blog pribadi

Show Images in Screensaver

2009-05-19T07:54:00.000+07:00

Do not leave your family photo collection still in the hard disk. If you do not have any time to open it, ordered a computer for displaying time. Especially when computers are idle, with the help of screensaver.

In this way, you can be temperamental back again to see old photos. You may be surprised to see the photos because the moment that appears not infer that you have the documentation.

Lho many applications that can help you create a screensaver from the collections of photos. One of them is Free gPhotoShow that can be downloaded from the address www.gphotoshow.com / gpshow_free.htm. This application can run on Windows 95/98/NT 4.0/2000/XP/Vista. Download the installer file, install, and run before following these steps.

1. Run the application by clicking the [Start]> [All programs]> [gPhotoShow]> [Configure gPhotoShow]. The first stage is to set this application to display your photo collection. In the Display Properties box that appears, click [Settings].

2. GPhotoShow on the Screen Saver box that appears, on the tab [Images], double-click the line labeled "C:-Program Files-gPhotoShow" in the "Image Files" to appear on the button [...] right. Click the button to display the box "Browse for Folder". Find and select the folder containing the images would show in the screensaver.

3. You can add a folder of photos with other double-click on the second line after the line containing the root folder of photos that you choose before. Click the [Count] to see the number of images in each folder. You can set the time delay or pause menu antarfoto in "Speed" in a matter of seconds. Time of transition or change antarfoto can be arranged in the "Transition Speed".

4. If you set the picture is complete, click on the tab [Image Options]. Check [Randomly Choose images] if you want to display images randomly. Make sure you mencentangi [Enlarge small images to the screen size] and [big images to Reduce screen size] so that images appear in full screen.

5. Select the desired type of transition in the key [Transitions ...]. Uncheck the option not to effect the transition would be used. If you do not want to use all the transition effects, just check the option [Disable transition effects].

6. Specify the action to stop the screensaver tab in the [Advanced Options]. Here, also check the option to control your slideshow images that appear on the screensaver. Add song format MIDI, WAV, MP3, WMA or in the slideshow by clicking the [Sounds]. Is the same as the process of adding photos. If everything is set, click [OK].

7. To test the slideshow, you can click the button [Preview] dialog box on the "Display Properties". Another way is by clicking the [Start]> [All programs]> [gPhotoShow]> [Start gPhotoShow]. See if slideshow is running well. If too fast or there is a transition that is less good, set it again by clicking the button [Settings] on the "Display Properties".

8. To activate the screensaver this photo, make sure that [gPhotoShow] has been selected in the "Screen saver" in the "Display Properties". Determine the duration of idle computer screensaver to activate the menu on the "Wait" in a matter of minutes. If you have, enable by clicking the [Apply] [OK]. Now, the photo slideshow memories akan computer running when not being used.

Optimize E-mail HTML Form

2009-05-18T07:52:00.000+07:00

To keep the size of e-mail not too swell, Outlook 2007 has added features to reduce the size of e-mail automatically. Technique is to remove some of the tag information that is not influential in the display settings for e-mail. With this technique, you can send an e-mail format HTML with the relatively small size and bandwidth sparingly.

To optimize the e-mail format HTML, do this step.
1. Run Microsoft Outlook via the [Start]> [All Programs]> [Microsoft Office] [Microsoft Office Outlook 2007].
2. Click [Tools]> [Options ...] in the main Outlook 2007 window.
3. Momentarily and then the dialog box "Options" will open. Click on the tab [Mail Format] which is in this dialog box.
4. In the HTML format, check the options in front of the [Reduce the file size of the message by removing formatting information that is not necessary to display the e-mail message].
5. Press [OK] to save the changes.

Easy ways For Backing Up E-mail

2009-05-17T07:41:00.001+07:00

Due to various reasons, you need to do a back-up e-mail. One of the reasons for memory back-up e-mail is when you want to re-install Windows or anticipate that the computer suddenly broke down at work.

To make preventive action, follow these steps:
1. Open Microsoft Outlook.
2. Click the [File], then click [Import and Export ...].
3. Dialog box on the Import and Export Wizard select [Export to a file] and click [Next].
4. Select the [Personal Folder File (. PST)], then click [Next].
5. Select the folder you want to back-up. If you want the card-back-up all the folders, select the Personal Folder and select the checkbox Include Subfolders, and then click [Next].
6. Specify the file name and folder where the back-up will be saved, then click [Finish].
7. If you want the result file back-up or secure your e-mail that you will back-up e-mail is important, give the password file. Do not forget to select the option [Compressibe Encryption], and then click [OK].

Well, a day later if you need a return e-mail, e-mail that has been in the back-up to Microsoft Outlook, you can try the following steps:
1 into Microsoft Outlook.
2 Click the [File], then click [Import and Export ...].
3 In the dialog box Import and Export Wizard select [Import from another program or file] and click [Next].
4 Select [Personal Folder File (. PST)], then click [Next].
5 Specify the file name and folder where the file back-up saved you, then click [Next].
6 Specify the folder in which you will place the imported file, and click [Finish].

Insert Picture into Text

2009-05-16T16:25:00.000+07:00

Sometimes one or more object of the picture was enclosed as the illustration in the production of the document. In the condition for the standard, the picture that was put into the document will form the part personally so as to be separated from the text. If you put the picture that was not so wide, then would many not exploited empty areas. The empty area could be filled up with the text. You could use facilities wrapping to arrange the layout of the picture so that the position of the picture is more exact and is good to be gazed at. This facilities instruction was as follows:
1. Open Microsoft Word.
2. The clique [File] > [Open] to be opened file the document that will be united with the picture.
3. Picture input that will be processed by means of mengklik tab [Insert] afterwards the clique of the switch [Picture] that was met to the Illustrations box.
4. Choose the picture that was wanted by you, afterwards [Insert].
5. After the picture entered the document, you could enlarge or reduce this picture in accordance with the wish.
6. Now, the clique of this picture afterwards the clique of the switch [Text Wrapping] that was met to the box [Arrange] in tab [the Format].

Protected Word with Password

2009-05-15T16:17:00.000+07:00

If your computer was used in a crowd by many people, you must protect the application that might not be used by everyone. Nah, there was the simple method so that the other person could not use the Word application in any way. We could make an application where when someone wanted to use their Microsoft Word application must put one password that was determined by us. His method like this:
1. Open the Microsoft Word Anda application, afterwards chose tab [View].
2. To the tape beneath it, the clique of the switch [Macros].
3. After emerging the window “Macros”, the contents “Macro name” by the name of “AutoNew”. Must be paid attention to, the macro name must be kept by the name of “AutoNew”.
4. The clique [Create] to begin made macro.
5. Further, will emerge the window of Microsoft Visual Basic the editor. To this window, ketikkan the script below this.

Pass = InputBox ("Put password you. ")
If pass = the "secret of" Then
End
Else " MsgBox (Password that was put by you were wrong. )
ActiveDocument.Close
End If

To the script above, you could replace “secret” with password that would you want.Save your macro afterwards closed the Microsoft Word application. Now, for shortcut Microsoft Word just by means of click right mouse in desktop and chose the menu [New] > [Shortcut]. The contents “Type the location of the item” with "C:-Program Files-Microsoft Office-Office12-WINWORD.EXE"/n, afterwards the clique [Next]. Isikan “Type a name for this Shortcut” by the name of “Microsoft Office Word 2007”. Removed shortcut available in the menu start, afterwards moved shortcut that just you for to the Start menu, replaced shortcut that was original. After that closed the Microsoft application word. From now on when someone wanted to use Microsoft Word and to make the document new, emerged the box that ask for password.

Arrange Auto Recover

2009-05-14T15:54:00.001+07:00

Can you imagine, sometime you typed a document with Microsoft Word. This document was very important and the number of pages that was typed by you then already a large number of. However suddenly electricity in your place was out, in fact the document that has been typed by you earlier was not yet kept completely. As a result, you will lose this document. Some people avoided ‘tragedi’ that with kept file sesering possibly. However apart from troublesome, the method was really impractical. To overcome him you could make so that Microsoft Word automatically keeps your document every few minutes. Like this his method:
1. Undertake Microsoft Word, afterwards the clique of the menu [File] > [Word Options... ].
2. To the box of the Options dialogue, the clique of the menu [Save].
3. Marked checkbox [Save AutoRecover information every].
4. To the box before minutes, isikan the figure that interpreted how many minutes very much this document will automatically be kept.
5. Aim the location file results recover to your document folder by defining his address in the part AutoRecover file location.
6. As the step pengaman in addition, the clique checkbox [Always create back up copy] that was met in the Save part in the menu [Advanced].
7. If already, the clique [OK] to close window Options.

Now, your document will automatically be kept in accordance with setting that you for.

Manage Facebook's Desktop

2009-05-13T16:40:00.000+07:00

You surely know Facebook. Social networking sites or sites perkawanan are increasingly popular course. His access to the more diverse (from PC to gadgets such as a BlackBerry) and features a variety of management and the reason why the site was built by Mark Zuckerberg in February 2004 is the more familiar course.

In fact, initially, this web site network membership is limited to students of Harvard College course. Furthermore, expanded to other universities in the Boston area, United States, to other parts of the country and around the world.

So any management. If you can only access the networking site by visiting its Web site through your internet browser, but now a number of applications-whether in the form of independent software, and plug-in can be used to monitor the progress of your account at the web site is nuanced blue.

Not only via the Browser
Most of the software support for the Facebook function provides notification that a new development in your account, such as the existence of private messages & wall-to-wall a new, up and Poke friend request. There are also applications that enable you can directly approve friend requests and respond to every message without having to create an account in the browser.

As mentioned above, this Facebook application to support the general two, the single application and additional applications (plug-in or add-on). Applications that support a single management, among others, Facebook is Facebook Desktop 1 (www.ericzhang.com), Facebook Gadget 1 (www.turhanaydin.eu / gadgets), 8hands 0.9.135 (www.8hands.com), FizzBoost for Facebook 2.0 (www . gamaroff.org), Fosimo (www.x2line.com), Sociagami 1.0.17 (www.sociagami.com), chat to the manager application in Facebook, Digsby Build 45 (www.digsby.com).

If you like using Yahoo! Widgets mendayagunakan to-desktop application so that it can ditambahi variety of widgets or mini-applications try searching for a number of widgets for Facebook to manage.

The two widgets we found in the authorized source download (http://widgets.yahoo.com) is a Facebook Notifier and Facebook Update Status. If you still want to keep control over your browser, try adding a number of add-on support if you use Firefox as a browsing tool.

Many add-on related to Facebook at: https: / / addons.mozilla.org. There is a facility to process the image, such as the Facebook Photo Album Downloader and FacePAD: Facebook Photo Album Downloader. There is also a special set for the video, the Facebook Video.

Other, only a HugBack for Facebook, Facebook Toolbar, Pink Facebook, Notre Dame Facebook Style, Boost for Facebook, Facebar, and Who Is This Person? The latter is useful for people looking for information on the internet, including with the Facebook.

No loss to install it all, although it must add energy to install it. For the management of Facebook will be more practical. This may mean you do not need to go back and forth to work from a document to the browser, only to melongok account. Simply view the notification or development of new applications that are installed on one desktop.

Manage with Fosimo
1. Download the installer file from the site www.download.com Fosimo or authorized site. Double-click the file appear to bar the installation process. Wait until complete, then run. First akan Facebook Login box appears. Fill in your username and its password, then click [Login].

2. In the next box that appears, click [Allow]. Now the application is active, the icon is marked with the emergence of the orange letters containing F in the system tray (bottom right corner of the screen). Right-click the icon, and select the options that are available. To monitor the status of a friend, click [Check's Friend].

3. Next, the panel will appear containing the status of your friends in some of the screen. You can also view your own profile option with the click [My Profile]. Window containing this data can be utilized to change your Facebook status by typing something in the text box. Click [OK].

4. Munculkan your friends list with the options click [My Friend]. In the Profile List box, you can see all the name of a friend. If you click one of the name, then click [View], your friend's profile will appear.

5. Mengunggah want the image to account? Easy course. Click the option [Upload Photos]. In the dialog box that appears, click [Choose File to Upload] and select the image you want displayed, and click [Open]. Select a photo album that you want from the drop-down menu, "Photo Album". If you want to create a new album, the contents of the "Create New Album".

NOTES
Fosimo requires at least Windows XP / Vista, 256MB RAM, 1GB hard drive, 2.0 Net Framework 3.0, Internet connection. Installer file size is 628KB, and can be downloaded at www.download.com or www.x2line.com.

Hide Personal Information

2009-05-12T16:39:00.000+07:00

Try to open your Windows Explorer, then find one of the documents created with Microsoft Word you have. Note on the Status Bar, there is a information about the creator of the document. Now right-click the file, then click [Properties]. When the Properties window opens, click the tab [Summary] and see the Author:, there is also the name of the document.

For some people the information may be enough with the earlier document. Nah, you can be removed.

Here's how:
1. Run the program Microsoft Word.
2. Press the Microsoft Office, and then select the [Prepare]> [Inspect Documents].
3. Inspect Document in the window, give the check in front of the [Document Properties and Personal Information].
4. Click the Inspect button to start the examination. If you save the file indicated data private, you can be removed immediately by clicking the button [Remove All].
5. Finally, click [Close] to close the window Inspect Document.

Key Document Format

2009-05-11T16:38:00.000+07:00

On Microsoft Word 2007, there is a feature that allows you to lock in the format of a document. That is, if you enable this feature in the document belong to you, whoever does not will be able to provide the format - whether it is bold, italic, underline, or change the font type and size - if it does not know its password.

The formatting is also true that "reader" can not add any style to the document and can not change the color. Keyboard shortcut to do the formatting, such as the keys [Ctrl] + [B], [Ctrl] + [I] and the like also disabled.

Interested to apply this trick on your PC? Follow the steps below:
1. Run Microsoft Word and open the document you want to protect the format via the menu [File]> [Open].
2. After the document opens, click [Review] [Protect Document]> [Restrict Formatting and Editing].
3. In the right window will appear Task Pane Restrict Formatting and Editing. Checkbox in the [Limit formatting a selection of styles]. This way there will not be any people who can change the settings in the format of your documents.
4. To apply the changes you made, click the button [Yes, Start Enforcing Protection].
5. After you click the button, will display a dialog box that asks you to enter a password. Password can be used later to turn off the formatting again.

Well, now your document has been safe from the hands of cruel destructive format document that you have created. To enable the protection again, click [Review] [Protect Document]> [Restrict Formatting and Editing]> [Stop Protection] and enter the password that you specified on the command line.

Bad Sector on the Hard Disk

2009-05-10T16:37:00.000+07:00

When a, a colleague to check the condition of a hard disk with a software. He felt the hard disk is less wrong. In fact, allegations is true. Test results of the software states that there is a certain sector or part of the damaged hard disk (bad sector), and the damage is concerned. Software that is to tell if he should be ready to replace the hard disk crash occurred because the possibility is very great.

Wow, Is it peer pcplus replace hard disk? What has not improved?

Suggestions pcplus, it's good try refining your hard disk first. Who knows still be able to work again. His most of the hard disk that is now circulating this sector have a backup, that is for conditions like this. If you can take advantage of the backup, you can delay the purchase of new hard disk.

If you use Windows XP, run the MS-DOS Prompt. Type the command "chkdsk / R" and press [Enter]. The command that will make Windows search for the position of bad sector and restore the data or information which can still be read.

Who knows you still use Windows 95, Windows 98, Windows Millennium, or, try to use Scandisk default operating system that has the option to make improvements to scanning all sober.

Searched action is how fast you can do if you suspect your hard disk has bad sectors. If you do not succeed before, try this way.

Use Utilities
You can use peranti capable of logic and fix bad sectors. Origins know, bad sector is divided so two: logic and Physic. Peranti the hard disk to work again with "remove" bad sector it.

Hard disk dipaketkan usually with a software for management functions as well as repairs. For example, Quantum and Maxtor MaxBlast have, have ClearHDD Samsung, Seagate Seagate have a format, have a Western Digital Old DLG Diagnostic, and have a Fujitsu FJ-IDE Drive Initializer Utility.

You must not use software Paketan. You can also use peranti others. Repair hard disk described in this article use SpinRite (www.grc.com). Software made Gibson Research is good enough for overcoming bad sector on your hard disk. The latest version of this software version 6.0 for 89-U.S. dollars.

SpinRite supports FAT, NTFS, Linux, Novell, drive with some operating systems and hard disk is not formatted. How to use it easily. Live follow these steps.

1. Create a diskette or CD that can boot. Forged it in the SpinRite. Click [Create Boot Diskette], [or Create ISO Image File], or [SpinRite on Install Drive]. so much easier, select make bootable CD. Origin, and only run in the SpinRite DOS mode.

2. After the image file is so, use a CD burner software, such as Nero Burning ROM, to make a CD. Restart the computer and boot with the CD Searched made.

3. SpinRite have 5 or option level. Level that you most likely need is a level 2 or level 4. Action on level 2 is the return data, while level 4 is the maintenance and analysis of the drive. Just select the action you want to do.

4. Any level you choose, you will be prompted to select the drive or partition you want to check or correct. After that, change options, or see how SpinRite to check your hard disk. If you are, continue with the next step, namely to test the performance of the drive.

Examination process can run several hours, depending on capacity and speed of the hard disk. According to information from the author, SpinRite is a maximum speed of 120 GB per hour.

However, many things that affect the speed of inspection, such as damage to the hard disk, support Ultra DMA, or system configuration. Fortunately, you can stop the examination process to proceed in the future. So that does not need to repeat, record the position of the examination only when you stop the process.

If SpinRite to detect the need for improvement, SpinRite will work directly in the Level 4 to repair and restore data. Level 4 return does not take a moment. Can count time in hours and even days, again depending on the damage.

SpinRite have the screen saver is active when SpinRite is running. You can also show the way the process is in progress. If your hard disk supports temperature reading features, SpinRite will report the information on hard disk temperature. Hard disk temperature will continue to rise while SpinRite improve your data.

When working, SpinRite also have the option to see more closely the process of ongoing improvement. Option name is "DynaStat Data Recovery."

If the hard disk is still damaged after repaired with software such as SpinRite, perhaps it is time to replace your new hard disk.

Java-based Multimedia Player

2009-05-09T16:36:00.000+07:00

The advanced features of the phone at this time not only dominated by mobile-phone top-class. Multimedia facilities, such as camera, radio, music player up, already in the phone dibenamkan to middle-class down.

However not all have full facilities. There are shortages there, in here, even though the phone was bought for a new laptop. Does not close the possibility, that there are weaknesses in the mobile phone class on the mobile phone is available in low-end. Basically, the price of the phone will not necessarily ensure completeness facilities. Determine the application that is installed on one phone.

Maji Player is one of the multimedia applications that try to bridge the problem. With the support of music and video in one application, Maji Player (maji player.jar, 372KB; http://majimob.com/majimo/download.html) promises a fun multimedia experience with a variety of devices. Practical does not have special requirements to run this application unless the Java 2 support on the phone and of course the screen resolution is sufficient to display color images.

Almost All Format
In terms of features, Maji player supports all multimedia file format that is common to use the phone today. So no need to worry with format-a format such as 3GP or MP3, are all certainly supported.

If accidental multimedia files on your mobile phone number quite a lot, do not worry akan bothered to import files from a standard media player of your phone to Maji player. This application can automatically "catch" all multimedia content stored on the phone and then you can directly manage the program's interface.

Similar to Windows Media Player in Windows, Maji Player can also handle ID3 and ID3v2 tags that can be filled with information about the song your own, complete with album cover. Still the same as the Windows Media Player, Maji player can also automatically create playlists based on artist or album penyanyinya.

Although not too much text in the inter-face program, but Maji player has a simple and intuitive to use. Icon-icon that can be used directly identified by its function without reading the user guide.

Views digonta interface can also be varied according to taste and mood. Simply visit http://majimob.com/MajiServer/themes.jsp, select majimob, and select the theme you like and copy it to your phone to install it. You can also mengunduhnya directly from the menu on the More Settings page application.

Good news for PDA users, this application also supports the touch screen. This means, you can also maximize the application on a mobile phone or PDA touch screen without having to press the phone key pad manually.

The most interesting, from Maji Player version 1.1 support for the lyrics to be included in the application. When you request the lyrics, Maji Player akan lyrdb.com to connect themselves to find the lyrics to the song you want. If the lyrics could not be found, the application will try to import the words found in the songs and make liriknya for you. Indeed, the results of making the lyrics "imitation" can not be 100% reliable. However, at least, you will terbantu than make the lyrics manually. How the second alternative if the above is unsatisfactory, you can download lyrics from the Internet manually.

One bad news for you: this application is not free. You must pay the U.S. $ 4 if you want to use MajiPlayer fully without interference. But do not worry, the basic features Maji Player can still be used permanently for free, although you should see the ad in it.

Send Multimedia Content from the Web to HandPhone

2009-05-08T16:35:00.000+07:00

Since the beginning of the Millennium, many available Web-based SMS service. This service enables Internet users to send SMS from Web pages to mobile phone number. Practical and (generally) free.

However, in line with the development of technology, SMS technology to become "stale". You can not send a picture, song or video with SMS. Text-only, and that is not more than once per 160 characters tell.

MMS technology to be capable of sending SMS which antarponsel multimedia content. With the restrictions 50KB per message, you can more freely to each multimedia content. Unfortunately, although it is more than six years was introduced, until this time there is no Web-based service that offers MMS to a mobile phone.

However the situation, do not despair. Try this one application: Zip Clip. Zip Clip is not an MMS from the PC to the phone. Zip Clip is a free application that is capable of combining Web services with mobile phone technology. Zip Clip able to capture objects that have multimedia on the Web and send them to the phone.

Zip Clip work with how to install the application on two sides: in the browser on the PC and mobile phone. After the second application ter-install, you simply select the content of the Web - video, text, images, photos, animation, thumbnail, avatar, text or music - and send direct to your mobile phone is available through the menu. Next, the content Searched tell you that the application can be viewed through the Zip Clip in the mobile phone. Similar to MMS right?

Installation & Use
To install Zip Clip, first visit the first site www.zipclip.com. After that, click the Get it now and enter the phone number, e-mail, password and account Zip Clip on the form provided. Click the Create my account to create an account. Once registered, you will be prompted to download software Zip Clip [zipclip.jar (phone) & zipclip.exe (PC); 182KB] designed for the PC browser to function as a sender akan content. Follow the request.

At the same time, after signing up to the Zip Clip, you receive the SMS containing the link to download the Zip Clip phone. Follow the link. For those who do not get SMS, and download it manually by visiting the http://m.zipclip.com from mobile phone browser, log in with the phone number and password that are registered earlier, the menu and select Download.

Zip Clip after the ter-install the browser on your computer and your phone, browse the Web via a PC as usual. Make sure you use Internet Explorer 7 or Firefox 2 Zip Clip that can work well. When you find something interesting to be sent to the phone, do the following:
• For a picture or photo: place the cursor on the image, then right-click.
• For video: place the cursor on an empty area after the video image and right click.
• For the text: the text block you want to tell, and right click.
• For voice and music content, place the cursor on the link that lead to audio files, and click the right link.

In the browser context menu will appear offering several options. Use the options Send to my phone to send selected content to your phone, or select Send to friends to send to your friends. Before selecting this option, make sure you have added the name of friends to "friends list" in the View menu my stuff.

Options Send to ringtone maker that is in the context menu can be used to create a ringtone from a video clip. Twenty-first-second audio clip from the video selected will be sent to your phone if you choose this option.

Later, in the mobile phone you will get the option to View, Download, Info, Delete, and Refresh. View option allows you to display or play multimedia content. While the Download option is used if you want to download content that has been sent to your account. Before the download, you can see the details that will be downloadable content on the Info menu. If you do not like it, you can delete it by selecting Delete.

It's Multimedia Studio
Zip Clip not only functions as the multimedia content. Account in the Zip Clip found a kind of "Studio" which can be used to process multimedia content that will be sent.

Very easy to use. You simply enter a link or URL of the video, image or photo to the studio in my stuff the View menu, click Customize. Web new window will open and can be used to change the size or crop the image. If the image is perceived fit, click Send to send it.

Print to a Printer Style

2009-05-07T16:34:00.000+07:00

Each time you print to a printer, you always get the files in the printed neatly. The concept of WYSIWYG (What You See Is What You Get), which was popular in the 80 years-an is always a specialty in Microsoft Word. The result, what you see in the Microsoft Word document on a monitor, that will get you in the printed version.

This concept is a little weak. You are still a little computer with the general public will not be able to directly know the format and style are used in printed documents. To be able to find out you must open the document version and view digital format one by one via Microsoft Word.

The best way to cover this weakness is to print the document and its style information used in the document. This way, you can find out what format is used in a document.

Here are five easy steps to print the document and its information to its style:
1 Click [File]> [Open] and then select the file name to be printed.
2 After the document opens, click the [File]> [Print] [Print].
3 In the Print, Print seek what combo box, and then change into Document Styles option.
Press [OK] to start printing.

Opening Corrupt Documents

2009-05-06T16:32:00.000+07:00

When working with Microsoft Word you may never experience this. Document that you want to access suddenly broken and can not be opened. With conditions like this you will panic. Moreover, if the file is a file important, and there is no back up files to.

Do not lose heart in advance! Files that are damaged may be repaired and can still be improved with the Text Recovery converter. How to use it as follows:
1. Open Microsoft Word, then click [File]> [Open].
2. Select a document file that is damaged.
3. Click the small arrow on the right side of the button [Open].
4. On the drop down menu that opens, select the [Open and Repair].
5. Your file will be broken open again. But please note, this level of success of repair depends on how much damage your files.

Print document sequence

2009-05-05T15:27:00.000+07:00

When you print the document without specifying the page which will be processed, then the Microsoft Word document will print a page from the beginning to the end. This means you must re-sort the documents are printed upside down because when the printing process is ended, terakhirlah page document which is located on the top.

To overcome this, do a little configuration in the Options box to enable option [Reverse print order]. Through the [File], choose the option [Word Options ...] in order to Options window displayed. Look for the [Print] and check the option [Print pages in the order reserve]. Click [OK] to close this box.

Now, with this feature actively, and each time the process of printing a document in progress, Microsoft Word will print the page inverted (reverse), that is until the last page of the home page document.

Installing Windows from USB Flash Disk

2009-05-04T15:22:00.000+07:00

The idea of this article begins when you want to install Windows on the nettop Telebit Nucleom AG-100. Due to nettop does not have a CD-ROM, InfoKomputer must use an external CD-ROM. Then thought, what if the installation process using a flash? Solution is clearly more practical and inexpensive, because we do not have to buy an external CD-ROM and using the live USB flash disk that price is more affordable.

However, to do this, we can not just put the files from the Windows installer CD to flash disk. We have to make is known as flash bootdisk first. One thing that the BIOS is also crucial in the notebook / netbook / PC we will install should support booting through the flash disk. In fact nearly all the new products already support it, but we suggest you check the BIOS of your PC first.

If you can, the following is a list of completeness you need.
1. A PC with a CD-ROM (for the process of preparation and file transfer)
2. Windows XP installer CD or Vista
3. Application support form (available in three DVD editions InfoKomputer February):
a. USB_PREP8
b. PeToUSB
c. Bootsect.exe
4. Flash disk with a capacity of at least 1GB

Here's how to enter in to the Windows installer flash disk.

1. PeToUSB.exe to copy the files in the folder USB_prep8.

2. Run the file usb_prep8.cmd with the double click. The file is located in the folder USB_Prep8. Note: If your PC using Windows XP2, you need to unblock the file to be run. How, right-click> Properties> Unblock

3. Later file a window will appear like the picture below.

4. Press Enter, and a window will appear.

5. Leave all the settings in the default (unless you want to change the drive label) and press Start. This akan menformat your flash disk, so make sure no important files on the flash disk.

6. Once the process is completed, DO NOT close the window PeToUSB. Leave it open.

7. Open the command prompt (caranye click Start> Run> cmd). At the command prompt panel, go to the folder where the file is saved bootsect.exe. Way, type "cd namafolder". For example, because bootsect.exe files in the folder bootsect located on the desktop, we type "cd desktop" and then "cd bootsect" (both without quotes).

8. If bootsect.exe already met, type "bootsect.exe / nt52 X:" (without quotation marks). Note: X: drive to show your flash disk, so first find out the name of the drive. On our case, the name of L so that the drive is the command to "bootsect.exe / nt52 L:"

9. If step 9 is done correctly, a message will appear "Bootcode was successfully updated on all Targeted volumes." Close the window and command window PeToUSB. note: do not close the window USB_Prep8. USB_Prep8 window should remain open.

10. When you close the window PeToUSB, USB_Prep8 in the window will automatically appear as menu options under the picture. If not, try and press Enter.

11. At this stage, you actually just do the settings for Prep8, free way is to select the menu based on the number. You must change are:
a. Menu 1: select the drive where Windows XP (or your CD-ROM). I click on 1, will be out later Explorer to select the drive. Select the name of the drive (the PC is C).
b. Menu 2: Virtual TempDrive choose, or a virtual drive in your PC hard drive as a place to store data (before moved to the flash disk). Select the drive that is not in your PC, eg drive T.
c. Menu 3: to choose your flash disk drive. Press 3 and select the flash disk drive that you want to enter Windows.
d. Menu 4: the menu to run the next process. If you have run the 1 to 3, you immediately run this menu 4.

12. Nanti akan pop-up window that will immediately delete the temporary drive (which we do in the menu 2). Press Yes.

13. After that, the file transfer process to run the Windows installer. There are two processes going on in here. First transfer files from a CD-ROM to hard disk, and the second from the hard disk to flash. The length depends on the speed CD-ROM or flash disknya, and in our case about 30 minutes.

14. After that, we live Plug flash disk to the PC we will install, and set the booting priority to the flash disk. When switched on, there are two options available. Select option number 1 (TXT Mode Setup Windows XP).

After that, the installation process is running as normal, including the process re-booting. No you need to do here, just wait until the installation process is complete. To note is the flash disk can not be revoked until the process is complete (already signed in Windows).

Well, now the Windows installation can be done even though you do not have a CD-ROM. Handy eh?

How to Make Practical New Folder

2009-05-03T15:13:00.000+07:00

How do you create a new folder? The default is surely through the menu or right-click the File menu. Actually quite easy.

But when the context menu we have dijejali a variety of additional applications from the third party, through it with the mouse so making a bit too. The easiest solution to this problem is overcome by using the hotkey.

In fact, if you are charming, the Windows Explorer hotkey is already providing. Although not a key combination that once dipencet can produce, it is also quite fast.

To mengaplikasikannya, first open Windows Explorer window. Then press the [Alt] + [F] to display the File menu. Release pressure on the key [Alt] and press the letter [W] to go directly to the [New], then press the letter [F]. If sorted, [Alt] + [F]> [W]> [F].

Or can also still use the right-click menu, which is then followed by pressing the button [W]> [F] in succession.

Try. If you already use it, you'll probably always use a combination of some of this hotkey.

Pin to Start Menu for Folder

2009-05-02T14:36:00.002+07:00

In fact, Pin to Start Menu appears only when an executable file right-clicked. May already know that many of this command to put a shortcut applications directly related to the Start menu in Microsoft Windows Vista. That many may not know, the command can actually also enabled for the folder.

Want to know how? See below.
1. Run the Registry Editor.
2. Go to the subkey HKEY_CLASSES_ROOT-Folder-shellex-ContextMenuHandlers.
3. Then, create a new key by clicking the right subkey ContextMenuHandlers, followed by selecting the option [New]> [Key].
4. Rename the new key is exactly like this: (a2a9545d-a0c2-42b4-9708-a0b2badd77c8). Let the value is still zero.
5. Close the Registry window.

Now run Windows Explorer. Select a folder, then right-click on the folder while holding down the Shift key. Well, the Pin to Start Menu will appear in the context menu. Click the command to put the folder in the Start menu.

Print more quickly in the Command Prompt

2009-05-01T13:06:00.000+07:00

Operating system Microsoft Windows 2000 is one of the operating system is strong enough for business networks. Therefore, no wonder if many of the corporation that uses this operating system on all computers that are connected to the network.

Not infrequently, a DOS-based program is still in use even though your primary operating system is Windows 2000. Your action is not wrong, because these programs can still work well and fast on the Windows 2000 operating system. However, the printing business for Windows 2000 has a few problems with the program DOS-based program. Response time to do printing rather slow when compared to print documents that are opened by Windows-based application.

Solution of the problems above can you do with the ways:
1. Run Registry Editor by clicking the [Start] and then type regedit.exe.
2. Go to the subkey HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Control-WOW.
3. Look for String Value with the name LPT_timeout, and then click String Value is ganda.
4. Change Value Data to previous bernailai 15 to 3.
5. Click [OK] and close the Registry Editor window. Now, try to print again through the Command Prompt.