ElectroMice

Flash News: 31 feared killed, many injured in fire in Sivakasi fireworks unit

noreply@blogger.com (Blogger) — Wed, 05 Sep 2012 10:39:00 +0000

SIVAKASI: In a major fire accident, at least 31 persons were feared dead, while dozens more injured in an explosion in a fireworks manufacturing unit in Sivakasi in Virudhunagar district in south Tamil Nadu. While police confirmed that 10 bodies were pulled out of the debris, they say the number of deaths could be higher. The accident occurred around 12.15pm at Om Sakthi Fireworks in Mudhalaipatti, located in the fireworks manufacturing hub of Sivakasi. About 40 rooms in the manufacturing unit collapsed, trapping many of the employees.

There were about 250 employees working in the unit when the accident occurred and many of them are trapped in the debris. "We are uncertain about the extent of damage and casualty. We fear that more than ten persons could be dead," said a senior revenue official. Fire and rescues services as well as ambulances could not get near the cracker unit for fear of another explosion due to huge quantity of chemicals stacked. They were unable to gain access to the accident spot for more than two hours as the two rooms are still burning and are expected to explode any time. The death toll is expected to rise as many more workers would have been trapped inside the buildings.

A few injured, who were flung away in the impact of the explosion, were being rushed to government hospital in Sivakasi and then to government hospital in Madurai. Revenue officials blamed labourers and said the accident could have occurred due to friction among the chemicals. This is one of the biggest explosions in the last few years at Sivakasi. This year, so far four explosions have occurred in various fire cracker units in Sivakasi and about five people were killed.

Police said Om Sakthi Fireworks was involved in making fancy fireworks, which are more dangerous when compared to the crackers that are intended to make loud noise rather than illuminate. The chemicals used in fancy crackers spread fast and also cause extensive damage. This was the reason for the fire to spread from one of the rooms where it originated to all the 40 rooms in the unit. While many employees working there suffered injuries, few villagers who rushed to help them were also injured in a blast and the ensuing fire.

There are about 600 major fire cracker units in Virudhunagar district while hundreds of small and minor units are functioning with about 30,000 workers.

Source: http://timesofindia.indiatimes.com

Dancing Washing Machine–Funny!

noreply@blogger.com (Blogger) — Mon, 19 Sep 2011 14:34:00 +0000

Dancing Washing Machine–Funny!

How to feed a Croc…..!

noreply@blogger.com (Blogger) — Fri, 09 Sep 2011 07:20:00 +0000

How to feed a Croc…!

David Blaine–See his live heart…!!!

noreply@blogger.com (Blogger) — Fri, 09 Sep 2011 07:18:00 +0000

David Blaine’s Live Heart….!

Awesome Kids….!

noreply@blogger.com (Blogger) — Fri, 09 Sep 2011 07:15:00 +0000

Talented Kids….!

How to move Thunderbird default mail storage location…

noreply@blogger.com (Blogger) — Wed, 27 Jul 2011 10:57:00 +0000

This post will explain, how to move Mozilla Thunderbird’s default mail storage (Profile) to a new location (i.e. to another drive or to some other folder)

Know something about Thunderbird Profiles :

Thunderbird saves personal information such as messages, passwords and user preferences in a set of files called a "profile", which is stored in a separate location from the Thunderbird program files. While it is possible to have multiple profiles, most users just use the single default. (See Using Multiple Profiles for more information.)

What is a profile?

In Thunderbird, the profile stores two main sets of items. First, it stores your local mail, and possibly copies of messages that reside on the mail server (depending on your account configuration). Second, it stores any changes you make while using Thunderbird (for example, changes to account settings and changes to the toolbar).

When you install Thunderbird it creates a profile called "default". This profile will be used automatically unless you invoke the Profile Manager and create a new profile.

Where is my profile stored?

Profile files are stored separately from the Thunderbird program files. The program files are static and do not change (except when you upgrade the Thunderbird application version). Because we store profile and program files separately, you can uninstall Thunderbird without losing your messages and settings, and if something goes wrong with a Thunderbird update your information will still be available. It also means that you don't have to reinstall Thunderbird in order to delete your information or troubleshoot a problem.

Each profile is stored on your hard drive in a profile folder. The folder is named using the following convention:

<random_string>.<profile_name>

...where "<random_string>" is eight digits randomly generated by Thunderbird and "<profile_name>" is the name you assigned to the profile. The location of the folder will vary according to the operating system (and whether or not you specified a non-default location when you created the profile):

%APPDATA%\Thunderbird\Profiles\xxxxxxxx.default\.

%APPDATA% is shorthand for the C:\Users\<username>\AppData\Roaming\ folder (Windows 7/Vista) or the C:\Documents and Settings\<username>\Application Data\ folder (Windows XP/2000), which depends on your Windows user account name.

~/Library/Thunderbird/Profiles/xxxxxxxx.default/.

The tilde ("~") symbol in the path is shorthand for your home directory.

~/.thunderbird/xxxxxxxx.default/.

How to find your profile

If you are having difficulty finding the location of your profile, use the following instructions to search your filesystem:

Windows Vista and 7

Click the Windows Start button and type %APPDATA%\Thunderbird\Profiles\ in the Search box at the bottom of the Start menu, without pressing Enter. A list of profiles will appear at the top of the Start menu.

Click on any of the profiles (e.g. xxxxxxxx.default) to open it with Windows Explorer.

On Windows 2000 and XP

Click the Windows Start button, and select Run....

Type in %APPDATA%\Thunderbird\Profiles\ then click OK.

Windows Explorer opens a folder containing your profiles.

Double-click the profile folder you wish to open (e.g. the xxxxxxxx.default folder).

On Mac

Open Finder and go to your home folder (which is usually the name of your Mac user account).

From your home folder open /Library/, then /Thunderbird/, then /Profiles/. Your profile folder is within this folder.

On Linux (Ubuntu)

Click the Places menu on the top right of the screen and select Home Folder. A File Browser window will appear.

Click the View menu and select Show Hidden Files if it isn't already checked.

Double click the folder marked .thunderbird. Your profile folder is within this folder.

Backing up a profile

To back up your profile, simply shut down Thunderbird and then copy the profile folder to a backup location (such as an external disk or drive).

Moving a profile

Occasionally, you might want to move a profile or tell Thunderbird to use a profile stored in another location.

Shut down Thunderbird.

Move the profile folder to the desired location (Simply, cut the folder xxxxxxxx.default and paste it to the desired new location. don’t forget to note the new location path). For example, on Windows XP, move the profile from C:\Documents and Settings\[username]\Application Data\Thunderbird\Profiles\xxxxxxxx.default to D:\Stuff\MyMailProfile. (If you are reverting to a backed up profile, this step isn't necessary. Just note the current location of the profile you want to restore.)

Open up the profiles.ini file in a text editor. The file is located in the application data folder for Thunderbird:

On Windows 7/Vista/XP/2000, the path is %AppData%\Thunderbird\

On Windows 95/98/Me, the path is usually C:\WINDOWS\Application Data\Thunderbird\

On Linux, the path is ~/.thunderbird/

On Mac OS X, the path is ~/Library/Thunderbird/

In the profiles.ini file, locate the entry for the profile you've just moved. Change the Path= line to the new location.

If you switch from a relative path to a non-relative path, the direction of the slashes may need to change. For example, in Windows, non-relative paths use backslashes, whereas relative ones use forward slashes. Change IsRelative=1 to IsRelative=0. If you are using Microsoft Windows based system, simply change the IsRelative=1 to IsRelative=0.

Save profiles.ini and restart Thunderbird.

Patalpani Accident, Indore India (Video)

noreply@blogger.com (Blogger) — Wed, 20 Jul 2011 12:58:00 +0000

Sure, you will get tears after watching this…..

Patalpani Accident, Indore India (Live)

I’m really not willing to post this video here and I’m so sorry for this. But I wanted that, everybody should get aware about water and its vigorous.

Be careful friends, enjoy waterfall only from a comfortable distance. As I heard, only 2 of them alive.

Google Plus (G+) Free Invitations

noreply@blogger.com (Blogger) — Thu, 14 Jul 2011 06:57:00 +0000

Due to some privacy policy restriction, Invitations are available only on request. Post your request as a comment with your email ID.

Note: Type your mail ID as 1234(at)gmail.com to avoid spam mails.

Picture Mixture–1 (Funny)

noreply@blogger.com (Blogger) — Mon, 11 Jul 2011 06:00:00 +0000

Power of a girl……

Funny Video Compilation - 1

noreply@blogger.com (Blogger) — Sat, 09 Jul 2011 09:04:00 +0000

Young Gymnast–Really Wonderful

noreply@blogger.com (Blogger) — Sat, 09 Jul 2011 08:33:00 +0000

IPL Cricket Horn (Trumpet) Ringtone (New)

noreply@blogger.com (Blogger) — Sat, 19 Mar 2011 06:17:00 +0000

Download Famous IPL Cricket Horn (Trumpet) Ringtone in mp3 format. Click below link to download.

http://www.mediafire.com/?gojuzio8x84ol5a

Demonoid is moving!

noreply@blogger.com (Blogger) — Fri, 03 Dec 2010 04:16:00 +0000

Demonoid recently announced that they migrating their site to a new address, http://demonoid.me

Their Anouncement:

We are in the process of migrating the site to our new address, Demonoid.ME
Please update your torrents to the new tracker address, inferno.demonoid.me
Additionally, you can re download them and get them with the new address automatically Also, don't forget to update your bookmarks and RSS feeds

More Demonoid Invitations – Nov 2010

noreply@blogger.com (Blogger) — Wed, 24 Nov 2010 04:08:00 +0000

nastyninjaX97dcqh1xhyz74rlvwx1ai0p3m
nastyninjaXfjc603wwy1mzzm02qh9onmcabjdp
nastyninjaXvj89nw3dyfwelfekoc39inlott25u4jq8r
nastyninjaXfzibd3hj2vh55t2ulhiz1k4s6p

Shared By nastyninja

Demonoid Invitations For November-2010

noreply@blogger.com (Blogger) — Tue, 23 Nov 2010 03:54:00 +0000

nastyninjaXlv7i54xtvi8m8k8hhmcaup5l53i4d3avye
nastyninjaXtikzk3jd3ho866620hak9xy8b5oz
nastyninjaXa779ie2b2mpf6m0pktrjtkiexr9lb652ss
nastyninjaXpl98r6dzp6p20s7z69eok6m0vjkmlsueht
nastyninjaXodz8q0lh6xcei5zhfszdtazh6lg39v2j2y

Shared By nastyninja

Demonoid is open for October 2010

noreply@blogger.com (Blogger) — Sat, 02 Oct 2010 03:57:00 +0000

Demonoid opened public registration for the month of October 2010.

Click here to register - http://www.demonoid.com/register.php

How to Save VLC Player Equalizer Settings

noreply@blogger.com (Blogger) — Mon, 06 Sep 2010 08:43:00 +0000

Basic Method:

Run VLC Player in skinned mode.

Play any media, turn on equalizer and adjust equalizer as you desired.

Close equalizer Close VLC Player (Skinned Mode) now your equalizer setting must be saved.

Now, open VLC in normal mode and see the equalizer settings. Be amazed, settings are in a exact position as you set it earlier.

The settings will remain saved as much as you restart VLC.

Advanced Method:

VLC is the most preferred media player catering advanced users and amateurs alike. Configuring basic settings and options are easy but diving deep into customizing and tweaking its features is rather difficult for novices. Many users have been griping about facing problems in saving equalizer settings. Unfortunately there is no apparent option to quickly save the audio level, specified preset, and especially equalizer settings. In this post we will walk you through step-by-step procedure of saving the equalizer settings.

To begin with, launch VLC and click Show Extended Settings button to bring up EQ settings window. Under Graphic Equalizer tab, click Enable checkbox to enable the equalizer, select a Preset from the given list and start setting the EQ levels as required.

Once you have done setting up the EQ levels, note down the values from left to right (followed by postfix dB) and Preamp value which is also referred as Global gain (present at the left side ). Now close the Adjustments & Effects window and under Tool menu, click Preferences.

From bottom-left corner, enable All option to view advanced options of each category. From main navigation bar, expand Audio and then Filters category to select Equalizer. It will show you equalizer settings in the main window. Now in Bands gain input field, enter values (must be separated with single space) which you’ve noted down (excluding the db postfix) and in Global gain input field enter preamp value. You can also specify preset if needed. Once you have entered all values in required fields, click Save to save the EQ settings.

Now upon launching VLC again, EQ bars will remain unchanged and you can enjoy your favorite media without hassling with setting equalizer over & over again.

We have demonstrated this trick using latest VLC 1.1.4 release.

Snipping tool for XP?

noreply@blogger.com (Blogger) — Sat, 07 Aug 2010 06:48:00 +0000

Windows Vista and Windows 7 users are very familiar with the Snipping tool.

This tool is not a part of an operating system for the previous Windows OS like XP.

XP user who want this tool badly, can use the “Screen Clipping Tool” if they installed “One Note from Microsoft’s Office 2007”. Shortcut is “Windows key + S”

Or alternately can also use third party Snipping tool like “Snippy”

You can download this free from http://www.bhelpuri.net/Snippy/Snippy.exe.

What happened to rapidtamil.com?

noreply@blogger.com (Blogger) — Fri, 06 Aug 2010 10:57:00 +0000

www.RapidTamil.com

This is a heaven for all South Indian movie fans who wants to download movies, music, games, TV Serials etc. from online.

It provides Rapidshare links for the searched string.

This site is down today and the reason is unknown!

While entering the site its main page simply says “We will be back shortly :)”

And its sub pages says

Not Found

The requested URL /viewtopic.php was not found on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at rapidtamil.com Port 80

All of it’s fans were disappointed due to this. Do you one of him/her? let come to discuss. leave your comment to discuss more.

Demonoid Invitation Codes – August 2010

noreply@blogger.com (Blogger) — Wed, 04 Aug 2010 07:51:00 +0000

killyoudead999X7u8p436c7alyhc986d92wtdexjzd
killyoudead999Xjnnogpjaha4g3fo7jzehn4jnkbn8aw
killyoudead999X7xznxqut5g95azapdntx30yrjkiid0
killyoudead999Xh18k2puop641yqb32uyv7j6dqdl52g
killyoudead999Xpergw288d1aorsa6xcgxl56whvglg4
chester0607X1kbxvj0i9ja4midv4bld4gqmuk
chester0607Xeq1f0cp33mh8toh47y5ugfwqxrd0j6
chester0607Xzj4lx90s4ctjbh49v85qpx50hyxbeaq97
chester0607Xdaf36m8g1r3rjhz0mnjha5hhrca32jy1f
chester0607Xtt1eknnsjc73xrxmu28wmnijemljcc1h0
nrwks5sec6qhzjhd8000w5ocvmg28mvwn835l9
v2b9zlfgi74aaijl58iqj2fu4zy54uha9kz6q1v
y7rbnj2ywa760hhwg5hxjuymnoku18jk2szk
y46gl83rlf13abb7y1kucyn8e1la6akxes311mgjqus
w3v13422kby30tgx4mzvr2knx3j65sa01hbqw8o
bigjpo1qfwyfieqwfuxz0tj2wxg0cwka0lm2
31772dxcysi8tmfksd8yns0b112dxx9j60jce0qazlo
ptmzroytscs4eboln1h5wrtck0yf6oql7smawn0ns

These codes were shared by our Yahoo! groups member micro.worker1 all credits goes to him/her.

Do not forget to leave your thanks as comment.

For the visitors, whom came here late and dissappoint to get a code, please do not panic and leave your request as comment with your e-mail ID, a code will be sent to your e-mail individually.

How to Type Indian Rupee Symbol from your Keyboard on your Computer

noreply@blogger.com (Blogger) — Tue, 20 Jul 2010 08:38:00 +0000

Recently Indian Government released Indian rupee symbol so you need to use Indian Rupee symbol rather than just typing Rs whenever you need to mention Indian currency. Foradian technologies created the Indian rupee font which you can download and install in your Computer.Lets see how to use Indian rupee font to show Indian rupee symbol using your keyboard in your Computer.

Download and install Indian Rupee Font in your Computer

Download Indian Rupee font.rtf to your Computer from Foradian technologies blog and click "save" button to save font to your Computer.

A couple of days ago, an HCL spokesperson had said that the new Indian Rupee symbol will be seen on HCL keyboards within 3-4 months. But still, we, the Indians are so eager to use the Rupee Symbol. We have found a font in foradian blog to help you hit the key left to number 1 and see the symbol on your screen. Download this .ttf
file and copy it to the following location:

C:/Windows/Fonts

How to type Indian Rupee symbol in your computer to show it in Office Applications and in other text editors

1.To type Indian rupee symbol open Ms Word

2Change font from time New Roman to Rupee Foradian select the Font size and click Ok to save changes.

2.Now hit ~ key below Esc button on keyboard to get Indian Rupee symbol in Ms Word ,you have to do similarly in Notepad also.

How to Disable/Enable the Windows XP Welcome Screen?

noreply@blogger.com (Blogger) — Tue, 20 Jul 2010 08:08:00 +0000

Windows XP gives the user a couple ways to log into the computer. You can use the traditional or classic method of typing in the username and password to login or you can use what's called the Welcome Screen to login.

What if you want to change the way your computer logs in, can you disable or enable this Welcome Screen?

The Windows XP Welcome Screen is tied to another feature called "Fast User Switching". This feature lets a user leave all his programs running if another user needs to use the computer. The first user can Log Off the session and Switch User back to the Welcome Screen so that another person can use the computer. When the second person is done, the user can switch back to his profile with all the programs still running where they left off. In order to use this feature, you have to use the Welcome Screen. However, if you dont need or want this feature, follow the instructions below to remove the Welcome Screen.

Remove the Welcome Screen

If you dont want to use "Fast User Switching", you may want to disable the Welcome Screen. You must be logged in as an Administrator to do this. Note:To do this follow the directions below:

1) Click on Start
2) Click on Control Panel
3) Double-click on User Accounts
4) Click on "Change the way users log on or off"
5) Uncheck "Use the Welcome Screen" (note: this will also disable "Fast User Switching")
6) Click on Apply Options
7) Close the User Accounts window and the Control Panel
8) The next time you reboot your computer, the classic login prompt will be used

What if I dont want the Welcome Screen OR the classic prompt? Can I disable both? (Auto Login)

To Login automatically to a user account, follow the instructions below:

1) Click on Run
2) Type in the following command and click OK

control userpasswords2

3) Highlight the user you want to log into automatically, then uncheck the box for

"Users must enter a username and password to use this computer"

4) Click on Apply and you'll be asked to verify the username and password to log in automatically
5) Click OK and the next time you restart your computer, you'll automatically be logged in without having the classic prompt or Welcome Screen.

How To Downgrade Groove 2010 Back To 2007

noreply@blogger.com (Blogger) — Tue, 13 Jul 2010 15:21:00 +0000

If you receiving error like….

"Unable to downgrade data from version 13,0,0,0 to 12,4,0,0'
HRESULT: 0x80004005
Process: GROOVE.EXE (ID:5652 (0x00001614))
Thread ID: 5212 (0x0000145c)
Date: Thursday, July 13,2010 8:20:10 PM"

Simply follow the steps below.

Start -> Run and type "regedit"

Locate for "HKEY_CURRENT_USER / Software / Microsoft / Office" and delete the folder "14" (Denotes the version of Office 2010)

And

Just delete that entire folder ("Groove"). The names may be slightly different, like "AppData."

C:\Documents and Settings\<windows user>\Local Settings\Application
Data\Microsoft\OFFICE\Groove

Note: The folder "Local Settings" may hidden you should enable the hidden folder view to find the above folder. Restart not required

Demonoid – Current Status July - 2010

noreply@blogger.com (Blogger) — Thu, 08 Jul 2010 10:45:00 +0000

Maintenance We are performing a hardware upgrade, the site will return as soon as possible.

This is the current status of demonoid.com – The torrent search portal.

Demonoid Is Down Again – April 2010

noreply@blogger.com (Blogger) — Wed, 28 Apr 2010 04:01:00 +0000

Demonoid is down again today, none can access the site and also it’s not giving any error message such as “HTTP 500 Internal Server Error”.

Error Messages From Browsers:

Internet Explorer 8 - Internet Explorer cannot display the webpage
FireFox 3 – Server Not Found
Google Chrome 4 - Oops! Google Chrome could not find www.demonoid.com

Also cannot able to reach Demonoid through Proxy Servers of different Countries.

Please leave your comments to discuss about this.