Quest Aerospace

Ed Rogala Joins The Quest Team

noreply@blogger.com (Unknown) — Thu, 28 Jan 2010 16:23:00 +0000

Hobby industry veteran Ed Rogala has joined Quest as its new Sales & Marketing Director. Rogala, widely known as "The Hobby Guy" has 37 years of industry experience. "We are so excited to have a person that is so highly regarded in the industry join our team. We have a very aggressive expansion plan in motion for 2010 and Ed is a major part of that plan" said company President, Bill Stine.

Quest Resources are returning!

noreply@blogger.com (Unknown) — Wed, 18 Nov 2009 17:25:00 +0000

When we changed our website in July 2009 there were several features that did not make the conversion. As time has gone along we have been updating the information to the new format.

If you check out the Quest Resources in the left-hand column you will see that the various features have returned. We are hoping to have all of these resources back by the end of the year.

If there is a resource that you need and it has not been placed on the website yet, please email us at: service@questaerospace.com and we will email you the item your are looking for.

In addition if there is a resource that you have not seen on our website and you would like for us to provide it, please email the same address and we will see if it can be done.

Current Quest Resources
Free Catalog
Sign up for SPECIALs!
Quest Blog
Product Instructions
DIY Projects
Model Rocket Museum
MSDS Information

MLAS - NASA Test Vehicle

noreply@blogger.com (Unknown) — Tue, 17 Nov 2009 23:13:00 +0000

Quest is happy to announce that the MLAS is available.

If you haven't checked out the details - do so!

It will make a great gift for the holidays~~~~~

Bill Stine receives recognition award for serving on HMA Board of Directors

noreply@blogger.com (Unknown) — Tue, 17 Nov 2009 15:18:00 +0000

Previously it was reported that Bill attended the iHobby Expo in Rosemont, Illinois.

While there he was awarded a plaque in recognition of serving a two year term on the Board of Directors of the Hobby Manufacturers Association (HMA).

He has been elected to serve a two year term on the Board of the General Hobby Division of the HMA and currently serves as a committee member of the HMA Safety Committee.

HMA is "The" trade association for hobby manufacturers. To learn more about HMA: http://www.hmahobby.org/about-hma.html

Congratulations on a job well done!

Google Checkout

noreply@blogger.com (Unknown) — Mon, 16 Nov 2009 19:28:00 +0000

You can now make purchases on the Quest Website using Google Checkout!

(in addition to the payment methods we have always accepted)

2009 iHobby Expo

noreply@blogger.com (Unknown) — Thu, 22 Oct 2009 21:10:00 +0000

Yesterday Bill Stine traveled from Pagosa Springs, CO to Rosemont, IL for the 2009 iHobby Expo. He was met there by Earl Schmidt of Cave Creek, AZ, a member of the Quest sales team. Together they will be introducing many new Quest products. You can see from the photo of Earl that the complete fleet of new products are on display.

The iHobby Expo started yesterday 10/21 and runs through Sunday, 10/25. If you are a Quest distributor or dealer stop by and let Bill & Earl share with you what Quest has to offer. If you are a consumer and are in the area you can attend the iHobby Expo on Saturday, 10/24, & Sunday, 10/25. When you visit the Quest Booth, which is #2107, let Bill & Earl know that Nettie sent you and we hope that you have a great time.

Quest - Paypal - New Products

noreply@blogger.com (Unknown) — Tue, 13 Oct 2009 22:14:00 +0000

Things have been busy at Quest. As many of you have noticed we have a new look on our website. The new website is easier to navigate. There are a few features that customers have been looking for that are missing. We are in the process of changing those pages to be more user friendly. Also some of the missing features are available in the "more info" of the product. An example: Starhawk value pack has the instructions, student worksheet & the flight diagram towards the end of the page.

If you can't find what you are looking for contact our customer service at

service@questaerospace.com or 1-800-858-7302

We are happy to announce that

Quest now accepts Paypal!

(in addition to the payment methods we have always accepted)

In addition to website changes and accepting PayPal we have five (5) new model rocket kits that we have added to the Quest fleet. You can check them out on our website at

http://www.questaerospace.com/

It is time to work on other projects ... as said before if you have any questions do not hesitate to contact us at

service@questaerospace.com or 1-800-858-7302

Rubber Band Powered Glider - Brings Back Memories!

noreply@blogger.com (Unknown) — Thu, 05 Feb 2009 18:54:00 +0000

Thank you Nettie!

My order arrived yesterday [Mon]. I was not expecting it for another week. Only 4 days, the Post Office must be getting better, and everything was intact. I've already began assembling the Micro Maxx and am awaiting a nice day to fly. I am used to flying very large rockets to extreme altitudes - this will be a real switch. Instead of loading the truck with all my gear and driving to the club site for the weekend, now I can get my "fix" right in the back yard.

I was pleasantly surprised with the little extra you threw in. It has already flown up and down the hallway a couple of times. I didn't know they made them anymore.

That little rubber band airplane brought back many memories of my childhood. When I was 6 my grandmother gave me one of those for my birthday, they cost a whopping 50 cents, back in 1958, I had been eyeing one in the 5 and Dime store [Woolworths] for months, begging for one every time I visited Grandma. She lived right behind the fire station. When I would come visit on weekends, I would go over to the station house and polish the brass on the old antique fire truck, for which the firemen would give me a nickel, and then let me slide down the pole as much as I wanted. In those days a nickel would buy a lot of penny candy. [several pieces for a penny!] But I was saving my nickels for that airplane! Turns out, one of the fireman walked over to her house one day and suggested that if she wanted to make a little boy happy on his birthday that would be the thing to get me.
It was the first present opened, after that, the others didn't matter. I was out the door playing with it in the firehouse yard. They had to forcibly come and get me to go back inside and open the rest of my presents. I could not tell you what any of the others were, but I shall always remember that little toy airplane. As they say in the old time movies “Thanks for the memories!”

Jim H. – Savannah, GA

OPROC Club Launch 1/17/2009

noreply@blogger.com (Unknown) — Tue, 20 Jan 2009 17:26:00 +0000

Nettie

I'm sending you a few photos of our OPROC club launch 1/17. What a great day no wind not that warm 46 degrees but all in all a great day none the less. About 40 rocket took to the air between 11:00 - 3:00 . BTW 95% of all launches were on Quests new igniters with no problems at all.

All the Best - John Ludwig
Olympic Peninsula Rocketry 4-H Club

Quest Will Share Your Story

noreply@blogger.com (Unknown) — Thu, 01 Jan 2009 17:53:00 +0000

Hi there!

Here at Quest we receive your stories and share them in the office. It has been decided that if Quest receives a story that we would like to share with others and you have given us permission to share we will post it here. We look forward to hearing from you!

Nettie

BIG '3' DAY SALE

noreply@blogger.com (Unknown) — Fri, 05 Dec 2008 05:10:00 +0000

Quest is happy to announce the
'Biggest Sale' of the 2008 year!

40% off everything -
- model rocket kits
- model rocket engines
- supplies

- equipment
- and other fun flying items

Visit us by clicking the sale poster
to the left and have fun shopping!

Remember it is for 3 days only
December 5 - 6 - 7

Happy Holidays from all of us
Quest Aerospace

BTW - All kit items (special combo packs) already have the 40% Discount Applied

Shipping of new Q2G2 igniters begins

noreply@blogger.com (Unknown) — Mon, 24 Nov 2008 20:11:00 +0000

We’ve begun shipping our new Q2 'Generation Two' (G2) igniters. These are absolutely the best igniter we’ve ever produced. The Q2G2 is made from a pair of twisted and insulated lead wires with a welded micro bridge wire. They are very durable and are very well suited for cluster ignition.

The tip is virtually indestructible. The long insulated lead wires really help prevent shorts caused by the wires touching each other and… the lead wires are actually long enough that they sit outside (not under) the engine exhaust, so your micro clips stay clean!

You’ll need to use caution when using Q2G2. They are specifically designed for use with the Quest 9V launch controller. Other brands of controllers may fire the igniter when the safety key is inserted. This is because the all-fire current on the Q2G2 is very low at an average of 150ma. This is close to the same current that flows through light bulb filaments. SO BE CAREFUL and always do a continuity check with your system first if it is not a Quest launch controller.

Why make the igniter so sensitive? Simple… by far, the largest users of Quest rockets and engines are youth groups like 4-H and Scouts. Keeping the current needed to fire the igniters lower increases the success rate for launching. We’ve been doing this for twenty years now and by far the largest customer service issue has always been ignition problems. Most of these are tied directly to the type and condition of battery used (people tend to not follow directions and don’t use fresh Alkaline batteries).

If your hobby store doesn’t stock the Q2G2’s yet, they are available on the Quest website

http://www.questaerospace.com/itemdesc.asp?ic=7024&eq=&Tp=

A peek into the Quest Research & Development Lab

noreply@blogger.com (Unknown) — Fri, 21 Nov 2008 21:01:00 +0000

A good deal of our time here at Quest is spent developing new products. Some of the ideas are submitted to us from rocketeers and professional designers, but most are developed by us. Sometimes a new product is nothing more than “packaging” old products in a new way like our new Prod. No 5750 STARHAWK 6 ROCKET PARTY SET. This is a product that is designed to make it easy for a retail store to sell rockets to a Mom or customer with no rocket knowledge at all.

Some R&D projects are very large in scope. Quest is currently designing an entire new line of mid-power model rockets and engines. These projects can take many months, even years! The Quest mid-power rockets will include several black powder rocket engines in the D, E, and F power range. Once the engine specifications and performance get finalized, then rest of the line starts unfurling – a new igniter – a new launch pad and controller- and finally kits. We gave a sneak preview of some of our kit ideas at NARAM in August 2008.

An R&D project can be for a specific vehicle. Here’s some work we’re doing on the new NASA ARIES launch vehicle.

Here’s some ideas we’re developing for new MICRO MAXX rocket kits.

And sometimes the most fun projects are what we call “Blue-Sky”. This is when we just have an idea and play with it.

SPEV is an acronym for “Spare Part Elimination Vehicle”.

Product development is definitely my favorite part of this business. If you have a great product idea, please feel free to contact us. We do follow a pretty strict protocol to protect your idea – so everyone must sign non-disclosure documents before we ever look at it.

By-the-way… Quest is also introducing Parts on our website soon. Look for that announcement and start designing your own cool looking rockets!

Bill Stine
NAR#24
President
Quest Aerospace, Inc.

Quest at NCASE 2008

noreply@blogger.com (Unknown) — Fri, 07 Nov 2008 17:53:00 +0000

This is the brawn side of the “A-team” from Quest. The A-team is what Bill called us when he asked if we could/would cover the NCASE show for him. (It couldn’t be that he just wanted to be in Chicago himself getting his latest award and needed somebody else to go to DC.) Anyway Suzy Sprague and her brawny husband (me, Jack) have been friends with Nettie, Scott and Bill for ‘a-long-time-now’ and are enthusiastic about the sport and hobby of model rocketry. Suzy speaks both rocketry and teacher, and is thus the perfect person to represent Quest at the National Convention of Air and Space Educators in our nation’s capitol. And me, I talk rockets with anybody that will listen, and I can set up the display booth and move boxes. We make a great Quest A-team.

Our Quest display booth

NCASE was held at the Crystal Gateway Marriott just across the Potomac from the national mall area of the District of Columbia. This year there were about 450 educators attending from across the country and another 120 or so representatives of the Civil Air Patrol. Even though Quest has been at this convention several times in the past, most of the comments we got started with some variation of ‘I did not know that Quest did model rockets.’ But we could eventually turn each conversation into ‘How can Quest help you teach aerospace?’ Some of the highlights of the show from our perspective make some of these points pretty well.

The CAP has a new rocketry and space study program. They offer three levels of study involving different types of rockets and increasing knowledge and skills of the cadet. The three CAP levels are named after three increasingly powerful American rocket boosters; Redstone, Titan and Saturn. Quest has support for both the water rockets and model rockets used in this new study guide. And at the Saturn Level, the Quest models of the Tomahawk, X-15 and Terrier-Orion satisfy both the flight, and scale elements for the cadet.

The Quest X - 15 Sally and her Dad, Scott

Speaking of the X-15, one of the most famous X-15 pilots was Scott Crossfield. His daughter was at NCASE and really liked our X-15 on display. Sally Crossfield Farley is running a scholarship foundation in her Dad’s name, and was very interested in anything that could bring students into aerospace; like flying a model of her father’s rocket-plane. Sally left before we could donate the display to her, so I still owe an X-15 kit to the Crossfield Foundation.

And two other Quest features that can help bring aerospace effectively to the classroom are our beginning level kits, and our educator bulk-packs. The entry kits quickly caught the attention of elementary educators. Either the ‘almost-ready-to-fly’ Starhawk with its one-piece plastic fin-can, or the new Astra with its novel ‘through-the-wall’ fin attachment tabs are frequently seen as superior fits for the first-time builder, and for first-time teachers too.

One other group that was at NCASE helping catch student’s attention and bring them into careers in aerospace was the Team America Rocket Challenge. This group, sponsored by the Aerospace Industries Association and by the National Association of Rocketry holds the worlds largest model rocket contest each year. The task varies each year but usually involves flying a raw egg to an exact altitude. This year’s challenge task could be handled by a modified Quest Courier egg-lifter. And our payload rockets can give beginners experience in flying the altimeter used by TARC. Several Texas High Schools use the Courier and the Zenith to introduce their TARC teams to the building and flying skills required for this contest. Trip Barber, the President of the NAR and one of the founders of the TARC contest liked our characterization of the Quest line as training wheels for TARC teams.

Suzy and I got packed up and back home safely, and are just now getting the contact names from the show back to Quest Headquarters. We are hoping that getting the Quest brand and products out in the open will better help our educators boost the interest and activity levels of hobby rocket around the country.

Fly ‘em Safe! --Jack

Quest Blog is back!

noreply@blogger.com (Unknown) — Wed, 05 Nov 2008 23:16:00 +0000

Boy has it been awhile! About a 18 months ago Quest packed up the office and headed from Cave Creek Arizona and headed for Pagosa Springs Colorado. There have been many changes in that time. One of the things that got neglected was the Quest Blog (qBlog). In fact it is was so neglected we can not access the old qBlog account. There are a good portion of items that were saved on our server and we hope that we will be able to restore them to this site or connect them through web-magic. Some of it is actually web-lost and attempts will be made to restore some of those items. That leaves us with now! Okay - we are starting a New Year resolution early - we will update the qBlog often - with everything we can think of. If you have any questions or suggestions please let us know. Happy Flying! Nettie