Ivenue Solution Tech Team

WBR-6002 wireless security setting

noreply@blogger.com (Ivenue Tech Team) — Wed, 28 Oct 2009 05:28:00 +0000

*Note: You have to connect your PC to the router and make sure the cable is plug in LAN port and the router is power on.

1.Open your Internet browser, example: Internet Explorer, and key in 192.168.0.1 at address bar, and insert the username as admin and the password is password.

Figure 1 : Insert username as admin and password is password.

Figure 2: Go to wireless > Options to change your wireless name/SSID and click on the Configure SSID 1 icon to set the security.

Figure 3: Choose your wireless security types.

Figure 4 : Key in your wireless security key and click on the Save button.

Figure 5:After has click the save button, click on the Back button for back to the Options.

Figure 6 : In the Options page, click the save button to save the setting one more time.

Figure 7 : After has save all the setting,c click on log out button to exit the page.

For make sure your security setting is active , you can relog-in again to see the setting just like figure no 8.

Figure 8 :The wireless security is active now.

The wireless security funtions should be active now, enjoy your internet connection with wireless security funtion.

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WSK-3000 WDS configuration Guide

noreply@blogger.com (Ivenue Tech Team) — Fri, 16 Oct 2009 03:42:00 +0000

WSK-3000 WDS step by step

TURN OFF your Anti-Virus & Firewall Program, e.g. Norton Anti-Virus before start installation

STEP 1: Launch your internet explorer and key in "192.168.0.1" then press enter
STEP 2: Key in username: admin , password: password. Then press ok.

STEP 3: Click on wireless, region select Asia. SSID: any name you like. Unpick enable WPS. Select enable WDS, and key in router 2 MAC address in AP1, then save it. After save you have to restart the router.

Wireless Router B Setting

Factory Default Setting:
IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 DHCP: Enable
-------------------------------------------------------------
TURN OFF your Anti-Virus & Firewall Program, e.g. Norton Anti-Virus before start installation

STEP 1: Launch your internet explorer and key in "192.168.0.1" then press enter.
STEP 2: Key in username: admin , password: password. Then press ok.

STEP 3: Click on LAN, and change the IP address to 2 for not IP config with router 1. Then click save.

STEP 4: Click on wireless, region select Asia. SSID: any name you like. Unpick enable WPS. Select enable WDS, and key in router 2 MAC address in AP1, then save it. After save you have to restart the router.

Finally done the step for do WDS please try ping to each router for confirm both are connected.

After completely configure, you can open command prompt for check WDS status.
STEP A: START->RUN..->TYPE ‘cmd’ and press on OK
STEP B: Type "ping 192.168.0.1 -t"
STEP C: Open another command prompt and type "ping 192.168.0.2 -t"
*You should able to see continuous ping response if the WDS done successfully

The ciritcal factors for make the WDS are:
1)IP address for both router must be different and in same range, example Router 1 is 192.168.0.1 and Router 2 is 192.168.0.2
2)Wireless SSID, Security type and password must be same for both router 1 and router 2.
3)All devices should not having same IP address, example modem, printer, PC.
4)Save the setting after configure, and restart the router, and then logout from the router or switch off and switch on the both routers agian.

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my
Posted by Ivenue Tech Team at Friday, October 16, 2009

Port Forwarding WSK-3000

noreply@blogger.com (Ivenue Tech Team) — Tue, 13 Oct 2009 02:55:00 +0000

If you need to view IP camera installed in the LAN of WSK-3000 from the Internet by your computer. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WSK-3000

2.After log in to the configuration page go to Advanced.

3.Go to advanced > Single Port forwarding.

4.Insert Application name, External port, internal port and Protocol.

5.After key in application name and IP address tick on the Enable and SAVE the setting.

6.You are now able to view the IP Camera with the Public IP Address of WBR-5400 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

How to configure port forwarding in WBR-5400 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Fri, 18 Sep 2009 09:24:00 +0000

If you need to view IP camera installed in the LAN of WBR-5400 from the Internet by your computer. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-5400.

2. Click on Forwarding Rules -> Virtual Server

3. Here we use WCS-2060 at IP Address “192.168.123.10” for example.
WCS-2060 requires port 80 to be forwarded to its LAN IP address.
Public port and Private port should be the same.
Protocol selects TCP/UDP.

4. You are now able to view the IP Camera with the Public IP Address of WBR-5400 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

WBR-5400 Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Fri, 18 Sep 2009 08:36:00 +0000

*Note: You have to connect your PC to the router and make sure the cable is plug in LAN port and the router is power on.

1. Open your Internet browser, example: Internet Explorer, and key in 192.168.123.254 at address bar.
2. Key in "admin" at the textbox and clik "Login".

3. Click "Wizard".

4. Click "Next" to continue.

5. Select "PPP over Ethernet" mode, then click "Next".

6. Key in username and password for your streamyx, then click "Next".

7. Key in your SSID and select Security to protect your network, then click "Next".

8. Click "Reboot" and click "OK" for save configuration then wait router to reboot and connect to Internet.

*Note: You should be able to enjoy your Internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

*For make sure your connection is up, you can go to "Status" and check the Internet status.

*Note: If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WUA-0600 N-Max Wireless USB Adapter Configuration Guide

noreply@blogger.com (Ivenue Tech Team) — Wed, 16 Sep 2009 04:18:00 +0000

*Note: Do not plug the USB Adapter before install driver.

Insert the N-Max Wireless USB Adapter Utility CD and install the utility.

After complete install the utility, you should able to see the utility appear in the taskbar, then double click it.

WUA-0600 utility windows will pop out, select your wireless network and click "Add to Profile".

Click "Auth.\ Encry" and key in your wireless security password and click "OK", and the setting will automatic save. (Your PC will connect to the wireless network automatically for next time)
*Check your wireless network Authentication and Encryption for make sure your setting is matching with your wireless network.

You can check the connection status with this page.

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WCS-0010 Wireless IP cam Configuration Guide

noreply@blogger.com (Ivenue Tech Team) — Tue, 08 Sep 2009 06:45:00 +0000

*Note 1: Make sure PC is connect to IP cam with cable.
*Note 2: Configure the IP to fixed IP address as figure below:

Goto: Basic Configuration Guide (Fixed IP Address)
Goto: Connect to Wireless Router (WBR-3601)

(Basic Configuration Step)
STEP 1: Put LevelOne CD into CD/DVD ROM and Click "Camera Wizard".

STEP 2: Click "Setup Camera" and wait for "Searching for Network Camera".

STEP 3: Select the "WCS0010" and Click the ">" button.

STEP 4: Select the Time Zone, and adjust the Date and Time then Click ">" button.

STEP 5: Select "Fixed IP Address" then Click ">" button.

STEP 6: Key in the IP address setting and Click ">" button.

STEP 7: Confirm the Setting and Click ">" button then Click "OK" to save the Setting.

(Connect to Wireless Router or Access Point with wireless)
*Note: WCS-0010 Wireless IP cam only can connect to Wireless Router or Access Point with WEP or WPA-PSK/WPA2-PSK Security.
*Below is example for WCS-0010 connect WBR-3601 wireless router.
WBR-3601 Wireless Router Setting:
SSID: WBR-3601
Authentication Type: WEP-64Bits
WEP Key 1: 1234567890

STEP 1: Run LevelOne CD and Click "Camera Wizard".

STEP 2: Click "Setup Camera" and wait for "Searching for Network Camera".

STEP 3: Double Click the "wcs0010", then a browser will pop out. (e.g, Windows Internet Explorer)

STEP 4: Click "Administration" and Key in default username: (administrator) & default password: (blank).

STEP 5: Click "Wireless", then Key in the SSID: (WBR-3601), Security System: (WEP), WEP Encryption Key 1: (1234567890), and then Click "Save".

STEP 6: Unplug the cable and switch off and on the IP cam, and you should able to view your IP cam with Wireless Connection.

*The IP cam will auto assign an IP address since it cannot detect the default gateway device. Once the Ip cam is connected to the network with correct Default Gateway, the IP address of the IP cam will be change to fixed IP address.
* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

How to configure port forwarding in WBR-6000 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Wed, 26 Aug 2009 08:24:00 +0000

The Port Forwarding Condiguration Guide of WBR-6000 is same as WBR-3408, therefore you can refer WBR-3408 Port Forwarding Configuration Guide.

Below is the URL Link:
How to configure port forwarding in WBR-3408 to view IP Camera?

WBR-6000 Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 26 Aug 2009 03:59:00 +0000

*Note:You have to connect your PC to the router and make sure the cable is plug in LAN port and the router is power on.

1. Open your Internet browser, example: Internet Explorer, and key in 192.168.0.1 at address bar.
2. Key in user name and password. *(the default user name is admin; password is password).

3. Select "Setup Wizard".

4. Click "Next" to continue.

5. Select "DSL/ADSL Modem", then click "Next".

6. Select "PPPoE", then click "Next".

7. Key in username and password for your streamyx. Select "Keep alive (maintain connection)", then click "Next".

8. Select "IP Address is assigned automatically", then click "Next".

9. Click "Finish" for save configuration then wait router to reboot and test Internet connection.

10. When Test Result show "Internet access is now available", that's mean you are able to use your Internet.

*Note: If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WBR-6002 Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 26 Aug 2009 02:54:00 +0000

*Note:You have to connect your PC to the router and make sure the cable is plug in LAN port and the router is power on.

1. Open your Internet browser, example: Internet Explorer, and key in 192.168.0.1 at address bar.

2. Key in user name and password. *(the default user name is admin; password is password).

3. Select "Setup Wizard"

4. Select "Ethernet" and click "Next".

5. Select "Login" and "PPPoE", then click "Next".

6. Key in username and password for your Streamyx then click "Finish".
*Note: Make sure the user name and password is correct.

7. Click "OK" to save and reboot the router.

*Note: You should be able to enjoy your Internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

*For make sure your connection is up, you can go to "Status" and check the Internet status.

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WBR-3601 Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 26 Aug 2009 01:42:00 +0000

*Note:You have to connect your PC to the router and make sure the cable is plug in LAN port and the router is power on.
1. Open your Internet browser, example: Internet Explorer, and key in 192.168.0.1 at address bar.
2. Key in user name and password. *(the default user name is admin; password is password).

3. Select "Quick Start".

4. Click "Run Wizard".

5. Click "Next".

6. Key in new password for your router or leave it blank(remain the password) and click "Next".

7. Select "Time Zone" and click "Next"

8. Select "PPPoE" and click "Next".

9. Key in user name and password for your streamyx, and VPI change to 0 and click "Next". *Note:(Make sure the user name and password you key in no wrong.)

10. Click "Next" to save the configuration.

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

*For make sure your connection is up, you can go to "Status" and check the WAN status.

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

How to configure port forwarding in WBR-6002 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Wed, 26 Aug 2009 01:16:00 +0000

If you need to view IP camera installed in the LAN of WBR-6002 from the Internet either by your computer. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-6002.

2. Click on Advanced -> Single Port Forwarding.

3. Here we use FCS-1040 at IP Address “202.73.11.20” for example.
FCS-1040 requires port 1020 to be forwarded to its LAN IP address.
Public port and Private port should be the same.
Protocol selects TCP/UDP.

4. You are now able to view the IP Camera with the Public IP Address of WBR-6002 from Internet.

What about my IP Camera is not FCS-1040?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

How to configure port forwarding in WBR-3601 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Tue, 25 Aug 2009 08:08:00 +0000

If you need to view IP camera installed in the LAN of WBR-3601 from the Internet by your computer. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-3601.

2. Click on Advanced Setup -> Firewall. Then disable Firewall.

3. Click on Advanced Setup -> NAT -> Virtual Server.

4. Here we use WCS-2060 at IP Address “192.168.0.10” for example.
WCS-2060 requires port 80 to be forwarded to its LAN IP address.
Public port and Private port should be the same.
Protocol selects TCP/UDP.

5. You are now able to view the IP Camera with the Public IP Address of WBR-3601 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

How to configure port forwarding in WBR-6600 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Mon, 24 Aug 2009 10:04:00 +0000

If you need to view IP camera installed in the LAN of WBR-6600 from the Internet by your computer. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-6600.

2. Click on Configuration -> Virtual Server -> Port Mapping.

3. Here we use WCS-2060 at IP Address “192.168.0.10” for example.
WCS-2060 requires port 80 to be forwarded to its LAN IP address.
Public port and Private port should be the same.
Protocol selects TCP/UDP.

4. You are now able to view the IP Camera with the Public IP Address of WBR-6600 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

WBR-3408 Wireless Security Issue in Windows XP

noreply@blogger.com (Ivenue Tech Team) — Thu, 30 Jul 2009 07:55:00 +0000

1)Windows Zero Utility Unable Connect with WEP and WPA2-PSK Security in Windows XP

a)WEP validating identity problem:

Solution:
STEP 1: Click “Change advanced settings” then it will prompt out a ‘Wireless Network Connection Properties” window

STEP 2: Click “Wireless Networks” and Click “Add”

STEP 3: Key in “SSID” for your network then choose “WEP” and un-tick “The key is provided for me automatically”, then key in your password key at “Network key” and “Confirm network key”, then Click “OK” for save the setting.

Noted: You should able to get connected to the network.

b) WPA2-PSK problem: In windows, Windows Zero Utility does not support WPA2-PSK. Therefore, we recommend user to not used WPA2-PSK for wireless security, unless user got another wireless connection utility like Level One Wireless Network Utility which work with Level One Wireless Adapter.

WEP and WPA-TKIP Security Issue for 802.11n Draft

noreply@blogger.com (Ivenue Tech Team) — Thu, 02 Jul 2009 07:50:00 +0000

The 802.11n Draft prohibits use of high speed with WEP or WPA-TKIP. If you use encryption methods of WEP, WPA-TKIP, your data rate will be reduced to 54Mbps.

Please refer to the link below:
http://support.intel.com/support/wireless/wlan/4965agn/sb/cs-025643.htm

How to configure port forwarding in WBR-6001 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Tue, 23 Jun 2009 08:02:00 +0000

If you need to view IP camera installed in the LAN of WBR-6001 from the Internet either by your computer or mobile device. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-6001.

2. Click on Advance -> Forwarding Rules.

3. Click on Virtual Server.

4. Here we use WCS-2060 at IP Address “192.168.61.10” for example.
WCS-2060 requires port 80 and 554 to be forwarded to its LAN IP address.
Public port and Private port should be the same.
Protocol selects both.
And please do not forget to enable the rule.

5. You are now able to view the IP Camera with the Public IP Address of WBR-6001 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80, 554. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google
Search Tool does not block the Pop up Windows.

How to configure port forwarding in WBR-3408 to view IP Camera?

noreply@blogger.com (Ivenue Tech Team) — Tue, 23 Jun 2009 07:46:00 +0000

If you need to view IP camera installed in the LAN of WBR-3408 from the Internet either by your computer or mobile device. You will need to configure Port Forwarding (some devices might call it Virtual Server, Port Mapping). This guide will help you step by step.

1. Please log in the web interface of WBR-3408.

2. Click on Advanced.

3. Click on PC Database.

4. Add the WCS-2060 IP address into PC Database; here we use “192.168.0.3”.
Please note WBR-3408 should find the IP address of WCS-2060 automatically, in that case you do not need to input the IP address again in the PC Database.
You can use the software in the IP Camera package or IP Cam Secure to locate The IP address of WCS-2060 or IP Camera.

5. Here it shows we add WCS-2060 with IP Address 192.168.0.3 into the PC Database.

6. Return to Advanced Menu.

8. Please select “Web” under Servers Section.
Click on “Enable” it in the Properties.
Select the WCS-2060 under PC (Server)
Select “TCP/IP” Protocol.
Keep the internal and external ports as default 80.
Click on Update Selected Server.

9. Add another RTSP port in Virtual server.
Please configure as below and click on “Add a new server”.

10. You are now able to view the IP Camera with the Public IP Address of WBR-3408 from Internet.

What about my IP Camera is not WCS-2060?
Please refer to the IP Camera Port Forwarding Reference table for your model.
http://www.level1.tw/level1/faq/IPCam%20Port%20Forwarding%20Reference.xls
Simply add the port number in your Virtual Server configuration Page.

What about if my public IP address is Dynamic.
You can create a DynDNS account; configure it into your router. Your router will constantly update the IP address information to DynDNS server.
Please refer to
http://www.level1.tw/level1/faq/How%20to%20create%20DynDNS%20account.pdf

How come I can not view the Video Streaming?
1. Please make sure your firewall does not block the port you forwarded, e.g. Port 80, 554. Or disable your firewall.
2. The firewall can be your Windows build in firewall, Anti Virus Firewall e.g. Symantec Internet Security, PCCillin Internet Security etc…
3. Please make sure you had installed the Active X that is required to view the video streaming.
4. Please make sure your Internet Explorer browser or Plug in tool e.g. Google Search Tool does not block the Pop up Windows.

FBR-1418TX Broadband Router Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Thu, 18 Jun 2009 06:16:00 +0000

Factory Default Setting:
IP Address: 192.168.123.254 Subnet Mask: 255.255.255.0 DHCP: Enable
-----------------------------------

STEP 1: Launch your internet explorer and key in "192.168.123.254" then press enter.
STEP 2: Key in "admin" at the Login text box then click "Login".

STEP 3: Click "Wizard" then click "Next".

STEP 4: Select "PPPoE" then click "Next".

STEP 5: Key in your streamyx username and password then click "Next".

STEP 6: Click "Reboot" then click "OK" to save and restart modem.

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

*If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

FBR-1461 ADSL2+ Modem Router Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 17 Jun 2009 07:57:00 +0000

Factory Default Setting:
IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 DHCP: Enable
-----------------------------------

STEP 1: Launch your internet explorer and key in "192.168.1.254" then press enter.
STEP 2: Key in "admin"at Username and Password text box then click ok.

STEP 3: Click "Quick Start", then Select "PPPoE LLC" for Encapsulation, VPI set to "0", VCI set to "35".
STEP 4: Key in your streamyx username and password at PPP group then click "Apply".

STEP 5: Click "Save Config to FLASH" or "Save Config", then click "Apply" to save the setting.

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WBR-3405TX Wireless Broandband Router Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 17 Jun 2009 05:53:00 +0000

Factory Default Setting:
IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP: Enable
-----------------------------------

STEP 1: Launch your internet explorer and key in "192.168.1.1" then press enter.
STEP 2: Key in "admin"at Username and Password text box then click ok.

STEP 3: Click "Next" and Click "Next" for unchange admin's password.

STEP 4: Choose your region Time Zone then click "Next". (Eg. GMT+08.00 for Malaysia)

STEP 5: Click "Next" for remain the LAN Setting.

STEP 6: Select "PPPoE to obtain IP automatically" and click "Next".

STEP 7: Key in your streamyx and password then click "Next".

STEP 8: Click "Next" to remain wireless setting.

STEP 9: Click "Restart" to save the setting.

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

FCS-1030 IP Camera Configuration Guide

noreply@blogger.com (Ivenue Tech Team) — Wed, 17 Jun 2009 03:41:00 +0000

*Note 1: Make sure just LAN connection is available and disable all others Network Connection. Eg. Wireless Connection.
*Note 2: Make sure IP cam is connected to the "Available LAN connection". (It will show "Limited or no connectivity")

STEP 1: Put CD into CD/DVD ROM and Install IP cam "Installation Wizard".

STEP 2: Open "Installation Wizard" at the desktop, and it will pop up a Installation Wizard window.
STEP 3: Select the "List Item" and Click "Manual Setup".

STEP 4: You can set the password of "root" user and Click "Next".

STEP 5: Click "No" and Untick "Get IP by DHCP Server Automatically", then Key in IP address, Subnet mask, Default gateway for your network, then Click "Next".

STEP 6: Click "Apply" to save the setting and the IP cam should be ready to use.

*The IP cam will auto assign an IP address since it cannot detect the default gateway device. Once the Ip cam is connected to the newtork with correct Default Gateway, the IP address of the IP cam will be change to fixed IP address.
* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

WBR-3800 MobilSpot 3G Wireless Router Configuration Guide for Steamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Thu, 11 Jun 2009 09:50:00 +0000

Factory Default Setting:
IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 DHCP: Enable
----------------------------------------------
TURN OFF your Anti-Virus & Firewall Program, e.g. Norton Anti-Virus before start installation

STEP 1: Launch your internet explorer and key in "192.168.1.254" then press enter
STEP 2: Key in "admin" at User name and Password text box then click OK

STEP 3: Select "WIZARD" then click "ENTER", then click "NEXT"

STEP 4: click "NEXT" to remain the adminstrator's password

STEP 5: Select "PPPoE" and click "NEXT"

STEP 6: Key in "your streamyx username and password" then click "NEXT"

STEP 7: click "NEXT" to remain the wireless setting

STEP 8: check and confirm the information then click "Apply Setting" to save

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

FBR-1161 Modem+Router Configuration Guide for Streamyx ISP

noreply@blogger.com (Ivenue Tech Team) — Wed, 10 Jun 2009 08:55:00 +0000

Factory Default Setting:
IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 DHCP: Enable
---------------------------------------------------------------------------------
TURN OFF your Anti-Virus & Firewall Program, e.g. Norton Anti-Virus before start installation

STEP 1: Launch your internet explorer and key in "192.168.1.254" then press enter
STEP 2: Key in "admin" at User name and Password text box then click OK

STEP 3: Click "RUN WIZARD" then click "NEXT"

STEP 4: Key in "admin" at New Password and Confirmed Password text box then click "NEXT"

STEP 5: Select "GMT+08.00" then click "NEXT"

STEP 6: Select "PPPoE/PPPoA" then click "NEXT"

STEP 7: Key in your "Streamyx username and password", and Key in "0" for VPI and "35" for VCI and Select "PPPoE LLC" for Connection Type, then click "Next"

STEP 8: Click "NEXT" for finish the configuration

*Note: You should be able to enjoy your internet connection now. If not, kindly make sure your Streamyx username & password are correct, phone cable already plug in to your router and your LAN cable is plug in to your PC horoscope

* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my

Ivenue Solutions Sdn. Bhd. Map

noreply@blogger.com (Ivenue Tech Team) — Wed, 10 Jun 2009 07:19:00 +0000

Address:
37-2, Jalan PJS 11/2, Subang Indah, 46000 Petaling Jaya, Selangor Darul Ehsan, Malaysia.