• Protection pets and other critters from drowning by allowing them to get out of the water on their own.

• Patented design

• Award-winning device

• Approved by the American Pet Association, receiving their “Seal of Approval” as a humane, safety device that makes life easier for pets and their owners.

• Easy to assemble, durable, robust and lightweight 

FACT:Can you believe that over 71% of us have pets? And most pet owners have more than one! FACT:Over 51% of all pet owners have a pool and/or spa…and that doesn’t include those with docks, boats or live on/near a canal.
FACT:Most people don’t realize that while the majority of animals can swim, they can’t necessarily get out by themselves! In reality, the odds of a pet drowning are 1 out of 1,028! How many non-pet owners do you know who enjoy coming outside in the morning and finding dead frogs or other “critters” floating in the water?  In fact, frogs are often found in the skimmer basket because they think it is a cave leading out of the water!
FACT:Pools are perilous to pets! Many pet owners try to protect their pet by training it to swim to the pool steps to get out of the water. This works fine in a daylight, non-threatening environment, but at night or if panicked, a dog will panic and forget it’s “landmark”… Animals can not see the steps for the very simple reason that they are under the water! That’s why when a pet or animal drowns it is a preventable accident! No one wants a drowned pet, that is considered a family member in most households, on their conscience….

PROBLEM:Water safety, particularly pool safety is important for pets just like children. Would you leave a child unattended by the pool? Of course not! Children are given swimming lessons at a very young age. Some even as infants. Certain pets need to be trained how to get out of the water! Even if a dog is a good swimmer it can be spooked and get panicked. Some solutions, like fencing in the pool, using a water alarm (such as Safety Turtle), or having a flotation vest on hand all are wonderful layers of protection. But there is still always the possibility that someone may not be around to hear the alarm and/or help the floundering animal get out of the water if they get (or are chased) in unexpectedly, or at night.

Don’t even risk these potential problems, instead, realize that there are several easy, viable and relatively inexpensive solutions!!

SOLUTION:Skamper-Ramp is white and when assembled and properly installed it angles down into the water, enabling your pet–and even critters! to see it leading out, day or night, 24/7. Skamper-Ramp provides peace-of-mind because your pet (or the critter you didn’t want to see there in the first place!)can ’scamper’ out of the water–pool or walled pond, even back on a dock or boat ALL BY ITSELF!

Dogs are the only animals that have to be trained to use the Skamper-Ramp! Cats, ferrets, rabbits, possums, frogs, snakes, even spiders all go to it instinctively.
Skamper-Ramp comes in two sizes: regular, for animals under 45 lbs and emergency and/or frequent  use, and the Super Skamper-Ramp, for larger pets and/or for any size pet if used with a dock or boat.
Skamper-Ramp is has been featured on the Today Show, Good Morning America, The Early Show and Animal Planet among many others….

For pricing or more information contact Pool Chemicals Online on 0870 163 2288

Yearly backwash

If you backwash [on average] every month, your pool filter requires approximately 8400 litres of water a year.700 litres x 12 months [once a month] = 8400 litres If you backwash [on average] every 2nd month, your pool filter requires approximately 4200 litres of water a year. 700 litres x 6 [once every two months] = 4200 litres

Cuts wasteful backwashing Based on the principals of centrifugal water filtration MultiCyclone collects 80% of the dirt that clogs your filter before it gets there.

MultiCyclone drastically reduces filter backwashing and filter cartridge maintenance.

Reduce backwash frequency

Reduce filter cartridge maintenance

If only 20% of the swimming pool dirt load reaches the filter, backwash frequency is reduced by 1/5th.

Instead of once every 1 – 2 months, the filter needs to be backwashed approximately twice a year.

Instead of every 6 months, the filter needs to be backwashed approximately once a year.

How it works?

Incoming water is guided by a diverter plate so that it enters multiple hydro cyclones tangentially, generating a strong centrifugal effect.

This spins the sediment out to the hydro cyclone’s wall and then spirals it down to the sediment sump, while the cleansed water spirals upwards.

The accumulation of sediment can be visibly monitored through the MultiCylcone’s clear sediment sump. The MultiCyclone is cleaned by simply opening its purge valve.

It only takes 15 litres of water to flush MultiCyclone, saving you time and money.

Easy to install

MultiCyclone is easy to install and fits to most existing pool filtration systems.

The MultiCyclone can be easily retrofitted between the pump and existing filter.

Minimal maintenance

There are no moving parts to wear out and replace, no filter media to clean or replace.

It is a simple way to save up to 7,000 litres of water every year.

Buy The Multi Cyclone From PCO or Call us on 0870 163 2288 for more info

EGFM is the environmentally friendly filter media and a viable alternative to silica sand; made from glass recycled in the UK, it doesn’t involve intrusive mining and the use of scarce resources. EGFM has the green credentials and with it’s superior performance is aslo cost effective against filter sand media.

EGFM The Benefits Over Silica Sand

Saving on backwashing and the resultant water, energy and chemical treatment costs

• It’s angular to sub-angular particle shape and bound silica content provides a 30% improvement in turbidity removal over silica sand
• It generally removes finer particles from water than the equivalent grade of silica sand
• It’s non porous composition means it’s less likely to clump or channel than silica sand
• With superior permeability, back washes take less time
• It’s less dense than sand, requiring 15% less media to fill the equivalent swimming pool filter
• EGFM doesn’t degrade therefore has a longer life span and may not need changing even when the filters are due for refurbishment

Buy Eco Glass Swimming Pool Filter Media today or call 0870 163 2288 / EGFM PDF

Catering for those wishing to create their own bespoke steam room or having limited space for a modular unit, a new ‘50G’ steam room door has been produced with a steam generator, shower fittings and touch pad controls all incorporated within the door column. Creating the ‘fourth wall’ this only requires the customer to have the remaining walls built to suit their design requirements, which also opens up the possibility of providing steam within a ‘wet room’ environment.

Available with either single or twin benches, the aptly named ‘Mono’ and ‘Duo’ steam cubicles incorporate a steam generator, overhead shower rose and a separate hand shower all contained within a single column. The floor space required for the unit is little more than that of an average shower cubicle.

The ‘Home Spa’ incorporates separate Sauna, Steam and Shower functions in one single cubicle, with an inner wall and door creating a division between the sauna and steam/shower areas. The sauna area can be configured with either two individual benches or a single stepped bench, whilst the steam area again can have single or twin individual benches.

Tylo Sauna / Steam Rooms / Showers

For a unit quote or to discuss a bespoke project please contact James-White Pools on 0118 930 5000

Bob White (Heatsaver Distribution) describes coming across Heatsavr as his ‘Eureka’ moment. The innovative liquid pool cover product has moved on now to be in it’s 6th energy saving year.
“Having been involved with energy conservation equipment for swimming pools embracing subjects as solar heating, heat pumps, environmental control, heat recovery etc., I was excited by the prospects with such a simple product as Heatsavr could offer. I knew from my understanding of energy requirements, particularly with regard to indoor pools, that if Heatsavr worked it had to be a winner. Heatsavr had been on the North American market for 11 years and no one had attempted to introduce it to the European market. Initially it was difficult to get Heatsavr taken seriously. Liquid cover - whatever next!! Can’t see or detect  it in water -sounds too good to be true!

Most have accepted that a conventional pool cover must work - but with a liquid cover the concept is more difficult to grasp and understandably most of the pioneering users needed to prove it’s worth.”

What is Heatsavr?

Heatsavr is a flexible cover that forms a transparent monomolecular surface layer whenever the water surface is not too disturbed. This layer reduces evaporation, which saves on water heating but, with indoor pools, can reduce the cost of air heating and humidity control.

“This is the best energy saving product that I have been involved with. It’s simple to use, has a low capital outlay and running costs that should provide a 400 to 600% return on investment!”

Heatsavr Liquid Cover

Features Include:

• Improved polyethylene distribution to give a stronger, more effective bubble
• Suncap bubble design offers a greater strength, higher heat transfer and more improved insulation
• Maximum durability against sun, salt and chlorine
• High level of UV inhibitors
• Pale, translucent top surface allows maximum ray penetration
• Available in 400 and 500 micron grades
• Warranty periods up to 5 years

Suncap Bubble Technology
A key feature of Suncap is the bubble shape and size. The reduced height but greater diameter of the larger than standard bubbles make Suncap material more effective as an insulator. The greater air space in the bubble lets less heat put of the pool which means that the water stays warmer longer.

The use of pale, translucent colours allows maximum penetration of short wavelength solar energy from the sun. This energy then radiates within the pool at longer wavelengths and the larger surface area of the Suncap bubbles trap these waves within the pool water, potentially increasing a pools temperature by up to 8 deg C.

The even distribution of material accross the Suncap bubble increases it’s strength and extends the covers life. The ‘Corners’ of traditional bubbles are potential weak points as material distribution can be thinner at these points - the points more susceptable to catching on copings etc. The bubble shape also provides superior buoyancy and excellent adhesion to the water during high winds and it’s low profile makes the cover more compact when on a roller.

For pricing please contact PCO on 0870 163 2288 or go to our contact us page on our site.

 Certikin Genie Gas Condensing Pool Boiler

Your pool is a long term investment that you and your family will enjoy for many years. This superb condensing gas heater is the perfect way to heat your pool, whilst being environmentally friendly and reducing running costs by up to 30%.

Efficiency
At the heart of every Genie lives a super quiet state of the art stainless steel heat engine. Using a fully modulated fan and gas valve, we guarantee a precise and clean burn every time with a perfect air/fuel mixture. Condensing technology allows the Genie to perform at up to 95% efficiency ensuring that the heat goes into your pool water, not into the air.

Installation
Practicality and flexibility are important features of any pool heater and the Genie offers both in abundance. Every heater is factory set to run on natural gas and the simple insertion of a special washer during installation converts to propane in minutes. All units can be installed either indoors or outdoors and a variety of flue options will cover almost any installation situation.

The plastic push fit horizontal and vertical flue systems will work on runs of up to 20 meters and are simple to fit. With pool water connections on either left to right or right to left and even being suitable for wall mounting, the Genie is the most flexible pool heater available.

User Friendly Options
Simple operation via the lockable temperature control dial and large clear display means the customer is in full control of the pool water temperature. The microprocessor control system constantly monitors pressure, flow, temperature and safety to ensure accurate pool temperature is maintained. The electronic diagnostics eliminate unnecessary service calls and can direct the technician to specific systems during servicing. The Genie even features a service required indicator to advise the pool owner when a service is due.

Reliability
Reliability is assured by the use of quality materials both inside and out. The heat engine produced in stainless steel is designed to last and the Genie casing is polyester coated to withstand the potentially harsh environments that it will be operating in. The electrical and mechanical components are all proven and sourced for such leaders as Honeywell. Customers can rest assured that the Genie Condensing Gas Pool Heater will provide years of trouble free, efficient heating. 

Our Toolbar will provide you with direct access to our key sections on the site, a search facility direct from the toolbar and up to date feeds on all the latest special offers and new products.

Pool Chemicals Online now ship worldwide so customers from all countries can benefit from quality products and excellent service. We can deliver all Swimming Pool and Hot Tub Parts, Components and Accessories, as well as items such as pool pumps, pool filters, winter debris covers and heat pumps.

Deliveries Outside of the UK

For orders that require international shipping please order on the website as normal. We will then contact you directly with an exact shipping fee to reach your required destination. Please note all amounts charged will be in GBP so local exchange rates will apply when paying on credit card. If you wish to get a quote before ordering then please contact us on 0870 163 2288.

NB. We cannot deliver to some countries due to lack of courier services.

We have carefully selected a range of pool enclosures that we feel represent the best value in the market. The IPC Pool Enclosures are an absolute first class product, by having factories in Eastern Europe and offices in the UK they have kept their overheads down and this is how they are able to offer such great value.

We offer Installation nation wide and will be happy to assist you in every stage of the process. Feel free to call for more information and to request a 16-page brochure.

Olympic Swimming Pool Enclosure

This is a new design of excellent appearance. It was displayed for the first time in the year of the Athens Olympics in 2004. It consists of 1 or 2 half domes (rounded parts) with the standard shape of enclosure in between or at one end. The main advantage is the ability to move freely within the whole space covered by the enclosure.

The sliding system makes the movement of standard segments easy in both directions. There are double movable parts opening from the middle in to the rounded parts. Opening/shutting is easy and does not require more than one or two persons (depending on the size of the construction) to operate (a motor is optional). Aluminum profiles can also come with a wood-like finish. This classic touch is particularly attractive with the bigger pool enclosures such as the Laguna, Tropea and Olympic models.

Imperia Swimming Pool Enclosure

A low enclosure which won’t detract visually from the landscaping around the pool. The internal height allows the pool to be used for swimming even when fully covered with the enclosure segments. This model has a fuller structure than the low Elegant line.

SIZE
width: 2.50 - 8.00 m
length: 4.20 - 16.00 m +
height: 0.60 - 1.80 m +-
number of segments: 3-7
larger size - individual design

TYPES OF ALUMINIUM PROFILES:
- type A profiles - 50×38 and 60×38 mm
- type B profiles 60×63 mm

STANDARD EQUIPMENT

- Extra door in end wall, sliding or opening type
- Double shifting, opening door in end wall
- Lateral door
- Lift-up face or other modification of end wall
- Lockable handle
- Sealing brushes on end wall, height 150mm
- Lift-up brushes on end wall
- Locking of end walls, doors and segments
- Extended ground rails