMD-Maveric> MOVIEZ
[2:41am] <TMD-Maveric> [tmd]csi.miami.s1.ep01.golden.parachute.(ftv).tvrip.(1of1).avi 121 mb
[2:41am] <TMD-Maveric> [tmd]csi.miami.s1.ep02.golden.losing.face.(ftv).tvrip.(1of1).avi 115 mb
[2:40am] <TMD-Maveric> End of list.

The ones in all caps are directories, and the others are files signified by the the name and size of the file. If you want to go to a directory you need to type "cd <directory name>". Then you need to type "dir" again to see the contents. You should see something like this:

[2:44am] <TMD-Maveric>cd moviez
[2:44am] <TMD-Maveric> [\moviez]
[2:44am] <TMD-Maveric> dir
[2:44am] <TMD-Maveric> [\moviez\*.*]
[2:44am] <TMD-Maveric> ..
[2:44am] <TMD-Maveric> A RUMOR OF ANGELS
[2:44am] <TMD-Maveric> ALI G INDAHOUSE
[2:44am] <TMD-Maveric> AVENGING ANGELO
[2:44am] <TMD-Maveric> BALLISTIC - ECKS VS SEVER
[2:44am] <TMD-Maveric> BARBERSHOP
[2:44am] <TMD-Maveric> BARBERSHOP (UNCUT)
[2:45am] <TMD-Maveric> [tmd]nailed.(evil).scr.(1of2).avi 169 mb
[2:45am] <TMD-Maveric> [tmd]nailed.(evil).scr.(2of2).avi 59.3 mb
[2:45am] <TMD-Maveric> End of list.

Now to get a file you need to type "get <filename>". At that point you will either be sent the file, placed in queue for the file, of told that there isn't a free spot in the queue for you. Looking like this:

[2:50am] <TMD-Maveric> get [tmd]nailed.(evil).scr.(1of2).avi
[2:50am] <TMD-Maveric> Sending [tmd]nailed.(evil).scr.(1of2).avi ½169MB╗.
OR [2:50am] <TMD-Maveric>The file has been queued in slot 1
OR [2:50am] <TMD-Maveric> Sorry but the Maximum Allowed Queues of 10 has been reached. Please try again later.

The window may say something like "idle connection closing in 30 seconds", when you are finished either type "exit" or let the connection close. You will still get your download!
TIP: To quicky enter the filename you should copy and paste it. mIRC automaticly copys what ever text is selected to the clipboard. So select the filename (when you let go of the mouse button the selection will disappear) then use Ctrl+V (or right click and choose paste) to paste it.

A few other things you should know is how to go back a directory ("cd .."), how to see what files are sending ("sends"), and how to see who is in the queue ("queues").

Now to find the movie you are looking for.... As you may have seen in the chat screen you can search for what file you are looking for. This is done by using "@find <moviename>". So if you were looking for "The Ring" then you would type "@find the ring". If any matching files were found new windows will open with the results. You will see these flashing red in the top bar. Clicking on them will display the results for each server the file was found in, looking a bit like this:

<Nickname-of-server> [@Find Results] -=SysReset 2.50=-
<Nickname-of-server> Found [2] files on Trigger [/ctcp Nickname-of-server !TRIGGER!] - Queues: [20/25]
<Nickname-of-server> File: [The Ring\[tmd]the.ring.(ftf).ts.(2of2).avi] - Size [149.7MB]
<Nickname-of-server> File: [The Ring\[tmd]the.ring.(ftf).ts.(1of2).avi] - Size [130.1MB]
<Nickname-of-server> End of @Find.

The things to pay attention to is the trigger and the "Queues". The "queues" tell you how many people are in line to get a file from this server. [20/25] means there are 20 people in line out of an available 25 slots. The fewer amout of people in the queue the shorter amount of time you have to wait before downloading. Once you find a good server, type in the trigger that is show and you will be connected to the file server.
TIP: To close all the windows that opened as a result of the @find type "/close -m" in the channel.

----------------- COMMON ERRORS AND PROBLEMS -----------------

Error: "You need to identify a registered nick to join..."
Solution: To register: type in (without quotes) "/msg NickServ REGISTER password youremailaddress". That will register your current nickname using the password and email specified. To identify type in (without quotes) "/msg NickServ IDENTIFY password" where password is the password you registered with.

Problem: "The video doesn't play right!"
Solution: Be sure to download and install the TMD Codec. If after you have intalled the codec the video still doesn't work, make sure you download the entire file, the file sizes are listed on our MoveBot.

Error: "No more connections allowed in your connection class"
Solution: This just means the server is full. There is nothing to do but wait till it connects. Patience is a virtue!

Problem: "I have been banned from the channel, what do I do?"
Solution: Most bans only last a minute, so try to join the channel later. If you still can not join, then private message the OP that banned you in #TMD. To send a private message type "/msg <username> <message>" in the channel substituting <username> with the username of the person that banned you, and <message> with the message you want to send.

Problem: "I downloaded a movie but the quality is bad!"
Solution: There is nothing you can do about it! TMD encodes movies that were supplied by a "ripping" group. We encoded those files to make them more compact for easy downloading, while keeping the best quality we can. Some movies we get are bad quality to begin with, and we do what we can with what we have to work with.

Problem: "How do I know what new movies have been released?"
Solution: We have a bot in #TMD-Moviez and #TMD, simply type "!newmoviez" into the channel for the last 10 releases. Type "!moviebot" for all of the bots commands.

-------------------------------------------------------------------------------------------

It all can be quite confusing at first glance, but after a week or two it seems simple! Any other questions you may have can probably be answered by going to #TMD. I hope this helps everybody.

****Written By Maveric****

How to change the serial number used in Windows XP, Valid for XP Corporate

2008-11-13T10:32:00.051+07:00

Step 1

Open Start/Run... and type the command:
regedit and click "OK" (or press ENTER).

Go to HKey_Local_Machine\Software\Microsoft\WindowsNT\Current Version\WPAEvents,
on the right double click on "oobetimer" and change at least one digit of this value to deactivate windows.

Click "OK" and close the Registry Editor.

Step 2

Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

This will bring up the "Activate Windows" window.

Check the option for "Yes, I want to telephone a customer service representative to activate Windows" and click "Next"

Step 3

Then click "Change Product Key" (don't enter any information on that screen)

Step 4

Type in the new key and click "Update"

The activate Windows by phone window will reappear at this point, just close it by clicking the X in the upper right hand corner

Step 5

Reboot your system and Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

If you see "Windows is already activated" then everything is OK.

How to bypass web filters

2008-11-13T10:32:00.050+07:00

There are several occasions where you will be at a public te How to bypass web filters
rminal, and require access to a particular website that is blocked for some reason or another. How to bypass these restrictions is a very common question, and will be covered here.

Lets pretend for a moment that the Internet is made up of 26 websites, A-Z. The web filter blocks your browser from accessing sites X-Z, but not sites A-W. Simply make the browser think you’re going to A-
W. There are a variety of ways to do this:

Proxy Servers:
This is a list of http proxies. These sites may not be up forever, so you may need to search for “free http proxy” or “public proxy servers” or other similar terms.

Proxy server lists:
• http://www.aliveproxy.com
• http://www.multiproxy.org
• http://www.publicproxyservers.com/index.html
• http://www.tehbox.com/proxy
• http://www.proxz.com
• http://www.proxy4free.com/index.html
• http://free-proxies.com

Now that you have a list of proxies, you would open IE (internet explorer) and click on Tools > Internet Options > Connections > LAN Settings > Advanced. Enter the address and port of one of the servers from the list in the proper area (http) and make sure the “use a proxy server for your LAN” option is selected. Remember to replace the proxy and port at your terminal to the original when you're done.

*Note: Some proxies listed may not work, and this method may decrease your surfing speed. By trying various entries, you’ll find one that works, or works faster.

The infamous translation trick:
Go to a web page translation site and use their services to “translate a page to English” thus accessing the blocked page through their trusted site.

You’ll notice that several translation sites are blocked, but by using less popular ones, this method can still be effective. Here is a list of some translation services. Again, these sites may not be up forever, so you may need to search for them.

• http://babelfish.altavista.com
• http://world.altavista.com
• http://translation.langenberg.com
• http://freetranslation.com/web.thm

Url Scripting:

Url scripting is the easiest method. It works on a select few web filters and is based on the same principal as the translation trick. By typing and address like “www.yahoo.com@www.restricted_site.com the filter will not go into effect as it recognizes the trusted site (in this case yahoo.com)

Other tricks:
Simply open the command prompt and type:
Ping restricted.com ? restricted.com obviously being the restricted site
At this point you can take down the IP address (ex. 216.109.124.73) and enter it into the browser. If access to the command prompt is also restricted, see “How to bypass restrictions to get to the command prompt.” If this article has been taken from information leak, then know that it involves anything from opening the browser, selecting view > source, then saving it as X.bat and opening it to opening a folder or browser and typing in the location of cmd.exe depending on the OS. I will not go into further, as this a completely different topic.

Use https://restrictedsite.com as referring to it as a secured site may confuse the filter.

Note: These are ancient methods that many new filters defend against, but still may be applicable in your situation. If not, a little history never hurt anyone.

Web based Proxies:
Another one of the easier, yet effective methods include web based proxies. These are simple in the fact that you just enter the restricted address and surf! Some of these have some restrictions, like daily usage limits, etc but you can also use another proxy (perhaps one that sucks, like a text only) to bypass their restrictions as well. Here is a list of some:

• http://proxify.com]http://proxify.com
• http://www.anonymizer.com/index.cgi]http://www.anonymizer.com/index.cgi
• http://www.guardster.com/]http://www.guardster.com/
• http://anonymouse.ws/anonwww.html]http://anonymouse.ws/anonwww.html
• http://www.the-cloak.com/login.html]http://www.the-cloak.com/login.html
• https://www.megaproxy.com/freesurf]https://www.megaproxy.com/freesurf
• http://www.anonymizer.ru]http://www.anonymizer.ru
• https://nadaily.com/cgi-bin/nph-proxyb.cgi]https://nadaily.com/cgi-bin/nph-proxyb.cgi
• http://www.userbeam.de/cgi-bin/nph-userbeam.cgi]http://www.userbeam.de/cgi-bin/nph-userbeam.cgi
• http://www.free2.surffreedom.com/nph-free.cgi]http://www.free2.surffreedom.com/nph-free.cgi

Proxy Programs:
There are many proxy programs that allow you to surf anonymously that are more or less based on the same topics we’ve covered here. I’ve added them just to cover the topic thoroughly:

• http://www.hotscripts.com/Detailed/28480.html]http://www.hotscripts.com/Detailed/28480.html
• http://www.inetprivacy.com/a4proxy/anonymous-grc.htm]http://www.inetprivacy.com/a4proxy/anonymous-grc.htm
• http://www.orangatango.com/home/index.ie.html]http://www.orangatango.com/home/index.ie.html
• http://www.steganos.com]http://www.steganos.com
• http://www.anonymization.net]http://www.anonymization.net ? toolbar that requires admin rights to install

Making your own CGI proxy server:

Making your own proxy server may come in handy, but I personally find that simply uploading a txt file/w a list of proxies to a free host makes for a much easier and headache free solution. If you don’t know PERL, there is code out there to help you set it up. Check out these sites for more info:

• http://httpbridge.sourceforge.net]http://httpbridge.sourceforge.net
• http://www.jmarshall.com/tools/cgiproxy]http://www.jmarshall.com/tools/cgiproxy
• http://www.manageability.org/blog/stuff/open-source-personal-proxy-servers-written-in-java/view]http://www.manageability.org/blog/stuff/op...en-in-java/view

Admin Access:
When all else fails, you can simply take over the PC and alter or delete the damn filter. This method varies according to the OS (operating system) you are dealing with. Please see “Hacking Windows NT” for more information. If this tutorial has been taken from information leak, then I will go as far as to say it involves booting the PC in another OS, copying the SAM file and cracking it using a program like saminside or LC5 rather than start a whole new topic within one.

How To Boot Xp Faster (updated)

2008-11-13T10:32:00.049+07:00

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there's an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there's no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process...with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type "del c:windowsprefetch tosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster.

Free Access To Websites Without Registering

2008-11-13T10:32:00.048+07:00

Go to

-http://bugmenot.com/

and type the URL of the website you want to log into.
Examples:

-http://www.nytimes.com/, -http://www.winnetmag.com/
etcetera.

Another (and better) way is changing the user agent of your browser to:
Googlebot/2.1+

-http://www.googlebot.com/bot.html

This is very easy in Mozilla's Firefox. Download and install the User Agent Switcher from

-http://www.chrispederick.com/work/firefox/useragentswitcher/
and add the Googlebot user agent.

Have fun, Dead Dreamer!

-]Edit[- Now this kicks ass, was just browsing entire forum without even needing to login to view restricted areas, and it works on other sites
And no, you cant access the hidden forums either, already tried that

Free World Dialup

2008-11-13T10:32:00.047+07:00

Free World Dialup - http://www.freeworlddialup.com/
"Use FWD to make real, free phone calls using your favorite telephone, computer or PDA and any broadband connection. Call your neighbor or a relative, next door or in another country; all with the same ease, speed, and high quality." Thanks to Jeff Pulver and his crew!

Quick summary:

1 - First, got to http://www.freeworlddialup.com and sign up to get your FWD # and password.
2 - Download http://brands.xten.net/x-litefwd/download/X-LiteFWD_Install.exe FWD/X-Lite ("self-configures") program or go to http://www.myphonebooth.com/ to call any FWD # and U.S. toll free #s using Internet Explorer (Firefox not supported).

Quickstart Guide: http://www.freeworlddialup.com/support/quick_start_guide
FWD Xlite Configuration Guide: http://www.freeworlddialup.com/support/configuration_guide/configure_your_fwd_certified_phone/fwd_xlite/all
MS Windows Messenger Configuration Guide: http://pulver.com/fwd/fwd30news.html#messenger (FWD supports Windows Messenger 4.6/4.7 but not MSN Messenger 5.x.)

3 - To call a U.S. landline/cell #, dial *+arecode+7digit#. (This FWD feature is not listed on their website, but has been working for several months now.)

4 - To call a FWD # from a PSTN (your regular phone), click
http://www.dslreports.com/r0/download/476274~3ccc4c9edbe2a596714a4fd9da897204/fwdaccessnumbers.zip or after you've signed up go to FWD web page, click on "Features", "Access #s" for a list of FWD access numbers in your area. Available in several states in the U.S., UK, NL and DE at this time.

Packet8:
-- To call a P8 phone # from a FWD phone: Dial **898 + 1 + P8 number to be routed to P8 service.
-- To call a FWD # from a P8 phone:
*If the FWD # you are calling contains 5 digits, start to dial with the prefix 0351. For example: 035112345
*If the FWD # you are calling contains 6 digits, start to dial with the prefix 0451.

Call UK:
Get a UK telephone # that will call you on your FWD #. Register http://fwd.calluk.com.

FWD Features: Some features like Voice email needs to be activated at http://www.fwdnet.net

Internet Calling
Call Waiting
CallerID
Missed Call notification
Call Forwarding
Call Transfer
Three Way Calling
Voice email
SoftPhone, IP Phones & *Web-based
Aliases
Whitepages directory
ENUM Entry
eDial SOAP
Conferencing
Instant Messaging
Web Calling/FWD-Talk
Corporate Cisco Call Manager Connection
Calling to Toll Free Numbers in the UK, US, NL, JP and FR TellMe Service (411).
-- NL Dial *31(800)... to reach Netherlands toll free #s.
-- UK Dial *44(800)... or *44(808)... or *44 (500) to reach UK toll free #s.
-- US Dial *1(8xx) xxx xxxx to reach United States toll free #s.
-- JP Dial *81 0120... to reach Japan toll free #s.

Frequently used numbers
613 Echo test
55555 Volunteer Welcome Line
514 FWD Coffee House
612 Time
411 TellMe Information
611 Part Time Technical support
511 FWD Conference Bridge

At the moment, I think this is way better than Skype, Yahoo IM voice chat, etc...I've been using FWD for over a year with my cable broadband service and didn't have to set up any port forwarding on my broadband router. Obviously you'ld need a mic/speakers connected to your PC.

You can also use your regular telephone via an adapter http://voipstore.pulver.com/product_info.php?products_id=32 and IP phone http://voipstore.pulver.com/product_info.php?products_id=33. Adapters and IP phones from different vendors like Cisco are available.

* Broadbandreports.com VoIP forum (formerly known as DSLReports.com)
-- If you have any questions or just curious about VoIP, visit the VoIP forum http://www.dslreports.com/forum/voip at DSLReports.com.

Visit
http://trickthousand.blogspot.com

FREE Hosting List php, mysql and more

2008-11-13T10:32:00.046+07:00

Free Hosting

Unlimited Bandwidth
Unlimited Webspace
Domain Hosting
PHP, FTP
Price: FREE!

there Free Web Hosting Package contains the following features:
Unlimited Data Transfer
Unlimited Disk Space
100mbps Network Connection
99.9% Uptime
Free Sub Directory ( hostultra.com/~you )
Cool yourname.vzz.net URL!
Free Subdomains ( Many domains to choose from! )
Free Domain Hosting ( yourdomain.com )
Custom Domain DNS Control ( A/CNAME/MX Records )
Browser and FTP Uploading
PHP / MySQL*
Unlimited Domains / Unlimited Subdomains
Free Search Engine Submission

http://www.hostultra.com/signup.html

Mail, FTP, CGI, Perl, SSI, PHP, ASP (FrontPage), MySQL, CPanel, and many, many more. You really will be your own webmaster. Our thoughtful and patient staff will guide you. Forums for when you seek the help of your peers. Emergency contacts for when you need concentrated one-on-one help.

What's the catch? There isn't one. PortalWorlds.NET is advertising and sponsor supported. Your site will show ads (your choice as to placement, side towers, top banners, popups, and similar) and earn money to cover PortalWorlds.NET's server and administrative costs. You do agree to do nothing offensive nor illegal.

In addition to the many things mentioned, you will also receive a Script Center (crammed with ready to use Perl), 100M diskspace, 250M bandwidth, 1 MySQL database, unlimited POP3 mailboxes (including autoresponders and forwarders), 1 mail list, Oscommerce package, PHP-Nuke, Invision Board, full CPanel.

.www.portalworlds.net thank "agresssor" for this one

GreatNow
USA, English
Hosting category: REG,BUSINESS,GAME,OTHER
http://www.greatnow.com/

Space 100 MB
Upload FTP Browser
Editor Advanced Basic
Ads Banner/Popup
Webaddress Subdomain
Features Domainhosting Subdomain Counter Form Guestbook

Beige Tower
USA, English
Hosting category: REG,BUSINESS,GAME,OTHER
http://beigetower.org

Space 100 MB
Upload FTP
Editor Advanced Basic
Ads No ads
Webaddress domain
Features PHP POP Email Domainhosting Telnet mySQL SSI CGI-BIN Guestbook

Comet Stream
Canada, English
Hosting category: REG,BUSINESS,GAME,OTHER
http://www.cometstream.net

Space 50 MB
Upload FTP Browser FrontPage
Editor Advanced Basic
Ads No ads
Webaddress Subdomain, Domain
Features PHP POP Email Domainhosting Subdomain mySQL SSI CGI-BIN Shopping Cart Counter Form Guestbook

1ASPHost
USA, English
Hosting category: REG,BUSINESS,GAME
http://www.1asphost.com

Space 100 MB
Upload Browser
Editor Advanced
Ads Popup
Webaddress /you
Features ASP SSI

Alexus Media
USA, English
Hosting category: REG,BUSINESS,GAME,OTHER
http://www.alexusmedia.com

Space 999 MB
Upload Browser
Editor Advanced Basic
Ads Popup
Webaddress directory
Features RealVideo RealAudio ASP SSI Guestbook

Angel Towns
USA, English
Hosting category: REG,BUSINESS
http://www.angeltowns.com

Space 50 MB
Upload Browser
Editor Advanced Basic
Ads No ads
Webaddress /members/you
Features Guestbook

Brinkster
USA, English
Hosting category: REG,BUSINESS,GAME
http://www.brinkster.com

Space 30 MB
Upload Browser
Editor Advanced
Ads Bannerad
Webaddress /you
Features mySQL ASP

FreeWebz.com
USA, English
Hosting category: REG,BUSINESS
http://members.freewebz.com

Space 100 MB
Upload Browser
Editor Advanced Basic
Ads No ads
Webaddress /you
Features POP Email Domainhosting SSI Shopping Cart Counter Form Guestbook

Illusionfxnet
USA, English
Hosting category: REG,OTHER
http://www.illusionfxnet.com

Space 250 MB
Upload Browser Email
Editor Advanced Basic
Ads No ads
Webaddress Subdomain and Domain
Features PHP POP Email Domainhosting Subdomain Telnet mySQL SSI CGI-BIN Shopping Cart Counter Form Guestbook

Internations
USA, English
Hosting category: REG
http://www.internations.net

Space 100 MB
Upload Browser
Editor Advanced Basic
Ads Topbanner
Webaddress /area/you
Features Form Guestbook

Snake INC
USA, English
Hosting category: REG
http://snake-inc.com

Space 100 MB
Upload FTP Browser
Editor Advanced Basic
Ads Banner + text
Webaddress Subdomain
Features PHP POP Email Domainhosting Subdomain mySQL SSI Counter Form Guestbook

Sphosting.com
USA, English
Hosting category: REG
http://www.sphosting.com/

Space 35 MB
Upload Browser
Editor Advanced Basic
Ads Pop-under
Webaddress Subdomain
Features Subdomain SSI Form Guestbook

Totalfreehost
USA, English
Hosting category: REG
http://www.totalfreehost.com

Space 50 MB
Upload FTP Email
Editor
Ads No ads
Webaddress Domain
Features PHP Domainhosting mySQL CGI-BIN

USALL
USA, English
Hosting category: REG,BUSINESS,GAME
http://www.webhosting.usallportal.com/free_webhosting.htm

Space 3000 MB
Upload Browser
Editor Basic
Ads Banner
Webaddress /members/you
Features Form

Web1000
USA, English
Hosting category: REG
http://www.web1000.com

Space 50 MB
Upload FTP
Editor Advanced
Ads No ads
Webaddress Subdomain
Features PHP POP Email Domainhosting Subdomain SSI Counter Guestbook

webspace4free.biz
USA, English
Hosting category: REG,BUSINESS,GAME
http://www.webspace4free.biz/?lang=english

http://nexuswebs.net
*new website just launched seems quite successful*
Space 200 MB
Upload Browser
Editor
Ads No ads
Webaddress Subdomain
Features PHP Domainhosting Subdomain mySQL CGI-BIN
NO Banner Advertisements
35mb Disk Space
Free Webmail Account
Free Subdomain - (yourname.nexuswebs.net)
Online Website Builder
Multi-Platform Template Editor
Website Template Library
24/7 FTP Access
Online File Manager
Email Virus Protection
Spam Filters
Message Board
Guest Book
Site Counter

http://www.tripod.lycos.nl/myaccount/freehosting/
50 MB webspace
NO Filesize limit
NO monthly transfer limit
PHP4.1 / MySQL (phpmyadmin) / counter / guesbook / personalised cgi feedback froms / customisable 404 error pages / FTP access

http://www.freeweb-hosting.com/
Q.Which files are accepted?
A.Currently we support standard html and images files, which means .htm, .html, .pdf, .gif, .jpg ,.png , .js, .css, .swf, .mid, .jar and .class. The size of your individual files should be < 85kb. Files exceeding this size will get automatically deleted. Besides that, there's no limit on the number of files you can host in your account.

Provider: DK3
Service: 50 MB Webspace
URL: http://www.dk3.com
Max file size: 400KB (I agree this sucks)
Comments: The following things are supported, FTP, MySQL, PHP, Perl, SSI, WAP. Plus pre-made portal and forum are available free.
*Update*

Provider:Free Web Hosting
Service: 100 Megs of webspace
URL: http://www.freewebsitehosting.com/
Summary:100 Megs Of Webspace, Free Site Promotion,FTP Support,Free Stats and Site Tools,
Unlimited Bandwidth,Free Guestbook, Fast and Reliable Servers,and Front Page Extensions.

Provider: Free Webs
Service: 100 Megs of space
URL: http://members.freewebz.com/
Summary: 100 megs of space, No banners of popups,Web Page Editing and HTML editing,FreeWebs Builder,
Site stats, Chatrooms,Guestbook, Counters, Site promotion, Form builder/Mailer, Photoalbums and more.

Provider: USALLportal
Service: 3 gigs of space
URL:http://www.webhosting.usallportal.com/free_webhosting.htm
Summary: 3 gigs of space! What else is there to know.

Provider:3hosting
Service: Unlimited Space
URL:http://www.3hosting.info/
Summary: Free hosting for adult sites, FTP access, Unlimited size of sites, Unlimited traffic, Quick Internet connection, TGP compatibility,
Free hosting of your domain.

Provider: HostUltra
Service: Unlimited space
URL: http://www.hostultra.com/
Summary: Unlimited Data Transfer
Unlimited Disk Space, 100mbps Network Connection, 99.9% Uptime, Free Sub Directory,
Free Domain Hosting, Custom Domain DNS Control, Browser and FTP Uploading,PHP,
Hosting for Unlimited Domains w/ Unlimited Subdomains, Free Search Engine Submission,
and NO ADS ON PAGES!

Provider:Crosswinds
Service: Unlimited webspace
URL: http://www.crosswinds.net/
Summary: Unlimited WebSpace, Web Based Email, Popups, $1 Premium Referral Reward, and more.

Provider:1AspHost
Service:100 Mb space
URL: http://www.1asphost.com/
Summary:100 MB of Web Space, Unlimited Bandwidth, Instant Account Activation,
Online Control Panel, Online Zip/Unzip Capability, Active Server Pages Version 3.0,
MS Access Database Connectivity.

Provider:Eccentrix
Service: 50 Mb space
URL:http://eccentrix.com/
Summary: 50 MB Web Space, WWW Board, Guest Book, Form Mail, WYSIWYG Web Editor,
Excellent Support, and more.

Provider: Neopages
Service: 50 Mb space
URL:http://www.neopages.net/
Summary: 50 Mb space, Unlimited bandwidth, POP E-Mail, True FTP Accounts ,
Site Admin Control Panel,

Provider: Internations Global Web Services
Service: 100 Mb space
URL:http://www.internations.net/
Summary: 100 Mb space, 1 GB bandwith, Web Message board, Guestbook,
FormMail script and more.

Provider: I12
Service: 800 Mb space
URL:http://www.i12.com/
Summary: 800 Mb space, unlimited POP3 and alias email addresses,
definetly a site to check out!

Provider: Nerd Cities
Service: 100 Mb space
URL: http://www.nerdcities.com/
Summary:100 Megabytes Web Space, GuestBook+Counters, Full Technical Support,
Unlimited File Size Web Control Panel, No Bandwidth Limits And more!

Provider: DK3
Service: 50 MB Webspace
URL: http://www.dk3.com
Max file size: 400KB (I agree this sucks)
Comments: The following things are supported, FTP, MySQL, PHP, Perl, SSI, WAP. Plus pre-made portal and forum are available free.

http://www.freeweb-hosting.com/
-You have UNLIMITED disk space and bandwidth with your site!.
-You can only upload files with .html, .htm, .jpg, .gif, .css, .js, .png, .pdf
file name extensions.
-Size of every file could not large than 85K bytes.

http://www.zoomfast.com/
->How much space do I get?
-Unlimited
->How can I upload my files?
-We offer full FTP access. The best FTP client can be found here.
->Can I use PHP or CGI?
-No.
->Can I host movies?
-No.
->Can I have my pages in non-english language?
-No.
->What is the maximum number of files?
-Unlimited.
->What is the maximum file size?
-80KB

->http://www.yoogo.com/
site for sale

->http://www.worldzone.net
Worldzone Free - 50mb space, allowed file types (au, mid, midi, wav, gif, ico, jpg, jpeg, png, htm, html, shtml, wml, xml, css, class, jar, java, dat, txt, tmpl, htaccess, htpasswd, js, map, swf, ttf). Sorry but no cgi, ftp, MySQL on our Free accounts. 1 468x60 banner will be located on the bottom of your page but can be removed in our $12 yearly Plus Package.

->http://www.web1000.com/
50 mb space

->http://www.tripod.com
20 MB of disk space – Have room for your image files, MP3s, video clips.
1 GB of Monthly Bandwidth – More people can visit your site more often

-> http://www.simplycities.com
page don't load

->http://www.qwikpages.com
now it's freecoolpages.com
10MB OF DISK SPACE
UNLIMITED BANDWIDTH
FTP ACCESS FOR UPLOADING
FREE EMAIL

->http://www.netomia.com
60 mb of space!
Your website may not contain or refer to sites with the following content: Porn, warez, hack or anything encouraging any kind of illegal activities or racism.

->www.netcolony.com
25 megs of webspace
Easy homepage creator
Unlimited bandwidth
Your own messageboard
Templates
Free Guestbook
Advanced editor
No fees - 100% FREE!
Fast servers

Provider:POHost
Service: Unlimited Disk Space
URL: http://www.pohost.com/
Summary: Unlimited disk space, Unlimited transfers, Fast servers,Real FTP Uploads,
Domain name hosting TGP Compliant, and more.

Provider:Free Web Hosting
Service: Unlimited Disk space
URL:http://www.freeweb-hosting.com/
Summary:Unlimited disk space,Unlimited transfers, FAST Servers ,Domain Hosting,
24/7 Real FTP Access,Friendly Support, Web Email, FREE Web Promotion.

Provider: Zoom Fast
Service: Unlimited Space
URL:http://www.zoomfast.com/
Summary: Unlimited space,Unlimited bandwith, High speed servers and more

URL: http://www.yoogo.com
Summary: Offering a great 50 MB of space plus other features like Email Forms, Guestbooks and even Message Boards. Funny name I'm sure you will agree yet worth a look because of the nice amount of space!

Provider: Worldzone.net
Service: 100 MB Webspace
URL: http://www.worldzone.net
Summary: Offering a fantasic 100 MB why not give them a go! They do not accept Warze & Porn sites so dont try to host your page here if you plan to run such a page. However, because of the amount of space they are offering then would make for a great place to dump your files!

Provider: WebJump
Service: 25 MB Webspace
URL: http://www.webjump.com
Summary: WebJump is another Small Business Provider offer a huge 25 MB for your website and unlimited bandwidth! Unlike B-City.com WebJump support the use of FTP Updates along with the use of Flash, JavaScript, WAV Files and other things as well. If you like using Email please note WebJump at this time do not offer either POP or Web Based Email Services

Provider: Web1000
Service: 25 MB Webspace
URL: http://www.web1000.com
Summary: N/A

Provider: Tripod
Service: 50 MB Webspace
URL: http://www.tripod.com
Summary: N/A

Provider: Spree.com
Service: Unlimited Webspace
URL: http://www.spree.com
Summary: Offering counters, builders, uploaders, HTML guide and a unlimited MB account spree.com could be a great place for junk files. If your running a Warze related website, try these guys out and tell me what you think!

Provider: SimplyCities
Service: 30 MB Webspace
URL: http://www.simplycities.com
Summary: Simplycities.com have just had a change in servers hence speed should be and better be at an all time high. On the website they claim to offer Unlimited Bandwidth yet at the end of that they have a little * displaying the fact conditions apply yet we could not find on the page details of this!?! Anyway they could be worth a look if just starting out!

Provider: Server2000.at
Service: Unlimited Webspace
URL: http://www.server2000.at
Summary: Only problem with this is it's not english.

Provider: Qwik Pages
Service: 100 MB Webspace
URL: http://www.qwikpages.com
Summary: N/A

Provider: Netomia
Service: 60 MB Webspace, Online Editor, Counter, Form Mail, Guestbook
URL: http://www.netomia.com
Summary: One of the few providers offering such huge space limits with a string of other great features need for any good website!

Provider: JustFree.com
Service: 40 MB Webspace
URL: http://www.justfree.com
Summary: Offering 40 MB and no bandwidth limit this should be a good choice in web hosting. They also offer free forums, live support, free guestbook & soon Free Email! We have been unable to test this provider 100% hence comments are welcome!

Provider: InfoCache
Service: 50 MB Webspace
URL: http://www.infocache.com
Summary: InfoCache offers a fantastic 50 MB of webspace which is great for any small business or personal website. They are now begining to offer Free Email and also offer a range of "pay" service which are very cheap compared to some providers. Worth a look just for the space!

Provider: FreeHomePages
Service: 50 MB Webspace
URL: http://www.freehomepages.com
Summary: They claim fast and stable server with offers of chat, form mailer, guestbooks, page builders, unlimited bandwith & unlimited hits to get the visitors in and when they offer this much space why not go for them!

Provider: Dynahost.net
Service: 25 MB Webspace [ 100 MB After Approval ]
URL: http://www.dynahost.net
Summary: Providing a nice amount of space with the option of increasing to 100 MB unlike most providers. Dynahost accounts also come with forums & a guestbook which is all updated able via your Web Browser!

Provider: Dreamwater
Service: 50 MB Webspace
URL: http://www.dreamwater.com
Summary: Offer 50 MB, Guestbook, Chat, Form Mailer, Web Templates, Builder, Clip Art, Search Submissions, Subdomain & Short URL, Unlimited Band * no hit limit! Because they offer so much we think they could have a large number of member hence a slow service yet you should test them for yourself

Provider: Dencity
Service: 25 MB Webspace
URL: http://www.dencity.com
Summary: Dencity is a well known provider offering a great 25 MB which is fantastic for any small user. They also offer a range of tools for its members plus a listing of HTML Code to help you along!

Provider: Atmosphere.be
Service: Webspace [Unlimited?] & 5 MB Email
URL: http://www.atmosphere.be
Summary: No Information

Provider: AFreeHome.com
Service: 50 MB Webspace
URL: http://www.afreehome.com
Summary: AFreeHome.com make out (in a round-about way) they hate Geocities.com! With the huge space they offer and no bandwidth limit they could be one of the best providers to date! They also claim to pay you US$10 for people you get to Sign Up yet this seems a little funny we think. Anyway - try them and inform us of how good/bad they are.

Provider: Above World
Service: 25 MB Webspace [Possible 60 MB of space]
URL: http://www.aboveworld.com
Summary: Above World claim to offer a 100% Free Virtual Domain along with 25 MB of webspace plus chat board and guestbook! When checking the above details on the Above World Website they listed via text they offer 25 MB yet a visible banner said 60 MB. We can provide no further information.

Provider: 50megs
Service: 50 MB Webspace
URL: http://www.50megs.com
Summary: 50megs.com is only one of a few providers offering such huge amounts of webspace for free. It comes with other services like Web Polls, counters and much more.

Provider: 00server
Service: 20 MB Webspace [Short URL Provided]
URL: http://www.00server.com
Summary: 00server offers a wide range of domains to suite most styles of websites. Along with the short domain names you get a fantastic 20 MB for your website. Known for its fast service yet the banner is always a down side to any provider!

Provider: 1and1
Service: 500 MB web space
5,000 MB/month traffic ($.99 per GB for additional traffic)
site statistics, log files, ready-to-run CGI-library, own CGI programming (Perl, Python), FrontPage 2002 extensions
Advanced Password Protection
5 FTP accounts
PHP3 & PHP4 MySQL
Proxy SSL Secure Server
Cron Jobs
SSH Secure Shell Access
URL: http://order.1and1.com/
Periodical time limited offers

PunoSoft Mail:
http://www.punosoft.com:32000/mail
-You can check email via website, OR I can give you the details on how to configure Outlook or Outlook Express for mail retrieval/send.
PunoSoft Gallery:
http://www.punosoft.com/gallery
-Great for sharing photos or "Signatures".
-Sign Up and I'll send you details on how to upload your photos and how to access them.

PunoSoft Web Host:

http://www.punosoft.com/webhost

125MB Hosting Service - http://www.125mb.com

XAXAX FREE HOSTING - http://free.xaxax.com

FREE HOSTiNG @ HOSTARS - http://hostars.com

CyberFreeHost - http://www.cyberfreehost.com

ULTRA FREE HOST - http://www.ultrafreehost.com

20forfree.com :: Free Web Hosting - http://www.20forfree.com

HentaiRack.com :: FREE HEntai Web Hosting - http://www.hentairack.com

EZ SEX HOST Free Adult Hosting - http://www.ezsexhost.com

Download from a paypal site without paying a penny!

2008-11-13T10:32:00.045+07:00

Just a little basic html tip for those who are trying to download an application from sites which has an paypal order page & link to start you off.

Use a proxy when you try this to hide your ip as some sites will record your ip when you connect for security.

1) Rightclick your mouse (ctrl+click) viewsource and open the source of the site in an a texteditor
2) Search for the word "return"
3) Next to it you can find the url for the thank you page
4) Copy the url and paste it in your browser and you will see the download link

This works only if you can download instantly after payment, it will not work if the link needs to be emailed to you.

You can try it here to start with:
Code:
http://www.ramphelp.com/halfpipe.html

About half way down the page you will find:

<input type="hidden" name="return" value="http://www.ramphelp.com/65984523/thanks/68912hp654/26865thankyouhp08363215423.html ">

Copy the link into your browser and download.

Download Free Music legally,, legally

2008-11-13T10:32:00.044+07:00

Are you scared that the RIAA is about to track you down for illegally downloading songs.
Well, here is a method of obtaining many songs absolutely free that is virtually untrackable
by modern technology. This has to do with capturing streaming audio, which in many cases, believe it or not
are plain old mp3s just waiting for you to "download." I have found most of the current top-40 as well as many others you may like, so keep searching. The music is waiting for you to find it.

Step 1:
First of all, you need to find a good site that hosts streaming audio. My favorite that has brought me many songs to date is hxxp://www.windowsmedia.com . Some others are just as good, but this is the site that I will be referencing (plus, I know you guys love to steal from Microsoft).

Step 2:
Alright, go up to the left hand corner where there is an empty text box. This is the search box, just fill it with a songname or artist just like you would in kazaa and click search. This will bring up a page with links to many websites hosting a stream by that artist. The ones with music notes are just that...music, this is what you want. In many cases, this is all you need. Just right click on one of the links and click "save as" to save the song. This works if the file extension is .mp3 or .wma or .asf or well-other known formats. If this worked, you are finished, otherwise continue reading.

Step 3:
However, if you encounter a .asx file, there are a few more steps you will have to endure. First of all, do exactly like the above example and save the file locally. After the file is downloaded, check to see how large the file is. If it is a large file in the megabyte range, then you should be able to play it in your favorite music program. However, if it is less than 1 kilobyte, open it as a textfile. You will then see many script commands that communicate to windows media player. Don't worry about these, just look for some URLs which will most likely be pointing to a .asf file. It will have at least one if not more. Open the new found URL in your browser and save it like in step 2 and you should be good to go. (I use Mozilla, because Internet Explorer likes to open things rather than save them as I tell it)

NOTE: If any of the URLs are preceded with "mms://" instead of "http://" find another URL, because this technique will not work.

This technique is especially useful to avoid prosecution because streaming audio, and downloading it appear the same to a web server, therefore you are seen as just another "legal" listener, so "download" away my friend and don't blame me if this soon becomes illegal (if it isn't already).

Step 4:
If you are picky then search for a program that will convert these file types to mp3s. I assure you there are many sites out there.

If this technique does not work for some reason, there is another technique which is manually recording streaming audio, with an audio capture program. I use the one that came with my soundcard (Audigy 2ZS, great soundcard), but I would recommend it only as a last resort such as with "mms://" files. There is a degredation in quality compared to the other formats and it records every sound your PC makes while it is recording so don't chat on AIM while recording (lol I can hear random doors slamming now).

Change Text on XP Start Button

2008-11-13T10:32:00.043+07:00

Step 1 - Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource HackerTM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Microsoft Windows 95/98/ME, Windows NT, Windows 2000 and Windows XP operating systems.

get this from h**p://delphi.icm.edu.pl/ftp/tools/ResHack.zip

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe.

The category we are going to be using is "String Table". Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used Click Me!

You’ll notice that after the new text string has been entered the Compile Script button that was grayed out is now active. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the File Menu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. Save the newly named file to C:\Windows.

Step 2 – Modify the Registry

!!!make a backup of your registry before making changes!!!

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open field. Navigate to:

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane, double click the "Shell" entry to open the Edit String dialog box. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.[/b]

Visit
http://trickthousand.blogspot.com

Broken Internet Explorer, How to fix it

2008-11-13T10:32:00.042+07:00

So one of your friends, “not you of course”, has managed to nuke Internet Explorer and they are unsure how they did it. You’ve eliminated the possibility of viruses and adware, so this just leaves you and a broken IE. Before you begin to even consider running a repair install of the OS, let’s try to do a repair on IE instead.

THE REPAIR PROCESS

Start the Registry Editor by typing regedit from the Run box. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Active Setup \ Installed Components \ {89820200-ECBD-11cf-8B85-00AA005B4383} and then right-click the “IsInstalled value.” Click Modify. From there, you will change the value from 1 to 0. All right, go ahead and close the editor and reinstall IE from this location. /http://www.microsoft.com/windows/ie/default.mspx

IF SOMETHING GOES WRONG

If messing with the registry and something goes horribly wrong, you can use “Last Known Good Configuration (F8 Safe Mode)” or a Restore Point to get back to where you were before, with your settings. Then you can try again, this time taking care to watch the portion of the registry you are changing. Most people who have troubles with this end up changing the wrong registry key.

Hope this tut helps some members.

How To Change Thumbnail Size And Quality

2008-11-13T10:32:00.041+07:00

If any of you out there like to use the thumbnail view, especially for browsing through photos and images, it can become a bit of a drain on your system. It is possible to lower the thumbnail size and quality by editing the following registry keys.

Open the registry and navigate to :

HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer

Create a new DWORD value called ThumbnailSize, and set the value between 32 and 256.

And/or create another DWORD value called ThumbnailQuality, and set the value between 50 and 100.

Key Details :

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailSize
Data Type: REG_DWORD (DWORD Value)
Data Value: 32 - 256

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailQuality
Data Type: REG_DWORD (DWORD Value)
Data Value: 50 - 100

Visit
http://trickthousand.blogspot.com

HOW TO SET UP FTP SERVER

2008-11-13T10:32:00.040+07:00

This is a full tutorial for creating you're very own FTP.

The first thing to do is to go to
Code:
www.no-ip.com

Register free at the page. (follow all the instructions you get there)
Look at the top, and you see the Host Search. Write the name you want, and press Go! Then download the program called No-IP on the site, or use this:
Code:
http://download.com.com/3000-2165-10055182.html?legacy=cnet
Download and install the software, then write you're registerd username and password in the requested fields. A smiley face should now appear in the program box. Press the box next to it, and I will change to a happy face. Press it again, and you have you're ip guided to you're registerd host name. You have to press the smiley every time you log on to the internet. If you are connected all the time, you whont have to do it again, but try to make sure. It will tell you if you are guided to you're host name or not.

That was the basics. Now it's time for getting this thing online.

Got to
Code:
www.bpftpserver.com
(it's a pay prog. you can crack it or buy it)
Download Bullet Proof FTP Server, and install it. Start the program, and you will see a big white screen, and some icons on the top.
Press the lightning, and it will say: (example)

31.07.02 10:41:22 - FTP Server On-line : IP(s) 192.168.1.10,80.212.4.10, on port 21

Then you press the human head (nr. 6 from the right)
Make an account for you're self, and press ok. Minimize the program, and go to the internet again. Go to
Code:
www.smartftp.com
and download the prog (I'm sure the most of you have an FTP prog from before. Write the host name you made at NoIP, and the login pass and port. (Default is port 21.) Press connect, and you are online. I did not get into all details, but you can learn more about the progs in the help section.

Visit
http://trickthousand.blogspot.com