PaperPokés - Pokémon Papercrafts

BEAUTY & THE BEAST

2013-04-01T05:24:00.002-04:00

??? / BEAUTY AND THE BEAST - Disney Papercraft
Name: Belle and Adam
Type: FairyTale Romancers
Species: Human/Beast
Height: Varied
Weight: Average
Interesting Facts: In Disney's variant of the tale, the Beast originally appeared to be constantly angry, depressed, and spoiled. As opposed to his original counterpart, the creators gave him a more primal nature to his personality, which truly exploited his character as an untamed animal.
Belle is a very attractive 17-year old young woman. Although she is known throughout her village for her beauty, she is quite ignorant of her own appearance, but ironically greatly aware that her fellow citizens think of her as "odd" and "peculiar".

THE PAPER MODELS (Both)
Height: 40.0 cm/ 15.7 in
Width: 37.1 cm/ 14.6 in
Depth: 30.6 cm/ 12.0 in
No. of Pages: 10 (Belle), 15 (Beast)
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: These are both fairly tough models, and the templates are not numbered. An edge ID pdf is included to help those who can't use the pdo, but using the pdo is strongly advised. Considerable experience is advised as well.

For Belle, build from the hair down, attaching the arms as you go. Once you get past the waist, everything gets exponentially easier. Just be careful and take your time with everything above it. Close at the bottom of the skirt and attach the legs with a bit of glue and pressure.

For Adam, take a similar approach- start from the horns down, taking special care with the face and collar. Close at the end of the pant leg, and attach the legs with glue/pressure. Be sure to re-enforce the tail quite a bit, as it's the biggest weak point. It is also advised to put weight in the tail to help him stand, yet another reason to re-enforce the connection to the body/tail.

Download: A4

TIMON

2013-04-01T04:58:00.003-04:00

??? / TIMON- Disney Papercraft
Name: Timon
Type: Obnoxious
Species: Meerkat
Height: Short
Weight: Lithe
Interesting Facts: Timon Berkowitz can be rather selfish and thoughtless at times, but in the end, he has a good heart and is loyal to his friends. Unlike most meerkats, who work constantly, Timon is a lazy daydreamer which results in him being cast out of his colony. His status at the bottom of the food chain means he relies on stronger animals to protect him once he's on his own, and as such he usually looks out for himself, but nonetheless he never abandons his friends in times of trouble and is willing to risk himself for them.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 12.4 cm/ 4.9 in
Depth: 14.1 cm/ 5.6 in
No. of Pages: 4
Level: Medium-Hard
Designer: Brandon
Photo: Brandon
NOTES: Start at the head, working down and attaching arms/legs/tail as you go. The unnumbered parts just glue on the outside, so attach those whenever you see fit. Numbers on template.

Download: A4 / Letter

DRATINI V2

2013-03-29T13:04:00.000-04:00

147 / DRATINI v2- Pokémon Papercraft
Name: Dratini
Type: Dragon
Species: Dragon Pokémon
Height: 1.8 m (5'11")
Weight: 3.3 kg (7.3 lbs)
Interesting Facts: Dratini are timid, elusive, and extremely shy Pokémon, and thus are rarely seen, resulting in the belief that they are mythological among certain communities in Kanto.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 10.8 cm/ 4.3 in
Depth: 16.1 cm/ 6.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the tail. Be careful with the head wings, and attach them before continuing past the head. Further instructions on the template.

Download: A4 / Letter

GOLDUCK

2013-03-29T12:39:00.000-04:00

055 / GOLDUCK - Pokémon Papercraft
Name: Golduck
Type: Water
Species: Duck Pokémon
Height: 1.7 m (5'07")
Weight: 76.6 kg (168.9 lbs)
Interesting Facts: It has been noted that Golduck will often join swimmers when training. They are sometimes found rescuing people lost at sea from danger, their heads shimmering from the telekinetic powers that allow them do so. The headaches that ridiculed its Basic evolution form, Psyduck, don’t trouble Golduck, allowing them to have full use of their formidable mental powers.

THE PAPER MODEL
Height: 17.3 cm/ 6.8 in
Width: 20.3 cm/ 8.0 in
Depth: 21.8 cm/ 8.6 in
No. of Pages: 5
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the tail. Be careful with the head spikes and the hands and feet, the webbed details can be glued by a drop of glue on the sides or superglue. Further instructions on the template.

Download: A4 / Letter

DUNSPARCE

2013-03-26T02:40:00.000-04:00

206 / DUNSPARCE - Pokémon Papercraft
Name: Dunsparce
Type: Normal
Species: Land Snake Pokémon
Height: 1.5 m (4'11")
Weight: 14.0 kg (30.9 lbs)
Interesting Facts: At first glance, these Pokémon appear plain. However, Dunsparce make themselves quite elusive. They also are able to dig extremely well and fly a little using their small wings. Dunsparce are extremely shy of human beings and rarely ever make themselves known. However, they are known to swarm on random occasions.

THE PAPER MODEL
Height: 7.2 cm/ 2.8 in
Width: 16.7 cm/ 6.6 in
Depth: 21.0 cm/ 8.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the mouth and close at the tip of the tail. Glue the wings and spikes under the mouth as soon as the numbers indicate, so you can apply presure from the inside.

Download: A4 / Letter

ANORITH

2013-03-23T12:33:00.001-04:00

347 / ANORITH - Pokémon Papercraft
Name: Anorith
Type: Rock/Bug
Species: Old Shrimp Pokémon
Height: 0.7 m (2' 04")
Weight: 12.5 kg (27.6 lbs)
Interesting Facts: Anorith is an aquatic, arthropod-like, greenish-gray Pokémon that uses the eight flexible, white-and-red appendages on both sides of its body to propel itself through the water. Its large head has two large, beady eyes extending from the side, and in the middle of the head is a round black pattern with two red spots. Two large, segmented claws protrude from below its head, serving as either defense against predators or a weapon against prey. These claws seem to have become the Fossil that Anorith can be resurrected from. Anorith’s carapace is gray, and its tail is small with two gray spikes. Its mouth is on the underside of its body, and resembles a screw in shape.

THE PAPER MODEL
Height: 5.7 cm/ 2.2 in
Width: 17.2 cm/ 6.8 in
Depth: 16.0 cm/ 6.3 in
No. of Pages: 2
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: The model is built into two segments: head and body. Build the head starting at the front and closing at the back. Add the details before closing. Start the body from the back to the front, closing where it connects to the head. Glue each wing at one tab. Join the head and the body after they are closed and all the details are glued. Further instructions on the template.

Download: A4 / Letter

ESPEON v2: Mini

2013-03-06T15:02:00.001-05:00

196 / ESPEONv2 Mini - Pokémon Papercraft

Name: Espeon
Type: Psychic
Species: Sun Pokémon
Height: 0.9 m (2′11″)
Weight: 26.5 kg (58.4 lbs.)
Interesting Facts: Espeon are very loyal to their trainers and will protect them from harm. They enjoy basking in full sunlight. They are also able to read air currents allowing it to predict the future as well as its opponents' next moves. It evolves from Eevee via Happiness during the day, or when around a Sun Shard. As a shiny, its fur is a desirable bright-green.

THE PAPER MODEL
Height: 8.1 cm/ 3.2 in
Width: 9.7 cm/ 3.8 in
Depth: 6.9 cm/ 2.7 in
Pages: 1
Pieces: 34
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: The minee-veelutions have turned into a mini-series! Enjoy glaceon, whose biggest complaint is in the small, dainty paws.
Build as you would with umbreon and glaceon; build the legs first, attaching them as you build the body (starting at the head). Begin with ears, build around that from the face on down, and close at the hind end. add whiskers and tail, and done! (She may have some small standing issues. I adjusted it slightly since building, so hopefully that fixes it.)

Download: A4 / Letter

Espeon v1

BEEDRILL (Happy Valentine's!)

2013-02-14T03:27:00.003-05:00

015 / BEEDRILL - Pokémon Papercraft

Name: Beedrill
Type: Bug/Poison
Species: Poison Bee Pokémon
Height: 1.0 m (3′03″)
Weight: 29.5 kg (65.0 lbs.)
Interesting Facts: They have incredibly painful stings and move extremely fast. It is able to fire its stinger as a projectile and regenerate it. They chase after intruders relentlessly in a swarm. Prior to Pokémon Black and White, it was the only known Pokémon to learn Twineedle by level up.

THE PAPER MODEL
Height: 17.7 cm/ 7.0 in
Width: 24.2 cm/ 9.5 in
Depth: 15.4 cm/ 6.1 in
Pages: 6
Pieces: 49
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: You can build the head (regular numbers), arms (AR*/AL* for Right and Left arms), legs (L*/R* for Left and Right), Body (B*) and wings in any order and combine them all when each is complete. When building the arms, build the wiry blue parts first and plop them onto the end of the drill with a bit of glue. It's useful to use a small dab of glue inside the arms too, to reinforce it a little.
The legs are pretty straight forward, just connect the rings in that order. Close the head near the neck, and the body near the same point- they will glue together there, so any mistakes closing can be sealed between the head/body. Other than that, just be generally careful with the thin parts.

Download: A4 / Letter

EXCADRILL

2013-01-12T21:54:00.003-05:00

530 / EXCADRILL - Pokémon Papercraft
Name: Excadrill
Type: Ground/Steel
Species: Subterrene Pokémon
Height: 0.7 m (2' 04")
Weight: 40.4 kg (89.1 lbs)
Interesting Facts: Excadrill is a dark-colored, bipedal mole-like Pokémon. It has a tapered, pink-tipped snout and a white face. It has large, gray-colored, jagged features on its head and forelimbs, which may be described as looking like axes. Excadrill sports red diamond patterning on the side of its head, forelimbs, and legs, and larger, stripe-like patterns of red on its underside. It has folds on the back of its neck, resembling a hood.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 16.9 cm/ 6.7 in
Depth: 25.4 cm/ 10.0 in
No. of Pages: 6
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the body from top down, closing at the feet. Attach the arms as you go, and be particularly careful with all the smaller parts (helmet, fingers/ arms). Numbers included on template too to help guide you along.

Download: A4 / Letter

CACTURNE (Merry Christmas! 2/2)

2012-12-24T02:47:00.001-05:00

332 / CACTURNE - Pokémon Papercraft

Name: Cacturne
Type: Grass/Dark
Species: Scarecrow Pokémon
Height: 1.3 m (4′03″)
Weight: 77.4 kg (170.6 lbs.)
Interesting Facts: Cacturne has numerous poisonous abilities. In addition, Cacturne's body retains moisture throughout the hot daylight hours. After spending thousands of years in harsh deserts, its blood transformed into the same substances as sand.

THE PAPER MODEL
Height: 20.5 cm/ 8.1 in
Width: 17.6 cm/ 6.9 in
Depth: 10.0 cm/ 3.9 in
Pages: 4
Pieces: 45
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the model starting from the hat. Be carefull when closing it, it's the only tricky part.
Glue it to the face right after the 1st segment of the face is built. Work your way down, attaching the spikes as you go. Close at the legs.

Download: A4 / Letter

BIBAREL (Merry Christmas! 1/2)

2012-12-24T02:25:00.002-05:00

400 / BIBAREL - Pokémon Papercraft

Name: Bibarel
Type: Normal/Water
Species: Beaver Pokémon
Height: 1.0 m (3′03″)
Weight: 31.5 kg (69.4 lbs.)
Interesting Facts: Bibarel are large, bulky, brown beaver-like rodent Pokémon, and more bipedal than their pre-evolution. Bibarel have tan "masks", on their faces and rumples on the sides. There are tan "bibs" on their chests, and they have large, broad dark-brown tails with a wavy tan pattern on them.

THE PAPER MODEL
Height: 15.3 cm/ 6.0 in
Width: 15.9 cm/ 6.3 in
Depth: 21.0 cm/ 8.3 in
Pages: 4
Pieces: 27
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: This model is pretty straightforward, but it's also important to follow the numbers.
Start at the mouth, build the face around it. Close at the bottom. Add the tail after, also, keep note
that the tail can be positioned at the builder's will, but the position on the pdo is a more stable one.
Further instructions included on the template.

Download: A4 / Letter

LEAF

2012-12-21T04:30:00.000-05:00

POKEMON TRAINER LEAF - Pokémon Papercraft
Name: Leaf (Green/Blue in Manga)
Species: Trainer
Height: 1.4 m (4′07″)
Interesting Facts: A person who raises Pokémon and trains them as partners in battle. In battle, a Trainer gives orders to the Pokémon and uses items. It's not an exaggeration to say battles can be won or lost on a Trainer's single strategic move. Trainers pour their hearts into their Pokémon and share anger, sadness, and joy as they adventure in hopes of becoming Pokémon Masters.

THE PAPER MODEL
Height: 18.8 cm/ 7.4 in
Width: 10.8 cm/ 4.3 in
Depth: 5.6 cm/ 2.2 in
Pages: 4 + 1 for Optional Pokeballs
Pieces: 90 + Optional Pokeballs
Level: Hard
Designer: Brandon
Base Model made by Vert092
Photo: LuIS
NOTES: Notes/numbers included. Build the upper and lower body separately, and close the model by attaching them together at the waist. Arms and fingers are particularly tricky- this is a hard craft, take your time and be careful with it.
Pokeballs included are slightly smaller than those included with Red- they are not interchangable. Those included here are 'belted PokeBalls' as opposed to the slightly enlarged battling/catching PokeBalls. General scale of crafts are similar.

Also included is an additional texture pack including the base textures, as well as a variant for the Manga outfit. (PDO usage needed for changing of textures)

Download: A4 / Letter - Texture Pack

FERROTHORN

2012-12-21T04:03:00.000-05:00

598 / FERROTHORN - Pokémon Papercraft
Name: Ferrothorn
Type: Grass/Steel
Species: Thorn Pod Pokémon
Height: 1.0 m (3' 03")
Weight: 110.0 kg (242.5 lbs)
Interesting Facts: Ferrothorn is a Pokémon resembling a flattened durian made of metal. Its body is covered in metal thorns, with three black stripes circling its width, the lower stripe having triangular decorations below the eyes of Ferrothorn. Its eyes have green rims, yellow scleras, and dark pupils. There is a green spike at the top of its body, and extending around it are vine-like, long green appendages tipped with spiky metal disks.

THE PAPER MODEL
Height: 13.3 cm/ 5.2 in
Width: 22.0 cm/ 8.7 in
Depth: 18.9 cm/ 7.4 in
No. of Pages: 4 (Choose between last two pages)
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: Build the body from top down, closing at the bottom. Attach spikes as you go. Build the feelers as well, and attach before closing to allow pressure from the inside when attaching to the body. Do not build both of the last pages. Build page 4 to get a result as pictured, or build page 5 to get a more tripod-like antennae setup. The model stands without weight either way, so long as the antennae are placed in a triangular/balanced pattern. Further notes/numbers on template.

Download: A4 / Letter

PUPITAR v2

2012-12-21T03:51:00.001-05:00

247 / PUPITAR V2- Pokémon Papercraft
Name: Pupitar
Type: Rock/Ground
Species: Hard Shell Pokémon
Height: 1.2 m (3' 11")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Pupitar are somewhat large Pokémon that are encased inside a thick shell made of grayish-blue rock. They have several spikes and holes for eyes and what appears to be eyebrows, but are actually triangular openings. Since its arms and legs are developing inside the shell, Pupitar are capable of venting gas to propel themselves around.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 11.5 cm/ 4.5 in
Depth: 13.8 cm/ 5.4 in
No. of Pages: 3
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the mask and body separately, and attach the body segments before attaching the mask. Each segment of the body closes in itself, to strengthen the body and make it easier to connect.

Download: A4 / Letter

GLACEON v2: Mini

2012-12-18T00:29:00.000-05:00

471 / GLACEONv2 Mini- Pokémon Papercraft

Name: Glaceon
Type: Ice
Species: Fresh Snow Pokémon
Height: 0.8 m (2′07″)
Weight: 25.9 kg (57.1 lbs.)
Interesting Facts: Glaceon is a fox-like creature covered in light-blue fur, which can be frozen into sharp quills. It appears to be wearing a tuque on its head. Glaceon's inner ears, two spots on its back, tail end and cap-endings are all rhombus-shaped and darker blue, in contrast to the soft cyan main body color. Glaceon's feet are also a dark blue color, giving it the impression of wearing boots.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 7.3 cm/ 2.9 in
Depth: 5.4 cm/ 2.1 in
Pages: 1
Pieces: 32
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: The minee-veelutions have turned into a mini-series! Enjoy glaceon, whose biggest complaint is in the small, dainty paws.
Build as you would with umbreon; build the legs first, attaching them as you build the body (starting at the head). Attach her 'hair', then her forehead crest. Then ears and, finally, tail! Enjoy your ice puppy.

Download: A4 / Letter

Umbreon v1

UNOWN X

2012-12-10T02:26:00.001-05:00

201 / UNOWN X - Pokémon Papercraft

Name: Unown - X
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 5.0 cm/ 1.3 in
Width: 16.6 cm/ 3.4 in
Depth: 16.6 cm/ 6.8 in
Pages: 3
Pieces: 22
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible. Pieces are numbered as well.

Download: A4 / Letter

UMBREON v2: Mini

2012-11-10T14:22:00.001-05:00

197 / UMBREONv2 Mini- Pokémon Papercraft

Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 9.4 cm/ 3.7 in
Depth: 5.2 cm/ 2.0 in
Pages: 1
Pieces: 32
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: Another small model, but an easier build than Vaporeon. Start at the bottom of its head, building legs separately and attaching them as you go. Save the ears and tail for last. I also recommend printing with edge padding (when the tab is colored slightly next to the piece itself) because, as you can see by my picture, white lines show too well on this model.

Download: A4 / Letter

Umbreon v1

ZOROARK - (Happy Halloween!)

2012-10-30T21:40:00.001-04:00

571 / ZOROARK - Pokémon Papercraft

Name: Zoroark
Type: Dark
Species: Illusion Fox Pokémon
Height: 1.6 m (5′03″)
Weight: 81.1 kg (178.8 lbs.)
Interesting Facts: Zoroark is a bipedal fox-like Pokémon, and mainly grayish-brown in coloration with crimson and black accents. It has a pointed snout and ears, the insides of which have red coloration. Zoroark also has some red rimming its eyes and mouth. Zoroark has a large, voluminous mane, primarily red in coloration but with black tips. The mane also somewhat resembles a ponytail, as a teal bangle down its length separates a mass of the mane from the lower portion.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 26.3 cm/ 10.4 in
Depth: 18.5 cm/ 7.3 in
Pages: 5
Pieces: 101
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and legs as you go. Be careful with the teeth, they're tiny. Further instructions are included.

Download: A4 / Letter

URSARING

2012-10-29T02:54:00.003-04:00

217 / URSARING - Pokémon Papercraft

Name: Ursaring
Type: Normal
Species: Hibernator Pokémon
Height: 1.8 m (5′11″)
Weight: 125.8 kg (177.3 lbs.)
Interesting Facts: Ursaring are known for their food-collecting habits; they often walk through forests in the mornings to collect Berries. They also have an excellent sense of smell and use it to find and dig up food buried deep underground. They have been observed scratching trees, leaving marks which show that they bear good fruit. Despite their large size, they are able to find food and sleep in the treetops, although they still prefer to snap trees with their forelegs and eat the fallen Berries.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 15.2 cm/ 6.0 in
Depth: 14.7 cm/ 5.8 in
Pages: 4
Pieces: 57
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the head down, attaching everything along the way. Close at the bottom of the feet.

Download: A4 / Letter

ARTICUNO

2012-10-16T01:32:00.000-04:00

144 / ARTICUNO - Pokémon Papercraft

Name: Articuno
Type: Ice/Flying
Species: Freeze Pokémon
Height: 1.7 m (5′07″)
Weight: 55.4 kg (122.1 lbs.)
Interesting Facts: Articuno first appeared in the second movie. Lawrence III attempted to collect Articuno and the two other legendary birds in his scheme to capture Lugia. Also, the Frontier Brain Noland uses an Articuno against certain challengers, as seen in the episode Numero Uno Articuno and The Symbol Life, when he accepted Ash's challenge and battled against him.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 38.3 cm/ 15.1 in (Wing span)
Depth: 34.7 cm/ 13.7 in
Pages: 4
Pieces: 47
Level: Medium
Designer: PODragon
Photo: Carnilmo
NOTES: Build from the beak back, attaching wings and feet as you go. Be careful with the wings- you'll need to reinforce them somehow- Carnilmo recommends inserting a toothpick into them after the wings are attached to the body. Feel free to experiment though, at your own risk :p Further notes included in the packs.

Download: A4 / Letter

VAPOREON v2: Mini

2012-10-05T11:28:00.001-04:00

134 / VAPOREONv2 Mini- Pokémon Papercraft

Name: Vaporeon
Type: Water
Species: Bubble Jet Pokémon
Height: 1.0 m (3'03″)
Weight: 29.0 kg (63.9 lbs.)
Interesting Facts: Vaporeon are highly adapted to aquatic life. Unlike its pre-evolution, it has the ability to breathe underwater. As stated previously, they have a unique molecular structure. They have the ability to "melt" into a body of water and disappear completely from view.

THE PAPER MODEL
Height: 7.5 cm/ 3.0 in
Width: 7.0 cm/ 2.8 in
Depth: 7.2 cm/ 2.8 in
Pages: 1
Pieces: 49
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: Since it's so small, it might be a little tricky. Build the head and body separate, joining them on the neck frill. Attach the back frill as you build the body, and attach the tail piece when the body is complete. Help included in pack.

Download: A4 / Letter

Vaporeon v1

DARUMAKA

2012-09-22T20:36:00.000-04:00

554 / DARUMAKA - Pokémon Papercraft

Name: Darumaka
Type: Fire
Species: Zen Charm Pokémon
Height: 0.6 m (2'00″)
Weight: 37.5 kg (82.7 lbs.)
Interesting Facts: Darumaka is a red, circular Pokémon. Above its eyes are yellow curly eyebrows and its face is orange. Three yellow ovals are on its abdomen and a curvy yellow line is on its back. Its paws are orange and have three digits each.

THE PAPER MODEL
Height: 11.5 cm/ 4.5 in
Width: 16.4 cm/ 6.5 in
Depth: 11.3 cm/ 4.4 in
Pages: 2
Pieces: 41
Level: Easy/Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from the head down, attaching the eyebrows and arms when possible. Close at the legs, and attach the feet afterward. The only particularly tricky parts here are the feet and hands. I strongly recommend doing the 2D hands, unless you're up for a challenge.

Download: A4 / Letter

UNOWN - Z

2012-08-09T19:44:00.001-04:00

201 / UNOWN Z - Pokémon Papercraft

Name: Unown - Z
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 3.2 cm/ 1.3 in
Width: 8.6 cm/ 3.4 in
Depth: 17.3 cm/ 6.8 in
Pages: 2
Pieces: 16
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible. Pieces are numbered as well.

Download: A4 / Letter

UNOWN - Y

2012-08-09T02:46:00.001-04:00

201 / UNOWN Y - Pokémon Papercraft

Name: Unown - Y
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 3.4 cm/ 1.3 in
Width: 17.0 cm/ 6.7 in
Depth: 12.2 cm/ 4.8 in
Pages: 2
Pieces: 25
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible.

Download: A4 / Letter

GARCHOMP

2012-07-27T00:24:00.002-04:00

445 / GARCHOMP - Pokémon Papercraft

Name: Garchomp
Type: Dragon/Ground
Species: Mach Pokémon
Height: 1.9 m (6′03″)
Weight: 95.0 kg (209.4 lbs.)
Interesting Facts: Garchomp are dark blue, with a red underbelly that covers from the middle of its abdomen, to its jaws, and then to the undersides of its arms. Underneath the red is a gold diamond shape as well a gold cross on its snout; which gives Garchomp a close resemblance to Sharpedo, with close to the same body color as it. Garchomp have appendages that resemble jets, planes and hammerhead sharks; its four fins, one on each arm, one dorsal fin and another on its tail that resembles a shark tailfin; horns that resemble jet/plane engines rest on its head, resembling a hammerhead. It has spikes on its hind limbs and arms as well as sharper claws than its previous evolution. Its eyes have black scleras and gold-colored irises. Its pupils have shrunk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 20.8 cm/ 8.2 in
Depth: 25.8 cm/ 10.2 in
Pages: 5
Pieces: 94
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and fins as possible. Further notes included. It's a tough model, so if you're just starting out try something else as a warm up.

Download: A4 / Letter