Scoping an ICT Project

Basic procedures on scoping for Wired Networking

2009-02-23T08:22:00.001-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client how many nodes.

* Suggest or recommend the right type of cable.

1. Cat 5
2. Cat 5e
3. Cat 6

Note: Assess the location if it should be indoor or outdoor and if it should be placed on what floor of the building.

* Estimate how far (in meters) would be the location of the nodes.

* Request for a blueprint of the building.

Note: Same procedures apply to IP PABx.

Basic procedures on scoping for IP PABx

2009-02-22T17:17:00.000-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client how many nodes.

* Suggest or recommend the right type of cable.

1. Cat 5e
2. Cat 6

Note: Assess the location if it should be indoor or outdoor and if it should be placed on what floor of the building.

* Estimate how far (in meters) would be the location of the nodes.

* Request for a blueprint of the building.

Cisco Unified IP Phones 7900 Series

Take full advantage of converged voice and data networks while retaining the convenience and user-friendliness you expect from a business phone. Cisco Unified IP Phones can help improve productivity by meeting the needs of users throughout your organization. Advanced media endpoints in this innovative suite of Cisco Unified IP Phones enhance the end-user experience.

The Cisco Unified IP Phones 7900 Series provides:
IP phones with color liquid crystal display (LCD), including dynamic soft keys for call features and functions
Support for information services, including Extensible Markup Language (XML) capabilities to extend IP phone systems
The capability to customize XML-based services to let users access a variety of information, such as stock quotes, employee directories, and web content
On-campus mobility using voice over wireless LAN with the Cisco Unified Wireless IP Phone 7921G and Cisco Unified Wireless IP Phone 7925G to extend advanced unified communications capabilities for mobile workers.

Basic procedures on Building to Building Networking through wireless

2009-02-22T07:54:00.000-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client how many nodes are there in each building.

Note: Wireless networking is limited to 40 nodes only. If in case there will be excess, you will require another access point.

* Estimate how far are the two buildings.

* Request for a blueprint of the building.

Linksys WAP200E 802.11b/g Wireless Access Point

Product MPN
MPN WAP200E
Key Features
Type
Wireless Access Point
WLAN Standards
IEEE 802.11g/b • IEEE 802.11i • IEEE 802.3 • IEEE 802.3u
802.11b Data Rates
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
802.11g Data Rates
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 28 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
Operating Frequency
2.4 GHz
Modulation
OFDM • CCK • QPSK • BPSK • DBPSK • DQPSK • 16QAM • 64QAM • DSSS
Security
WEP • WPA • TKIP • AES • 802.1x • Wireless MAC Address Filtering • WPA2
WEP Encryption Length
40 bit (=64 bit) • 128 bit

Cisco HGA9N High-Gain Omnidirectional Antenna for N-Type Connectors

Product Overview
Use the Cisco® HGA9N High-Gain Omnidirectional Antenna for N-Type Connectors (Figure 1) to increase the range of your wireless network. Attach the antenna to the exterior access point to increase both the effective strength of the outgoing signals and the receive sensitivity of the incoming signals.
The added signal strength and sensitivity also improve midrange communication reliability, because every packet comes through loud and clear, reducing retransmissions due to weak signal reception.
The 9-dBi signal strength allows the signals to travel farther and provides better signal detection in a 360-degree radius.
The weatherproof housing is able to withstand harsh outdoor conditions. The antenna also includes a lightning surge protector, mounting kit, and cable.

Details - Click Here!

Basic procedures on scoping for Wireless Networking

2009-02-22T07:53:00.002-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client how many nodes.

Note: Wireless networking is limited to 40 nodes only.
If in case there will be excess, you will require another access point.
You should determine the location of the access point (indoor or outdoor).

* Request for a blueprint of the building.

Procedures on scoping for IP Surveillance Camera Project

2009-02-22T07:52:00.001-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client on where is the desired location for the surveillance cam.

* Suggest or recommend the right type of surveillance cam to the client.

1. Dome Type
2. Directional Type
3. Pan Type

Note: Assess the location if it should be indoor or outdoor and if it should be placed on what floor of the building.

* Estimate how far (in meters) would be the location of the surveillance cam from the MDF.

* Request for a blueprint of the building.

Procedures on scoping for IP Surveillance Camera Project

2009-02-22T07:41:00.000-08:00

* Determine the Main Distribution Frame (MDF).

* Ask the client on where is the desired location for the surveillance cam.

* Suggest or recommend the right type of surveillance cam to the client.

1. Dome Type
2. Directional Type
3. Pan Type
Note: Assess the location if it should be indoor or outdoor and if it should be placed on what floor of the building.

* Estimate how far (in meters) would be the location of the surveillance cam from the MDF.

* Request for a blueprint of the building.