All About CCNA Discovery

CCNA4 Discovery Final 4.0

noreply@blogger.com (Bongradz) — Sun, 04 Jan 2009 12:11:00 +0000

1.A company is developing an Internet store for its website. Which protocol should be used to transfer credit card information from customers to the company web server?
FTPS
HTTP
HTTPS
WEP2
TFTP

2
Refer to the exhibit. A new branch office has been added to the corporate network and a new router is to be installed to allow branch office users to access the database server at headquarters. How should the serial 0/0/0 interface of the new branch office router be configured to connect to the headquarters router?
branch_23(config-if)# ip address 192.168.5.19 255.255.255.240
branch_23(config-if)# no shutdown
branch_23(config-if)# encapsulation hdlc
branch_23(config-if)# ip address 192.168.5.25 255.255.255.240
branch_23(config-if)# no shutdown
branch_23(config-if)# encapsulation ppp
branch_23(config-if)# no shutdown
branch_23(config-if)# encapsulation ppp
branch_23(config-if)# ip address 192.168.5.33 255.255.255.240
branch_23(config-if)# encapsulation ppp
branch_23(config-if)# ip address 192.168.5.21 255.255.255.240
branch_23(config-if)# no shutdown

3
Which two commands ensure that any password that permits access to the privileged EXEC mode is not shown in plain text when the configuration files are displayed? (Choose two.)
Router(config)# enable secret cisco
Router(config)# enable cisco
Router(config)# encryption-password all
Router(config)# enable login encrypted
Router(config)# enable password encryption
Router(config)# service password-encryption

4
A new network is to be configured on a router. Which of the following tasks must be completed to configure this interface and implement dynamic IP routing for the new network? (Choose three.)
Select the routing protocol to be configured.
Assign an IP address and subnet mask to the interface.
Update the ip host configuration information with the device name and new interface IP address.
Configure the routing protocol with the new network IP address.
Configure the routing protocol with the new interface IP address and subnet mask.
Configure the routing protocol in use on all other enterprise routers with the new network information.

5
How does TCP ensure the reliable transfer of data?
If data segments are not received from the source, the destination requests that the segments be resent.
If an acknowledgment of the transmitted segments is not received from the destination in a predetermined amount of the time, the source resends the data.
TCP uses the SYN-ACK portion of the three-way handshake to ensure that all data has been received.
The TCP Protocol Interpreter process verifies the transmitted data at source and destination.

6
A network administrator is asked to design a system to allow simultaneous access to the Internet for 250 users. The ISP for this network can only supply five public IPs. What can be used to accomplish this task?
routable translation
dynamic translation
static translation
port address translation

7
What is the most commonly used exterior routing protocol?
BGP
RIP
OSPF
EIGRP

8
Refer to the exhibit. The network administrator needs to configure the router with a name. Which command will the administrator use to configure the router name?
Router# ip hostname Boise
Router# enable hostname Boise
Router(config-line)# name Boise
Router(config)# hostname Boise
Router(config)# ip hostname Boise

9
Why are port numbers included in the TCP header of a segment?
to indicate the correct router interface that should be used to forward a segment
to identify which switch ports should receive or forward the segment
to determine which Layer 3 protocol should be used to encapsulate the data
to enable a receiving host to forward the data to the appropriate application
to allow the receiving host to assemble the packet in the proper order

10
What is the purpose of the routing process?
to encapsulate data that is used to communicate across a network
to select the paths that are used to direct traffic to destination networks
to convert a URL name into an IP address
to provide secure Internet file transfer
to forward traffic on the basis of MAC addresses

11
Which two statements are true about the use of the debug ip rip command on a Cisco router? (Choose two.)
The debug ip rip command displays RIP routing activity in real time.
The debug ip rip command can be issued at the user EXEC configuration mode.
The debug ip rip command displays a combination of the information that is displayed by the show ip route and show ip protocols commands.
Because of router processor usage, the debug ip rip command should be used only when necessary.
The debug ip rip command should be used instead of the show ip route command whenever possible.

12
What minimum configurations must be set on a host to allow a request to be sent to http://www.cisco.com/? (Choose four.)
DNS server
WINS server
IP address
NetBIOS
subnet mask
default gateway

13
A Catalyst 2960 switch has been taken out of storage to be used as a temporary replacement for another switch that needs to be repaired. About a minute after the switch has started, the SYST LED on the front of the switch transitions from blinking green to amber. What is the meaning of the amber SYST LED?
The switch has no configuration file in NVRAM.
The switch has failed POST and must be sent for service.
The switch is functioning properly.
The switch is in half-duplex mode.

14
Refer to the exhibit. Which combination of cables and symbols is correct?
A - crossover, B - straight-through, C - straight-through
A - crossover, B - rollover, C - straight-through
A - straight-through, B -crossover, C - straight-through
A - straight-through, B -straight-through, C - straight-through
A - straight-through, B - straight-through, C - crossover
A - rollover, B - straight-through, C - straight-through

15
After an unsuccessful ping to the local router, the technician decides to investigate the router. The technician observes that the lights and fan on the router are not operational. In which layer of the OSI model is the problem most likely occurring?
transport
network
data link
physical

16
What are three characteristics of the TCP protocol? (Choose three.)
exchanges datagrams unreliably
is used to send IP error messages
forces the retransmission of unacknowledged packets
creates a virtual session between end-user applications
carries the IP address of the destination host in the TCP header
is responsible for breaking messages into segments and reassembling them at their destination

17
Refer to the exhibit. The network shown is connected using services from the same ISP. How will the Fohi router dynamically learn routes to the 192.168.16.16/28, 192.168.16.32/28, and 192.168.16.64/28 subnetworks?
with BGP
with a static route
with a directly connected route
with an interior routing protocol

Refer to the exhibit. Which type of UTP cable should be used to connect Host A to Switch1?
rollover
console
crossover
straight-through

19
When customers use credit cards to make purchases at a small business, a modem is heard dialing a telephone number to transfer the transaction data to the central office. What type of WAN serial connection is in use?
leased line
packet switched
circuit switched
point-to-point

20
A user reports being unable to access the Internet. The help desk technician employs a bottom-up approach to troubleshooting. The technician first has the user check the patch cable connection from the PC to the wall, and then has the user verify that the NIC has a green link light. What will the technician have the user do next?
Enter an IP address into the WWW browser address bar to see if DNS is at fault.
Use traceroute to identify the device along the path to the ISP that may be at fault.
Verify the IP address, subnet, and gateway settings using ipconfig on the PC.
Connect to the user home router to check firewall settings for blocked TCP ports.

21
A ping 192.1.1.20 command is issued on workstation A to determine if workstation B can be reached. What events will occur if this command is successful? (Choose two.)
The router will block the ping request message.
The router will reply to the echo request with a proxy ping response.
Workstation A will send a UDP ping request message to workstation B.
Workstation B will send a UDP ping reply message to workstation A.
Workstation A will send an ICMP echo request message to workstation B.
Workstation B will send an ICMP echo reply message to workstation A.

22
How does a router know of paths to destination networks? (Choose two.)
inspection of the destination IP address in data packets
ARP requests from connected routers
manual configuration of routes
updates from other routers
DHCP information broadcasts
updates from the SMTP management information base

23
Refer to the exhibit. Which two statements describe the data conversation shown? (Choose two.)
The data conversation was started by the HTTP application process running on the client.
The data conversation is identified by TCP port 80 on the client.
The user started the data conversation by sending an e-mail.
The IP address of the Internet server is 192.168.17.43.
The Internet server will send data to port 8547 on the client.

24
What is one purpose of the TCP three-way handshake?
sending echo requests from the source to the destination host to establish the presence of the destination
determining the IP address of the destination host in preparation for data transfer
requesting the destination to transfer a binary file to the source
synchronizing sequence numbers between source and destination in preparation for data transfer

25
Which type of address is 192.168.17.111/28?
host address
network address
broadcast address
multicast address

26
A customer reports connectivity problems to an ISP technician. Upon questioning the customer, the technician discovers that all network applications are functioning except for FTP. What should the technician suspect is the problem?
misconfigured firewall
bad port on switch or hub
misconfigured IP addressing on the customer’s workstation
wrong DNS server configured on the customer’s workstation
wrong default gateway configured on the customer’s workstation

27
The show ip route command was executed on one of the routers shown in the graphic and the following output was displayed:

C 192.168.4.0/24 is directly connected, Serial0/0
R 192.168.5.0/24 [120/1] via 192.168.4.2, 00:00:19, Serial0/0
R 192.168.1.0/24 [120/2] via 192.168.3.1, 00:00:20, Serial0/1
R 192.168.2.0/24 [120/2] via 192.168.3.1, 00:00:20, Serial0/1
C 192.168.3.0/24 is directly connected, Serial0/1

From which router was this command executed?
A
B
C
D

28
Refer to the exhibit. Which two sets of commands are required to configure passwords for all management ports on a Catalyst 2960 switch? (Choose two.)
ALSwitch(config)# interface vlan 1
ALSwitch(config-if)# password cisco
ALSwitch(config-if)# login
ALSwitch(config)# line vty 0 4
ALSwitch(config-line)# password cisco
ALSwitch(config-line)# login
ALSwitch(config)# line vty 0 15
ALSwitch(config-line)# password cisco
ALSwitch(config-line)# login
ALSwitch(config)# enable secret class
ALSwitch(config)# enable password cisco
ALSwitch(config)# interface fa0/1
ALSwitch(config-if)# password cisco
ALSwitch(config-if)# no shutdown
ALSwitch(config)# line cons 0
ALSwitch(config-line)# password cisco
ALSwitch(config-line)# login

29
A user reports being able to access the Internet but not being able to download e-mail from the mail server at the ISP. What should the user check on the user workstation?
the POP3 and SMTP server settings in the e-mail application
the patch cable connections at the back of the workstation and at the wall plate
the DHCP settings in the operating system
the IP address, mask, and default gateway values
the NIC drivers

30
Refer to the graphic. Which command will configure a static route on Router A to direct traffic from LAN A that is destined for LAN C?
RouterA(config)# ip route 192.168.4.0 255.255.255.0 192.168.5.2
RouterA(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2
RouterA(config)# ip route 192.168.5.0 255.255.255.0 192.168.3.2
RouterA(config)# ip route 192.168.3.0 255.255.255.0 192.168.3.1
RouterA(config)# ip route 192.168.3.2 255.255.255.0 192.168.4.0

31
Which subnet masks could be used when subnetting a Class B IP address? (Choose two.)
255.255.255.240
255.255.192.0
255.255.0.0
255.192.0.0
240.0.0.0
255.0.0.0

32
Refer to the exhibit. The network administrator has configured the RTA and RTB interfaces. In order to allow hosts that are attached to RTA to reach the server that is attached to RTB, a static route from RTA to the server LAN and a default route from RTB back to RTA need to be configured. Which two commands will the administrator use to accomplish these tasks on the two routers? (Choose two.)
RTA(config)# ip route 10.16.10.5 255.255.255.252 10.16.10.6
RTA(config)# ip route 0.0.0.0 0.0.0.0 10.16.10.6
RTA(config)# ip route 10.16.10.96 255.255.255.252 10.16.10.6
RTB(config)# ip route 10.16.10.6 255.255.255.248 10.16.10.6
RTB(config)# ip route 0.0.0.0 0.0.0.0 S0/0/1
RTB(config)# ip route 0.0.0.0 0.0.0.0 10.16.10.6

33
How do port filtering and access lists help provide network security?
They prevent specified types of traffic from reaching specified network destinations.
They alert network administrators to various type of denial of service attacks as they occur.
They prevent viruses, worms, and Trojans from infecting host computers and servers.
They enable encryption and authentication of confidential data communications.

34
Refer to the exhibit. The network administrator of the building in the graphic needs to choose the type of cable best suited to add ServerB to the network. Which cable type is the best choice?
STP
UTP
coaxial
fiber optic

35
What is used by a routing protocol to determine the best path to include in the routing table?
Convergence time
Default distance
Metric
Type of router

36
Refer to the exhibit. Which IP addresses could be assigned to the hosts in the diagram? (Choose two.)
192.168.65.31
192.168.65.32
192.168.65.35
192.168.65.60
192.168.65.63
192.168.65.64

37
Given the network 192.168.25.0 shown in the graphic, which subnet mask would accommodate the number of hosts in each subnet?
255.255.0.0
255.255.224.0
255.255.255.0
255.255.255.224
255.255.255.240
255.255.255.248

38
Which two protocols allow network devices to report their status and events to a centralized network management device? (Choose two.)
Syslog
Telnet
HTTP
HTTPS
SNMP

39
What is true regarding the differences between NAT and PAT?
PAT uses the word “overload” at the end of the access-list statement to share a single registered address.
Static NAT allows an unregistered address to map to multiple registered addresses.
Dynamic NAT allows hosts to receive the same global address each time external access is required.
PAT uses unique source port numbers to distinguish between translations.

40
Refer to the exhibit. The graphic shows the output of a command issued on router RTB. According to the output, what two statements are true of router RTB? (Choose two.)
The router is connected to a router named Boise.
Router RTB is connected to a Cisco 1841 router.
Router RTB is directly connected to two other routers.
The IP address of the router interface connected to router RTB is 192.168.2.6.
The RTB router is connected to two Cisco devices by Fast Ethernet links.

41
Refer to the exhibit. The network administrator uses the command below to configure a default route to the ISP network :

RTB(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.6

A ping issued from the ISP is successful to router RTB. However, ping echo request packets arrive at a host that is attached to the Fa0/0 interface of RTB, and the replies do not make it back to the ISP router. What will fix this problem?
The ISP must be configured to forward packets from the 192.168.1.0 network.
The ip route command needs to be edited so that the next hop address is 10.1.1.5.
The ip route command needs to be edited so that the 192.168.1.1 address is the next hop address.
The ip route command should be removed from the RTB router configuration.

42
A network technician is using a network management station to gather data about the performance of devices and links within the ISP. Which application layer protocol makes this possible?
SNMP
FTP
DHCP
SMTP

43
What are two purposes of DNS? (Choose two.)
to dynamically assign IP addressing information to network hosts
to simplify the administration of host and default gateway addressing on client computers
to assign TCP port numbers to hosts as part of the data transfer process
to resolve human-readable domain names to numeric IP addresses
to replace the static HOSTS file with a more practical dynamic system

44
A hacker attempts to reach confidential information that is stored on a server inside the corporate network. A network security solution inspects the entire packet, determines that it is a threat, and blocks the packet from entering the inside network. Which security measure protected the network?
an IDS
an IPS
a host-based firewall
Anti-X software

45
How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?
30
256
2046
2048
4094
4096

46
In an IPv4 environment, what information is used by the router to forward data packets from one interface of a router to another?
destination network address
source network address
source MAC address
well known port destination address

47
A small tire retailer requires a low-cost WAN connection to its headquarters in order to manage its inventory and process customer sales in real time. Which WAN connection type is best suited to its needs?
Sonet
T3
dialup
DSL
leased line

48
The command copy tftp running-config has been entered on the router. What will this command do?
copy the configuration in RAM to a server
copy the configuration file from a server to RAM
copy the configuration file in NVRAM to RAM
copy the configuration file in NVRAM to a server
copy the configuration file from a server to NVRAM

49
Refer to the exhibit. The network administrator needs to configure the Fa0/0 interface of RTB so that hosts from RTA can connect to the server that is attached to RTB. Which two commands will the administrator use to accomplish this task? (Choose two.)
RTB# ip address 192.168.102.98 255.255.255.248
RTB(config-if)# ip address 192.168.102.99 255.255.255.252
RTB(config)# ip address 192.168.102.97 255.255.255.252
RTB(config)# no shutdown
RTB(config-if)# no shutdown
RTB(config-if)# ip address 192.168.102.97 255.255.255.252

50
Refer to the exhibit. A NOC technician at an ISP enters the command shown. What are two reasons to use this command? (Choose two.)
to map the path to 192.168.1.7
to test reachability to 192.168.1.7
to locate connectivity problems along the route to 192.168.1.7
to identify the ISPs that interconnect the NOC with the remote host with the address 192.168.1.7
to measure the time that packets take to reach 192.168.1.7 and return to the technician’s workstation

CCNA 4 Module 4 Discovery 4.0

noreply@blogger.com (Bongradz) — Fri, 19 Dec 2008 01:56:00 +0000

1. In addition to the technical considerations, what other major factor is used to evaluate the success of a network installation?
• final project costs
• maintenance costs
• user satisfaction
• statistics describing the performance of network devices

2. Which two network applications are most affected by network congestion and delays? (Choose two.)
• IP telephony
• live video webcasts
• audio file downloads
• online banking services
• file archival and retrieval

3. What two Cisco tools can be used to analyze network application traffic? (Choose two.)
• NBAR
• NetFlow
• AutoQoS
• Wireshark
• Custom Queuing

4. In network design, which technology can be implemented to prioritize traffic based on its importance and technical requirements?
• STP
• QoS
• RTP
• TCP
• VPN

5. What are two characteristics of voice over IP traffic? (Choose two.)
• Voice packets tend to be small.
• Voice packets must be processed in real time.
• Voice packets can effectively use TCP reliability features.
• Voice traffic can survive packet drops and retransmission delays.
• Voice packets must be converted to analog before being sent across the IP network.
• Voice packets automatically receive a higher priority value than other types of packets.

6. What are two things that a network designer can do to determine current and anticipated network traffic flows? (Choose two.)
• Survey end users to obtain customer input.
• Upgrade the Cisco IOS software in all networking devices to optimize traffic flow.
• Limit the analysis to host-to-server traffic because host-to-host traffic is unimportant.
• Run a network traffic analysis to determine which applications are in use and by whom.
• Conduct an inventory of all networking devices that includes model numbers and memory configurations

7. A company that has a traditional telephone system wants to convert to IP telephony. Which two factors should be considered for the design? (Choose two.)
• Digital communications systems have greater noise than analog systems when processing voice traffic.
• Voice-enabled routers or a server must be used for call control and signaling.
• Voice to IP conversions can cause router overhead.
• Power to the phones can be supplied through properly equipped patch panels or switches.
• The cost to combine voice and data VLANs can be a considerable amount.

8. Several web and email servers have recently been installed as part of an enterprise network. The security administrator has been asked to provide a summary of security features that can be implemented to help prevent unauthorized traffic from being sent into or out of sensitive internal networks. Which three features should the security administrator recommend? (Choose three.)
• firewalls
• priority queuing
• access control lists
• intrusion detection systems
• DHCP
• 128-bit WEP

9. The design of an IP telephony system needs to meet the technical requirements to provide a connection to the PSTN as well as provide high-quality voice transmissions using the campus network. Which two elements directly affect the ability of the design to meet these requirements?(Choose two.)
• voice-enabled firewall
• PoE switches and patch panels
• redundant backbone connectivity
• voice-enabled router at the enterprise edge
• separate voice and data VLANs with QoS implemented

10. When implementing VoIP services, which two design considerations should be followed?(Choose two.)
• Confirm that network jitter is minimal.
• Use TCP to reduce delays and dropped packets.
• Establish priority queuing to ensure that large data packets are sent uninterrupted.
• Disable real-time protocols to reduce queuing strategy demands.
• Ensure that packet delays do not exceed 150 ms.

11. What design strategy should be followed when designing a network that uses video on demand?
• implement the appropriate routing protocol to ensure that data segments arrive in order
• implement different QoS queues based on the type of video traffic being distributed
• install servers to store the data in a centrally located server farm
• configure queuing in the core routers to ensure high availability

12. When implementing QoS in traffic queues, what is the first step the designer should take to ensure that traffic is properly prioritized?
• define QoS policies
• define traffic classes
• determine traffic patterns
• identify traffic requirements
• identify networking equipment

13. Which two statements are characteristics of file transfer traffic flows? (Choose two.)
• RTP should be used.
• Traffic is predictable.
• Packets are small in size.
• Transfers are throughput intensive.
• Response-time requirements are low.

14. Which two items can be determined by diagramming internal traffic flow? (Choose two.)
• the type of ISP services needed
• the capabilities of end-user devices
• the areas where network congestion may occur
• the location of VPN servers used to connect teleworkers
• locations where high-bandwidth connections are required

15. Which two traffic types are examples of external traffic flows? (Choose two.)
• A user in the IT department telnets to the core layer router.
• A user in marketing connects to the web server of a competitor.
• A user in the IT department telnets into the access layer switch.
• A user in the services department logs in to a web-based email program.
• A user in accounting connects to an FTP server that is connected to the access layer switch.

16. Which service can be provided by the NetFlow Cisco utility?
• network planning and mapping
• IDS and IPS capabilities
• peak usage times and traffic routing
• network billing and accounting application
• security and user account restrictions
• source and destination UDP port mapping

17. Refer to the exhibit. If ACL 150 identifies only voice traffic from network 192.168.10.0/24 and no other traffic, which queue will voice traffic from other networks use?
• high
• normal
• medium
• default

18. Refer to the exhibit. After configuring QoS, a network administrator issues the command show queueing interface s0/1. What two pieces of information can an administrator learn from the output of this command? (Choose two.)
• queue traffic definitions
• priority list protocol assignments
• type of queuing being implemented
• number of packets placed in each queue
• queuing defaults that have been changed
• queuing has not been applied to this interface

19. An analysis of network protocols reveals that RTP and RTCP are being used. What uses these protocols?
• IDS
• VPN
• WLAN
• firewall
• real-time video

20. A company is considering adding voice and video to the data networks. Which two statements are true if voice and video are added? (Choose two.)
• PoE switches must be purchased.
• More UDP-based traffic flows will be evident.
• Response times will be increased even if QoS is implemented.
• QoS will most likely be implemented to prioritize traffic flows.
• VPNs will most likely be implemented to protect the voice traffic.

21. Refer to the exhibit. Which option correctly matches the terms on top with its definition on the bottom?
• A=1, B=3, C=2, D=4
• A=2, B=1, C=4, D=3
• A=2, B=4, C=1, D=3
• A=3, B=2, C=4, D=1
• A=4, B=3, C=1, D=2
• A=4, B=2, C=3, D=1

22. A database server is configured to purge all data that is 60 days old. Ten data items that are 60 days old are to be purged. However, there is a failure halfway through the transaction, and the entire transaction is voided. What type of transaction action occurred?
• atomic
• consistent
• durable
• isolated

23. What is the primary goal of QoS?
• classification of traffic
• filtering and queuing voice traffic
• reducing bandwidth requirements
• providing priority service to selected traffic

24. Which technology provides a mechanism for implementing QoS at Layer 2?
• ToS
• CoS
• DSCP
• IP precedence

25. A customer purchases tickets online and pays using a credit card, but the system goes down before the transaction is complete. What transaction type retains a record of this transaction after the system failure so that the customer will still receive the tickets and the credit card account will be debited accordingly?
• atomic
• consistent
• durable
• isolated

26. Refer to the exhibit. The network design documents include requirements to prevent switching loops, to provide link-specific failover, and to provide Layer 3 recovery. Which two protocols would be needed to provide the support? (Choose two.)
• HDLC
• HSRP
• PPP
• RSTP
• VTP

27. network design must minimize latency to support real-time streaming applications. Which two protocols enable control and scalability of the network resources and minimize latency by incorporating QoS mechanisms? (Choose two.)
• RTCP
• HSRP
• RSTP
• RTP
• RPC

28. Which two major differences are associated with IP telephony when compared to traditional telephony that uses a PBX? (Choose two.)
• manages phones centrally
• utilizes centralized call routing
• creates peer-to-peer relationships between phones
• requires a separate infrastructure to support data transfer
• requires significant manual configuration when adding, moving, or changing phones

29. When QoS is implemented in a converged network, which two factors can be controlled to improve performance? (Choose two.)
• link speed
• delay
• packet routing
• jitter
• packet addressing

CCNA 4 Module 2 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 15 Dec 2008 14:42:00 +0000

1. During an evaluation of the currently installed network, the IT staff performs a gap analysis to determine whether the existing network infrastructure can support the desired new features. At which stage of the Cisco Lifecycle Services approach does this activity occur?
• Prepare Phase
• Plan Phase
• Design Phase
• Implement Phase
• Operate Phase
• Optimize Phase

2. Which stage of the Cisco Lifecycle Services strategy is usually completed before an organization issues a Request For Proposal (RFP) or Request For Quotation (RFQ)?
• Prepare Phase
• Plan Phase
• Design Phase
• Implement Phase
• Operate Phase
• Optimize Phase

3. What is the purpose of SNMP?
• to facilitate the exchange of information between devices and the NMS
• to monitor and control managed network devices
• to report user logins to a monitoring station
• to verify traffic throughout the network and keep a log of all activity

4. During an analysis of a customer network, several possible opportunities for network improvement are identified. At which stage of the Cisco Lifecycle Services does this process occur?
• Prepare Phase
• Plan Phase
• Design Phase
• Implement Phase
• Optimize Phase
• Operate Phase

5. What provides the initial data for the Optimize Phase?
• performance monitoring
• business goals
• technical goals
• RFP

6. Which two statements are true regarding the response to an RFQ?(Choose two.)
• The response should be brief.
• it should strictly conform to the formatting requirements specified by the RFQ.
• Only the items that the contracting company will be addressing should be answered.
• The response helps the customer compare pricing with other potential contractors.
• The response is more complicated than a response to a RFP.

7. What are two disadvantages of using a bottom-up approach instead of a top-down approach to network design? (Choose two.)
• It can result in an inappropriate network design.
• A new design cannot be implemented right away.
• It does not take into account the business goals of the company.
• This approach is not commonly practiced and is therefore not as well known.
• It requires tedious and time-consuming meetings with the customer to develop an understanding of the organization.

8. What is a business constraint that may impact the WAN design of a company?
• company policy regarding specific operating systems on LAN devices
• current monitoring protocols implemented on end-user devices
• non-availability of end users during implementation
• company policy requiring the use of specific vendor networking equipment due to partnerships

9. What is the purpose of preparing a business case?
• to justify the financial investment in implementing the technology change
• to provide an example of a previous job done in the RFP
• to define the technical requirements of the network
• to define timelines and critical milestones

10. What is the purpose of creating a prioritized list of technical requirements?
• defines the project scope
• determines the business profitability
• creates a feasibility report for analysis
• identifies existing and new user groups

11. A network engineer is analyzing the network of a potential client company to identify problems and determine whether a network upgrade or addition is needed. Which role in the sales team is this engineer assuming?
• post-sales field engineer
• pre-sales engineer
• account manager
• network designer

12. Which two statements best describe the responsibilities of an account manager? (Choose two.)
• acts as the primary point of contact between the company and the client
• directs the sales teams and support personnel
• provides technical support to critical clients
• selects the equipment and technologies to be used for the client solution
• acts as the network design lead

13. What is the purpose of system-level acceptance testing?
• To develop an installation plan for the newly designed network
• to train end users and support personnel on the newly installed network
• to check that the newly installed network meets the business goals and design requirements
• to justify the financial investment required to implement the technology change

14. What is a purpose of establishing a network baseline?
• It provides a statistical average for network performance.
• It manages the performance of network devices.
• It creates a point of reference for future network evaluations.
• It checks the security configuration of network devices.

15. When should a network baseline be performed within the stages of the Cisco Lifecycle Services?
• Prepare Phase
• Plan Phase
• Design Phase
• Implement Phase
• Operate Phase

16. What are two benefits of using a top-down approach instead of a bottom-up approach to network design? (Choose two.)
• incorporates organizational requirements
• allows for a quick response to a design request
• requires less time up front to create a network design
• clarifies design goals from the perspective of applications and network solutions
• facilitates a design by using devices and technologies that are based on previous experience

17. Which software component is installed on network devices that are managed through SNMP?
• management agents
• management stations
• network management protocol
• Management Information Base (MIB)

18. A network engineer working for a contracting company is informed of a pre-bid meeting with a potential client. What purpose does the network engineer have for attending the pre-bid meeting?
• to submit request for proposal responses
• to discuss proposed installation and monitoring plans
• to perform system-level acceptance tests on the current network
• to clarify project scope and timelines not included in the original request for proposal
• to create a business case outlining reasons for financial investment in a network upgrade

19. A major corporation has decided to hire someone to upgrade their network infrastructure. A network consulting company wants the job. What document must the network consulting company obtain to learn about the business goals, the project scope, the requirements for the new network and the expected deliverables?
• Business Case
• Project Plan
• Request for Proposal
• Request for Comments

20. A corporation (client) wants a network upgrade and is putting out a request for services to various network consulting companies (contractors). A RFQ is required. Which statement is true concerning the RFQ?
• sent from the contractors to the client in response to a RFP
• sent from the client to the contractors along with the RFP to provide more specific technical details
• sent from the client to the contractors in place of a RFP when the technical specifications of a project are known
• sent from the contractors to the client outlining reasons for financial investments for the network upgrade

21. Which stage of the Cisco Lifecycle Services involves proactive management to identify and resolve issues before the organization is affected?
• Prepare Phase
• Plan Phase
• Design Phase
• Implement Phase
• Operate Phase
• Optimize Phase

22. Why is it important to prioritize business goals when developing network design?
• to ensure that the least expensive technologies are implemented first
• to simplify the configuration, administration, and monitoring of the newly installed network
• to anticipate the effects of changes and growth of the business
• to adhere to the best opportunities to contribute to the success of the business

23. Which two items help identify business goals and priorities before a new network project starts? (Choose two.)
• installation
• motivation
• profitability
• trustworthiness
• customer satisfaction

24. A network engineer working for ABC company is writing a response to an RFP for a network upgrade and must create an executive summary. Which statement describes the basic components of an executive summary?
• quick overview of the problem, the recommended solution, and the justification for ABC company doing the job
• detailed description of the solution, including but not limited to, timelines, turnover schedule, warranty information, and emergency recovery information
• detailed description of costs including, the cost of software and hardware components, licensing requirements, labor cost, and other applicable fees
• multiple page document containing additional information such as detailed lists of equipment required, diagrams, company background information, and insurance coverage

25. In a network management architecture, which statement best describes a management agent?
• communication protocol used between a management station and managed device
• standardized database that a device keeps about itself concerning network performance parameters
• host with the management application loaded that is used by the administrator to monitor and configure network devices
• software running on a managed device to collect network information and allow that device to be managed by a management station

CCNA 4 Module 1 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 15 Dec 2008 14:30:00 +0000

1
Refer to the exhibit. What happens when Host 1 attempts to send data?

Frames from Host 1 are dropped, but no other action is taken.

Frames from Host 1 cause the interface to shut down, and a log message is sent.

Frames from Host 1 are forwarded, but a log message is sent.

Frames from Host 1 are forwarded, and no log message is sent because the switchport port-security violation command was not configured.

2
Refer to the exhibit. Which two devices are part of the access design layer? (Choose two.)

Edge2

ISP4

BR4

FC-AP
FC-CPE-1
FC-ASW-2

3
Refer to the exhibit. Two access layer Catalyst switches are connected. Both switches have ports configured for VLANs 40 and 50 as shown. What must be configured on the two switches to allow the link between the two switches to carry data for multiple VLANs?

trunking

STP

ACLs

switch blocks

4
What are three ways to ensure that an unwanted user does not connect to a wireless network and view the data? (Choose three.)
disable SSID broadcasting

configure filters to restrict IP addresses

use authentication between clients and the wireless device

use NetBIOS name filtering between clients and the wireless device
configure strong encryption such as WPA
use a WEP compression method

5
Refer to the exhibit. The server sends an ARP request for the MAC address of its default gateway. If STP is not enabled, what is the result of this ARP request?

Router_1 contains the broadcast and replies with the MAC address of the next-hop router.

Switch_A replies with the MAC address of the Router_1 E0 interface.
Switch_A and Switch_B continuously flood the message onto the network.

Switch_B forwards the broadcast request and replies with the Router_1 address.

6
Which two considerations are valid when designing access layer security? (Choose two.)

In a large wireless network, the most efficient method to secure the WLAN is MAC address filtering.

DoS attacks are normally launched against end-user PCs and can be mitigated by installing personal firewalls on all company PCs.
SSH is more secure than Telnet to administer network devices.
Disabling unused ports on the switches helps prevent unauthorized access to the network.

Attacks originating inside the network are common, but placing servers inside a DMZ cannot protect against this type of attack.

7
A network designer is creating a new network. The design must offer enough redundancy to provide protection against a single link or device failure, yet must not be too complex or expensive to implement. What topology would fill these needs?

star

full mesh

partial mesh

extended star

hub and spoke

8
Centralizing servers in a data center server farm can provide which benefit over a distributed server environment?

It keeps client-to-server traffic local to a single subnet.

Servers located in a data center require less bandwidth.
It is easier to filter and prioritize traffic to and from the data center.
Server farms are not subject to denial of service attacks.

9
Refer to the exhibit. Which two situations cause the router to display the rommon1> prompt? (Choose two.)

This is a normal stage in the router boot sequence.

A password recovery procedure is in progress.

The Cisco IOS software could not be loaded from flash memory or a TFTP server.

The configuration was not saved before the last reload.

The configuration register was changed to 0x2142 before the last reload.

10
Refer to the exhibit. The network administrator creates a standard access control list to prohibit traffic from the 192.168.1.0/24 network from reaching the 192.168.2.0/24 network while still permitting Internet access for all networks. On which router interface and in which direction should it be applied?

interface fa0/0/0, inbound

interface fa0/0/0, outbound

interface fa0/0/1, inbound

interface fa0/0/1, outbound

11
In a well-designed, high-availability network, which device significantly affects the most users if a failure occurs?

desktop PC of the user

large switch in the network core layer

large switch in the network distribution layer

small workgroup switch in the network access layer

12
Which three statements describe the functions of the Cisco hierarchical network design model? (Choose three.)

Route summarization is not necessary at the core and distribution layers.

The distribution layer is responsible for traffic filtering and isolating failures from the core.

Two goals of the core layer are 100 percent uptime and maximizing throughput.

The access layer provides a means of connecting end devices to the network.

The distribution layer distributes network traffic directly to end users.

The core layer usually employs a star topology.

13
Which Cisco IOS function can be configured at the distribution layer to filter unwanted traffic and provide traffic management?

virus protection

spyware protection

VPNs

access control lists

14
What address can be used to summarize networks 172.16.1.0/24, 172.16.2.0/24, 172.16.3.0/24, and 172.16.4.0/24?

172.16.0.0/21

172.16.1.0/22

172.16.0.0 255.255.255.248

172.16.0.0 255.255.252.0

15
Refer to the exhibit. What effect does the ACL shown have on network traffic, assuming that it is correctly applied to the interface?

All traffic to network 172.16.0.0 is denied.

All TCP traffic is denied to and from network 172.16.0.0.

All Telnet traffic from the 172.16.0.0 network to any destination is denied.

All port 23 traffic to the 172.16.0.0 network is denied.

All traffic from the 172.16.0.0 network is denied to any other network.

16
Which two statements are true regarding network convergence? (Choose two.)

In a large network, using the EIGRP or OSPF routing protocols rather than RIPv2 may improve convergence time.

Using STP at the core layer improves convergence time by allowing the use of redundant links between devices.

Route summarization improves convergence time by minimizing the size of the routing table.

A full mesh topology improves convergence time by allowing load balancing.

ACLs can be configured to improve convergence time.

17
The network administrator is designing network connectivity for a home teleworker. The teleworker needs secure access to download and upload documents on the network file server. What network connection would be most cost efficient while still meeting the security and connectivity needs of this teleworker?

dedicated leased line connection with a dialup backup link

Frame Relay connection with a DSL backup link

DSL VPN connection with a dialup backup link

ATM connection with a DSL VPN backup link

DSL connection with no backup link

18
Which three functions are performed at the distribution layer of the hierarchical network model? (Choose three.)

aggregating bandwidth by concentrating multiple low-speed access links

isolating network problems to prevent them from affecting the core layer

allowing end users to access the local network

summarizing routes from the access layer

preserving bandwidth at the access layer by filtering network functions

accelerating data transfer between links in the core layer

19
Refer to the exhibit. Which two statements correctly describe the benefits of the network access layer design shown? (Choose two.)

If Host A sends a broadcast message, only hosts in VLAN10 receive the broadcast frame.

If Host A attempts to transmit data at the same time as another host, only hosts in VLAN10 are affected by the collision.

Segmenting all voice traffic on a separate VLAN facilitates QoS by allowing devices to mark the traffic originating from the voice VLAN with the highest priority.

VLANs improve network performance by facilitating the use of route summarization.

VLANs at the access layer help guarantee network availability by facilitating load balancing.

20
The ability to connect securely to a private network over a public network is provided by which WAN technology?

DSL

Frame Relay

ISDN

PSTN

VPN

CCNA 4 Module 5 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 15 Dec 2008 14:23:00 +0000

1 Which three design requirements are implemented at the access layer? (Choose three.)
PoE VLANs
high-density routing
packet filtering
rapidly converging routing protocols
QoS traffic classification and marking

2 When applying network security, what security measure should be implemented first?
securing the network devices
implementing the firewalls or filters at the enterprise edge
applying security to resources accessed by internal users
applying ACLs to the interfaces of the routers in the internal network

3 What are three features of a Catalyst 2960 switch? (Choose three.)
network layer functionality
redundant power availability
route summarization
SNMP switch clustering
inter-VLAN routing

4 Which rule should be followed when implementing the security requirements of a network design?
Always use a common security plan for all business needs.
As standard practice, lower access restrictions for users if cost is too high.
Avoid reducing security in order to add additional network capabilities.
When possible, implement an IDS to protect users from spam.

5 Using expandable, modular network devices is a key element of what network design criteria?
availability
performance
scalability
security

6
Refer to the exhibit. What is an advantage of having two links connected between the two switches shown?
provides redundancy in case one of the switches fails
provides connectivity to Switch1 when the link to the server fails
provides connectivity when one of the connections between the switches fails
provides power to the other switch when the other switch has lost AC power

7 When considering converged network designs, it is important to identify appropriate service demands. What is a concern when preparing a network design to fit this environment?
business data compensation for sensitivity to noise
location and placement of firewalls
voice-level quality of service
security policy requirements

8 What is the function of the access layer in the Cisco three-layer hierarchical internetworking model?
provides QoS classification and marking
implements a fast-converging routing protocol
uses routed interconnections between devices
aggregates traffic and performs route summarization

9 Which network design process identifies where to place access points?
site survey
risk assessment
scalability design
network protocol analysis

10 What characteristic in a routing protocol allows it to support the network design criteria for availability?
CIDR support
fast convergence
timed updates
VLSM support

11 What characteristic of a network supports high availability?
VPNs
high-bandwidth paths to servers
redundancy
wireless management

12 What is a primary function of a wireless LAN controller?
tuning each AP channel for optimal coverage
providing PoE to the wireless clients
distributing VLAN information to the wireless clients
serving as the point of connection between wireless clients and the wired LAN

13 Which two factors should be considered when designing a wireless LAN that provides seamless roaming capabilities? (Choose two.)
use of a wireless controller to manage IP addressing
type of routing protocols
location of existing wired clients
coverage
position of MDF

14 A company lists this equipment in their network design:
Two Catalyst 4503 Layer 3 switches
One 5500 security appliance firewall
Two Catalyst 6509 switches
Two lightweight access points
Two Catalyst 2960 switches

Which two types of devices would be appropriate to use at the access layer to provide end-user connectivity? (Choose two.)
Catalyst 4503 switches
Cisco 1841 router
Catalyst 6509 switches
lightweight access points Catalyst 2960 switches

15 What limitations of the 2960 switch prevent it from providing the services needed in the Distribution layer?
It is limited to copper connections.
It does not support QoS.
It does not support voice VLAN capability.
It does not support route summarization.

16 A state-funded college wants to implement Cisco wireless IP phones for employees to use while on campus. The college currently has only wired network device access. Which two devices must be incorporated into the network design to best accommodate roaming for wireless IP phones? (Choose two.)
voice VLAN capable switch
autonomous AP
PoE switch
Cisco wireless LAN controller
2960 switch with 48 100-Mb ports
lightweight access points

17 What type of WAN service is Frame Relay?
dedicated
cell switched
packet switched
circuit switched

18 What is integrated into a Cisco IP phone to reduce the number of ports needed in the wiring closet?
hub
router
switch
firewall appliance

19
Refer to the exhibit. Which statement is true regarding how the ISP router filters traffic?
Traffic from the 64.100.0.1 address to any destination on the Internet is denied.
Traffic from any source address entering the ISP router interface s0/0/0 is permitted.
Only traffic with a source address of 64.100.0.1/30 is allowed into the ISP router interface s0/0/0.
All traffic from the 64.100.0.0/21 network can access the Internet.
Traffic from any source address can access the 64.100.0.0/21 network.

20 Which two statements are true regarding the following extended ACL? (Choose two.)
access-list 101 deny tcp 172.16.3.0 0.0.0.255 any eq 20
access-list 101 deny tcp 172.16.3.0 0.0.0.255 any eq 21
access-list 101 permit ip any any
FTP traffic originating from network 172.16.3.0/24 is denied.
All traffic is implicitly denied.
FTP traffic destined for the 172.16.3.0/24 network is denied.
Telnet traffic originating on network 172.16.3.0/24 is denied.
Web traffic originating from 172.16.3.0 is permitted.

21 Which statement applies to a large network with thousands of nodes?
Each wireless phone is normally in a separate VLAN for security reasons.
Multiple firewalls exist throughout the access layer for maximum security protection.
Firewalls cannot be implemented in the multilayer switches and routers.
Intrusion detection is more likely to be performed by a separate device rather than integrated into a switch or router.

CCNA 4 Module 6 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 15 Dec 2008 14:14:00 +0000

1
Refer to the exhibit. The IT management has determined that the new subnet for WGROUP3 needs to be broken down into four more subnets. What would the subnet mask be for the four newly created subnets within WGROUP3?

255.255.128.0

255.255.192.0

255.255.224.0

255.255.248.0

255.255.252.0

255.255.255.0

2
A network administrator is using the 10.0.0.0/8 network for the company. The administrator must create a masking scheme to support 750 users at the main office and 620 users at the remote office. What mask should be assigned to the 10.0.0.0/8 network to preserve the most addresses?

255.255.255.0

/19

/20

255.255.252.0

/23

/21

3
Refer to the exhibit. The network administrator wants router RTA to send only the summarized route of 10.10.0.0/16 to RTC. Which configuration accomplishes this?

RTA(config)# interface s0/0
RTA(config-if)# ip summary-address eigrp 101 10.10.0.0 255.255.0.0
RTA(config-if)# exit
RTA(config)# router eigrp 101
RTA(config-router)# no auto-summary

RTA(config)# interface s0/1
RTA(config-if)# ip summary-address eigrp 101 10.10.0.0 255.255.0.0
RTA(config-if)# exit
RTA(config)# router eigrp 101
RTA(config-router)# no auto-summary

RTA(config)# interface s0/0
RTA(config-if)# ip summary-address eigrp 101 10.10.0.0 255.255.0.0

RTA(config)# interface s0/1
RTA(config-if)# ip summary-address eigrp 101 10.10.0.0 255.255.0.0

4
When should the command no auto-summary be used?

with RIP version 1, to enable classless routing

with RIP version 2, to enable classless routing

with RIP version 1, when discontigous networks exist

with RIP version 2, when discontigous networks exist

5
After activating IPv6 traffic forwarding, configuring IPv6 addresses, and globally configure RIPng, what is the remaining step to activate RIPng?

Enter the ipv6 router rip name command and then use network statements to activate RIPng on the interfaces.

Enter the ipv6 router rip name command and then specify which interfaces run RIPng, which are passive, and which only receive.

Enter the interface mode for each IPv6 interface and enable RIPng with the ipv6 ripnameenable command.

Enter the interface mode for each IPv6 interface and enable the multicast group FF02::9, and then activate RIPng globally using the ipv6 router rip name command.

Enter the router rip command, and then activate RIPng using the version command. RIPng then automatically runs on all IPv6 interfaces.

6
Refer to the exhibit. Assuming that the default EIGRP configuration is running on both routers, which statement is true about Router A reaching the 2.2.2.0/24 network?

The no auto-summary command needs to be issued to disable automatic summarization.

The network 2.2.2.0 command needs to be issued to ensure that Router A recognizes the 2.2.2.0 network.

EIGRP supports VLSM and automatically recognizes the 2.2.2.0 network.

EIGRP does not support VLSM; therefore it cannot be used with discontiguous networks.

7
Refer to the exhibit. What are the broadcast addresses for each subnet?

Admin - 172.16.31.0
QA - 172.16.1.127
Development - 172.16.2.255
Sales - 172.16.32.255

Admin - 172.16.31.255
QA - 172.16.1.255
Development - 172.16.3.255
Sales - 172.16.63.255

Admin - 172.16.31.255
QA - 172.16.1.127
Development - 172.16.3.255
Sales - 172.16.63.255

Admin - 172.16.31.0
QA - 172.16.1.255
Development - 172.16.2.255
Sales - 172.16.32.255

8
Refer to the exhibit. What is the first usable IP address that can be assigned to the WGROUP3 switch?

172.16.50.96/27

172.16.50.97/27
172.16.50.98/27

172.16.50.99/27

9
Which statement describes MD5 authentication for neighbor authentication?

All passwords are sent in clear text when neighbors first learn about each other.

Only the initiating router sends its password using encrypted text when it first discovers a new router.

All routers send their password using encrypted text only when they first learn of each other.

All routers send their password using encrypted text each time they exchange update packets.

10
What is a good design practice when developing a hierarchical addressing scheme?

Address the nodes in the Access Layer and work toward the Core Layer.

Assign addresses to the Core devices before planning the addressing scheme for the server farm.

Determine where statically configured addressing will be implemented.

Determine what percentage of devices are wired and what percentage of devices are wireless.

11
Refer to the exhibit. Which set of router commands is required to turn on unequal-cost load sharing so that RTRA selects the path A-B-E and the lowest cost path A-C-E to the Internet?

RTRA(config)# router eigrp 1
RTRA(config-router)# variance 2
RTRA(config)# router eigrp 1
RTRA(config-router)# variance 1

RTRA(config)# router eigrp 1
RTRA(config-router)# maximum-paths 2

RTRA(config)# router eigrp 1
RTRA(config-router)# maximum-paths 1

12
How would the routes for networks 172.16.1.0/24, 172.16.3.0/24, and 172.16.15.0/24 be summarized?

172.16.0.0/20

172.16.0.0/21

172.16.0.0/22

172.16.0.0/24

13
How many bits make up an IPv6 address?

32

48

64

128

14
A network engineer researched whether there are mechanisms available to help with the transition from an IPv4 addressing structure to IPv6. What three options did the engineer find? (Choose three.)

A protocol translation mechanism allows communication between the IPv4 and IPv6 networks.

A packet analyzer determines the addressing structure and converts it to the appropriate IPv4 or IPv6 scheme.

New Core devices that support IPV6 must be purchased.

A protocol converter changes IPv4 packets into IPv6 packets and vice versa.

A dual-stack network design allows both IPv4 and IPv6 addressing to be used on all network devices.

Tunneling allows IPv4 packets to be encapsulated so that they can traverse IPv6 networks and vice versa.

15
A network administrator is asked to design a new addressing scheme for a corporate network. Presently, there are 850 users at the head office, 220 users at sales, 425 at manufacturing, and 50 at the research site. Which statement defines the correct VLSM addressing map with minimal waste using the 172.17.0.0/16 network?

172.17.0.0/20 head office
172.17.1.0/21 manufacturing
172.17.1.0/22 sales
172.17.3.0/26 research

172.17.48.0/19 head office
172.17.16.0/20 manufacturing
172.17.48.128/25 sales
172.17.48.0/26 research

172.17.0.0/22 head office
172.17.4.0/23 manufacturing
172.17.5.0/24 sales
172.17.6.0/26 research

172.17.2.0/22 head office
172.17.3.0/23 manufacturing
172.17.4.0/26 sales
172.17.4.128/25 research

16
What best describes a discontiguous network?

combines several classfull networking address

contains more than one route to a destination

implements more than one routing protocol

separated from the rest of the hierarchical group by another network

17
What is another format for the IPv6 address 1080:0000:0000:0000:0000:0000:1267:01A2?

1080::1267:01A2

1080:0:0:0:0:1267:01A2

1080::0:1267:01A2

1080:::::1267.01A2

18
Refer to the exhibit. A company has decided to add a new workgroup. If the subnetting scheme for the network uses contiguous blocks of addresses, what subnet is assigned to WGROUP3?

172.16.3.12/29

172.16.3.16/29

172.16.3.20/29

172.16.3.24/29

172.16.3.32/29

19
What two advantages does CIDR provide to a network? (Choose two.)

dynamic address assignment

automatic route redistribution

reduced routing update traffic
easier management of summarization

automatic summarization at classfull boundaries

20
Refer to the exhibit. What must an administrator do on R3 to ensure that update packets are sent with subnet mask information?

Add the commands:
R3(config-router)# auto-summary
R3(config-router)# no version 2

Add the commands:
R3(config-router)# version 2
R3(config-router)# no auto-summary

Change the network statement on R3:
R3(config)# network 10.10.4.0

Add the command:
R3(config)# ip route 0.0.0.0 0.0.0.0 s0/0

CCNA 2 Module 7 Discovery 4.0

noreply@blogger.com (Bongradz) — Sat, 29 Nov 2008 23:46:00 +0000

1. User1 is sending an e-mail to User2@cisco.com. What are two characteristics of the process of sending this data? (Choose two.)
• It utilizes TCP port 110.
• A TCP connection is established directly between the User1 and User2 client computers in order to send the e-mail message.
• It utilizes a store and forward process.
• The same application layer protocol is used to send the e-mail and retrieve it from the destination server.
• SMTP is used to send the e-mail message to the mail servers.

2. To meet customer expectations, an ISP must guarantee a level of service that is based on what two factors? (Choose two.)
• accessibility
• adaptability
• availability
• reliability
• scalability

3. Which two statements are true about the OSI and TCP/IP models? (Choose two.)
• The two bottom layers of the TCP/IP model make up the bottom layer of the OSI model.
• The TCP/IP model is a theoretical model and the OSI model is based on actual protocols.
• The OSI network layer is comparable to the Internet layer of the TCP/IP model.
• The TCP/IP model specifies protocols for the physical network interconnection.
• The TCP/IP model is based on four layers and the OSI model is based on seven layers.

4. Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?
• Host1 sends an ACK message to Host2.
• Host1 sends a SYN message to Host2.
• Host1 sends a SYN-ACK message to Host2.
• Host2 sends an ACK message to Host1.
• Host2 sends a SYN message to Host1.
• Host2 sends a SYN-ACK message to Host1.

5. What are three characteristics of network reliability? (Choose three.)
• Redundant hardware provides enhanced reliability.
• Reliability is measured as a percent.
• Reliability is the responsibility of the ISP customers.
• Fault tolerance is a measure of reliability.
• The longer the MTBF, the greater the reliability.

6. Which two statements describe the FTP protocol? (Choose two.)
• It uses well-known port 23.
• The protocol interpreter is responsible for the data transfer function.
• In passive data connections, the FTP client initiates the transfer of data.
• It requires two connections between client and server.
• FTP servers open a well-known port on the client machine.

7. What is the function of the TCP three-way handshake?
• It enables the synchronization of port numbers between source and destination hosts.
• It immediately triggers the retransmission of lost data.
• It synchronizes both ends of a connection by allowing both sides to agree upon initial sequence numbers.
• It identifies the destination application on the receiving host.

8. What are three characteristics of HTTPS? (Choose three.)
• It uses a different client request-server response process than HTTP uses.
• It specifies additional rules for passing data between the application and data link layers.
• It supports authentication.
• It allows more simultaneous connections than HTTP allows.
• It encrypts packets with SSL.
• It requires additional server processing time.

9. Which DNS zone resolves an IP address to a qualified domain name?
• dynamic lookup
• forward lookup
• resolution lookup
• reverse lookup

10.

What type of update allows client computers to register and update their resource records with a DNS server whenever changes occur?
• dynamic
• zone transfer
• local recursive query
• root domain query
• top-level domain query

11. Refer to the exhibit. Which two statements are true about this file? (Choose two.)
• If the gateway address changes, the file will be updated dynamically.
• The command ping fileserv will use IP address 172.16.5.10.
• If the ping www.cisco.com command is issued, the file will be checked for the Cisco web server IP address before DNS is queried.
• The file must be created by the user if it is to be used by a workstation.
• Name to IP address mappings are added to the file after they are received from DNS.

12. Which two tasks are the responsibility of the local DNS server? (Choose two.)
• maintaining a large number of cached DNS entries
• maintaining the ISP server
• mapping name-to-IP addresses for internal hosts
• forwarding name resolution requests to a caching-only server
• forwarding all name resolution requests to root servers on the Internet

13. What are three unique characteristics of UDP? (Choose three.)
• connection oriented
• full-duplex operation
• low overhead
• no flow control
• no error-recovery function
• reliable transmission

14. A manufacturing company is looking into subscribing to services from a new ISP. The company requires hosted world wide web, file transfer, and e-mail services. Which three protocols represent the key application services that are required by the company? (Choose three.)
• FTP
• HTTP
• ICMP
• PPP
• Telnet
• SMTP

15. Which two options correctly match protocol and well-known port number? (Choose two.)
• DNS - 25
• FTP - 110
• HTTP - 80
• POP3 - 25
• SMTP - 25

16. Within TCP, what combination makes up a socket pair?
• source port with destination port
• source IP address with destination port
• source IP address and destination IP address
• source IP address and port with a destination IP address and port

17. Which protocol is used to send e-mail, either from a client to a server or from a server to another server?
• SNMP
• FTP
• SMTP
• HTTPS

18. Refer to the exhibit. The PC is requesting HTTP data from the server. What is a valid representation of source and destination sockets for this request?
• Source - 192.168.1.17:80 ; Destination - 192.168.2.39:80
• Source - 192.168.1.17:80 ; Destination - 192.168.2.39:1045
• Source - 192.168.1.17:1045 ; Destination - 192.168.2.39:80
• Source - 192.168.1.17:1045 ; Destination - 192.168.2.39:1061

19. What type of DNS server is typically maintained by an ISP?
• caching-only
• root
• second-level
• top-level

20.

When a host is communicating with multiple applications on the same server at the same time, which of the following will have the same value for each session? (Choose two.)
• IP address
• MAC address
• session number
• sequence number

21. A client is communicating with a server on a different segment of the network. How does the server determine what service is being requested by the client?
• The server will apply the default service configured in directory services.
• The server will use ARP to discover the appropriate service from the local router.
• The server will send a request to the client asking for the appropriate service.
• The server will determine the appropriate service from the destination port field.

CCNA 4 Module 3 Discovery 4.0

noreply@blogger.com (Bongradz) — Sat, 29 Nov 2008 11:13:00 +0000

1. It is important to identify the details of network sections and devices that will be affected or involved in a new design. This information is included in which section of the Network Design Requirements Document?
• Project Goal
• Project Scope
• Technical Requirements
• Current State of the Network

2. Which two pieces of information does the network designer need to determine if the Cisco IOS of a router requires an upgrade? (Choose two.)
• amount of NVRAM installed
• model number of the router
• number of interfaces and installed HWICs
• installed Cisco IOS feature set and version
• error statistics for each interface

3. Which three pieces of information need to be considered when selecting the proper Cisco IOS version for an upgrade? (Choose three.)
• processor ID
• interface type
• amount of DRAM
• bootstrap version
• device make and model
• size of system flash memory

4. What are two practices a network technician should follow when installing a new interface card in a router? (Choose two.)
• Be sure the interface card faceplate does not touch the chassis rear panel.
• Do not tighten the captive screws until the router has been powered on and recognizes the card.
• Store the blank faceplate inside the card slot to be used if the card is removed.
• Handle the interface card by the edges to avoid static discharge.
• Push the interface card into place until the edge connector is seated securely

5. The new serial interface card for the router arrives and the network technician reads that it is hotswappable. What does this mean?
• The card cannot be installed while the router is powered on because static discharge could damage the card.
• The card cannot be installed until the router is powered off and completely cooled down.
• The card can be installed while the router is powered on if the router supports this technology.
• The card is a replacement and must be installed in the same slot as the card it is replacing.

6. Refer to the exhibit. A network administrator issues the command shown to gain knowledge about a poorly documented network. Which two pieces of information can the network administrator discover from the command output? (Choose two.)
• One connected device has router capability.
• The entire network contains a total of five Cisco devices with CDP enabled.
• None of the directly connected network devices have been configured with an IP address.
• Device EDGE_2811 is connected to port Fast Ethernet 0/0 on device C3750-24_MDF.
• Five Cisco devices with CDP enabled are directly connected to device C3750-24_MDF

7. Refer to the exhibit. Which of the three Cisco IOS images shown will load into RAM?
• The router selects an image depending on the value of the configuration register.
• The router selects the third Cisco IOS image because it is the most recent IOS image.
• The router selects the second Cisco IOS image because it is the smallest IOS image.
• The router selects an image depending on the boot system command in the configuration.
• The router selects the third Cisco IOS image because it contains the advipservicesk9 image.

8. An administrator wants to download a new Cisco IOS software version to the local router. Which command performs this task?
• copy tftp flash
• copy flash run
• copy start tftp
• copy flash tftp
• copy tftp start

9. Refer to the exhibit. The top of the output shows the Cisco Feature Navigator regarding a Cisco IOS image that the administrator wants to install on a router. Below it is the output from the show version command for that router. Which statement is true regarding the capacity of the router to run this Cisco IOS image?
• There is not enough DRAM and flash.
• There is enough DRAM and flash.
• There is enough DRAM but not enough flash.
• There is enough flash but not enough DRAM.

10. Which two items are objectives of a WLAN design site survey? (Choose two.)
• identify coverage areas
• determine primary AP locations
• determine what AP equipment should be purchased
• determine how many users will access the WLAN
• identify the bottleneck of the LAN infrastructure

11. Refer to the exhibit. Which two actions improve the weaknesses of the topology shown, assuming that each access layer segment is in its own subnet? (Choose two.)
• Implement redundant links to each server by adding additional NICs.
• Implement a reduntant link from all access layer switches to Admin, Dist, and Server Farm.
• Implement a backup firewall with a link to a secondary ISP and implement a redundant link to the DMZ.
• Implement reduntant links from the existing firewall to all access layer switches.
• Implement redundant links from the DMZ to Admin and Dist.

12. A company is beginning to analyze their new Cisco IOS upgrade requirements. What is one of the router components that a network administrator must consider when selecting a new Cisco IOS version?
• processor type
• storage space in NVRAM
• interfaces and modules to be supported
• compatibility of the bootstrap version with the new Cisco IOS software

13. An employee at a company notices that the wireless signal strength indicator on his laptop fluctuates from good to low. The network administrator decides to do a site survey of that area. Which three factors need to be included in the survey? (Choose three.)
• type and model number of the WNIC of the laptop
• number of users in the area
• location of the AP
• list of MAC addresses filtered by the AP
• number of simultaneous applications running on the laptop of the employee
• location of walls and filing cabinets in the office

14. The new network design for AnyCompany must include support of voice and video traffic. Before upgrading, the network designer checks whether the existing devices can support the new requirements. Which three items does the designer need to check? (Choose three.)
• number of routers and switches owned by AnyCompany
• routers that will support extra ASICs and WWICs
• size of DRAM and flash on each device
• routers that will support HWICs and VWICs
• system bootstrap version on each router and switch
• modules supported on the loaded Cisco IOS

15. A new Cisco IOS version has been copied into flash from a TFTP server. When a reload is issued to upgrade the Cisco IOS, the router freezes part of the way through the loading process. What could be the problem?
• There is enough flash but not enough RAM in the router.
• The new HWIC cards have not been installed yet.
• The TFTP server needs to be present during a reload.
• The new Cisco IOS should have been loaded into NVRAM.
• The new bootstrap version is not compatible with the original version on the router.

16. Refer to the exhibit. A network designer has no documentation and is attempting to create a logical diagram of the network using the output from show commands. What can be determined from the output shown?
• The device with the ID of ISP is a router on the Internet.
• The attached switch is a VTP server in the Toronto domain.
• The designer cannot telnet to the attached switch.
• The Cisco router IOS supports enterprise-level voice and video technologies.

17. A production router is reloaded and finishes with a Router> prompt. What three facts can be determined? (Choose three.)
• POST occurred normally.
• The boot process was interrupted.
• There is not enough RAM or flash on this router.
• A full version of the Cisco IOS was located and loaded.
• A configuration file was not located in NVRAM or from a TFTP server.
• The router did not locate the Cisco IOS in flash, so it defaulted to ROM.

18. During a site survey, the network designer noticed that people were accessing the company wireless network from the parking lot. What should be done to stop the wireless signal from radiating out into the parking lot?
• change the channel on the wireless AP
• connect the wireless AP to a firewall
• change the type of antenna attached to the AP
• move the wireless AP to a secure VLAN
• move the wireless AP to a port on a Layer 3 switch

19. A network design project includes a review of the existing network. What is the purpose of this phase of the project?
• eliminate the need for a site survey
• shorten the timeframe of the project
• lower the cost of the project by removing redundant links and devices
• determine if the number of applications used within the company can be reduced
• To determine what existing network devices require upgrades to meet the new

20. Refer to the exhibit. Based upon the Cisco IOS file naming convention, what is represented by the value ipvoicek9 listed in the IOS filename?
• version
• file format
• feature set
• hardware platform

21. Refer to the exhibit. What two items can be determined from the output? (Choose two.)
• R2 is a Cisco 2600 device.
• R2 has 22 MB of RAM installed.
• The version of the IOS is 12.3.
• Over 8 MB of NVRAM is installed.
• A new 36 MB IOS file can be installed on the device.

22. During a wireless site survey, a consultant is determining the hours of peak usage and the estimated number of users in each location. The consultant is currently in what step of the site survey process?
• the defining of customer requirements
• the identification of coverage areas
• the determining of preliminary AP locations
• the measurement of signal strength

23. Refer to the exhibit. The network administrator is attempting to install a new version of the IOS on R2. Based on the exhibited output, what are two possible reasons that the transfer failed?(Choose two.)
• The administrator did not enable TFTP on R2.
• There is not enough flash available to store the new IOS.
• Connectivity between R2 and the TFTP server was not verified.
• The copy command was incorrectly entered.
• The administrator did not verify that the TFTP server is running.

24. In which section of the Network Design Requirements document would a network consulting team detail names and IP addresses of important networking components and servers, provide network diagrams and topologies, and define strengths and weaknesses of the network?
• network requirements
• project scope
• overall project goal
• state of the network

CCNA 4 Module 9 Discovery 4.0

noreply@blogger.com (Bongradz) — Sat, 29 Nov 2008 11:02:00 +0000

1
Upon completion of a proposal, a network design team must sell their ideas to two key stakeholders. Who are these two stakeholders? (Choose two.)

Customers***

licensing boards

cabling contractors***

internal management

project implementation team

2
NetworkingCompany completes the installation of a network upgrade for a retail customer. All of the onsite tests complete successfully and the customer IT staff approves the results of the tests. The manager of the retail store contacts NetworkingCompany to inform the company that the store will not pay for the upgrade until a recently purchased software package is installed and tested on the network. Which two items that are contained in the proposal can the account manager refer to when discussing this issue with the store manager? (Choose two.)

the project scope***

the bill-of-material

the project timeline***

the terms and conditions

the business goals of the customer

the evaluation of the current network

3
Which proposal section describes the intended routing protocol, security mechanisms, and addressing for the planned network?

logical design***

physical design

executive summary

implementation plan

network requirements

4
In order to finalize a project proposal, an account manager of a networking company creates the terms and conditions section. What are two clauses that should be included in this section? (Choose two.)

cost summary***

installation steps

change order procedures***

problem resolution process

maintenance contract quotation

5
A company informs the account manager that the installation of a new edge router at the customer remote branch location cannot be done at the scheduled time because of a large order that the branch office needs to complete. As a result, the end date of the project must be adjusted to accommodate the additional time. What is the action should the account manager take?

Cancel the order for the new edge router.

Work with designer to redesign the branch network.

Instruct the technician to complete the install of the router at on the date in the contract.

Adjust the timeline documentation to show the company how the delay will affect the project completion date.***

6
Which statement describes a phased installation into an existing network?

A phased installation generally takes less time and expense than a green-field installation.

A phased installation is not suitable for large, multi-site network installations or upgrades.

A phased installation requires detailed planning in order to avoid disruption of user services.***

A phased installation involves building an entire replacement network and migrating users over to it.

7
The NetworkingCompany team is tasked to prepare an implementation schedule for a customer. It is determined that the new firewalls and wireless controllers that are specified in the design cannot be delivered and installed within the agreed upon time frame. The NetworkingCompany informs the customer of the problem. What two options can the NetworkingCompany team take to ensure the success of the project? (Choose two.)

plan to add additional staff and resources to shorten the installation time after the new equipment is delivered***

eliminate redundancy in the design to reduce the amount of equipment that is needed

renegotiate a new time frame with the customer to accommodate the delay***

delay the installation of the security devices and controllers until a later time

redesign the network to use only readily available equipment and software

8
A network installation team is assigned to replace all core switches in an existing data center. No other upgrades are planned. Which kind of installation is this?

a new installation

a fork-lift installation

a phased installation***

a green field installation

9
What two items are typically included in the executive summary of a proposal? (Choose two.)

project scope summary***

high-level implementation plan

quotes for all needed equipment

technical requirements for the design

emphasis on the benefits that meet the goals of the customer***

10
Included in a Bill of Materials (BOM) for a SOHO wired implementation is a Cisco 2811 router, Catalyst 2560 switch, four PCs, three laptops, and a networked printer. Wireless LAN capability will be implemented on this network. Which two equipment types must be added to the BOM to implement this request? (Choose two.)

DNS server

LAN switch ***

wireless NICs

DHCP server

wireless access points***

11
An upgraded version of the Cisco IOS has been purchased. However, the CD arrived damaged. How will this loss be covered?

a hardware warranty

a software warranty

the Cisco SMARTnet Service***

an additional service contract

12
The operation of a new branch location network is delayed because a VPN cannot be configured and established between the branch location and the main office. It is determined that the router at the main office does not have enough memory and does not have the correct Cisco IOS version image to support the VPN features. To prevent this delay, this problem should have been identified and corrected during which part of the design project?

the preparation of the business case

the prioritizing of the technical goals

the characterization of the existing network***

the implementation of the approved design

13
AAA Financial Services Company is performing implementation planning for a core switch upgrade. The company has 200 financial software programmers that work billable hours during the week. They have critical, scheduled money transfer transmissions that occur at hourly intervals every night. There are two, two-hour long IT maintenance windows scheduled for software upgrades, one on Saturday and one on Sunday. The bank advertises online banking as available 24 hours on business days and 21 hours on the weekends. However, a network upgrade that is necessary to replace some switches is expected to take four hours. Because of rack constraints, this time includes three hours to remove the old switches before the new switches can be installed and one hour to test the logical configuration. How should the implementation scheduling be handled?

Defer the software upgrades. Use the Saturday window to perform the hardware installation. Use the Sunday window to perform the logical testing.

Coordinate and publish a separate four-hour downtime during Friday to perform the complete switch installation and testing process. Use the Saturday and Sunday windows to correct any outage problems after the Friday window.

Coordinate and publish two, four-hour downtimes incorporating the published Saturday and Sunday windows. Defer any software upgrades until the new network is proven to be working correctly with the old software. Use the Sunday window as a fallback scheduling period if there are problems necessitating backing out of the Saturday window.

Coordinate and publish an eight-hour downtime incorporating the Saturday window. This will allow four hours for installation and logical testing, one hour for troubleshooting and decision, and three hours to roll back to the previous configuration if the new switching cannot pass the logical testing. Defer any software upgrades until the new network is proven to be working correctly with the old software. ****

14
A customer has just taken delivery of a Cisco 2811 router and Catalyst 3560 switch. Included with the purchase is the SMARTnet Service. Which two resources are included with SMARTnet Service? (Choose two.)

signature file updates

technical support from TAC***

maintenance releases for OS

software application major releases***

software application maintenance and minor releases

15
What service is provided Cisco standard warranty?

software application maintenance

replacement of defected hardware***

next business day delivery of replacement parts

access to the Cisco Technical Assistance Center (TAC) 24 hours a day, 7 days a week

16
What are two important guidelines when creating a slide presentation for a meeting with a customer? (Choose two.)

Use all capital letters on words and phrases when possible for added emphasis.

Provide varied background graphics to enhance viewer interest.

Use contrasting colors for background and text to aid visibility.***

Change fonts frequently to denote differences in subject matter.

Use bulleted text to lead the discussion.****

17
Which two statements describe factors that influence the layout of a proposal? (Choose two.)

Proposal layouts are required to use sans serif typefaces.

A specific proposal layout is followed when one is specified in the RFP. ***

A designer chooses the layout if a written RFP does not specify an outline.***

The software that is used to create the proposal dictates the proposal layouts.

Proposal layouts are required to use a format that is designed by the network engineer.

18
Which occurrence would indicate a failure of the design phase?

The incorrect model switches were ordered.

There is no customer signoff for task completion.

New requirements are identified after implementation begins.

The new network capacity is inadequate to support required traffic.***

19
Which two items will a systems engineer include in an implementation plan? (Choose two.)

references to design documents

the business goals of the customer***

diagrams of the existing traffic flows***

the steps to install and test the network

cost of each network device and component

20
A Cisco 1841 router has been purchased without an agreement for SMARTnet Service. What two items are guaranteed under the standard warranty? (Choose two.)

access to TAC

replacement of defective physical media***

advanced replacement of hardware parts

access to a renewable standard warranty contract

under normal use, replacement of defective hardware***

CCNA 4 Module 7 Discovery 4.0

noreply@blogger.com (Bongradz) — Sat, 29 Nov 2008 09:56:00 +0000

1. A network engineer has decided to pilot test a portion of a new network design rather than rely on a prototype for proof-of-concept. What are two advantages of pilot testing a design concept?(Choose two.)
• The test network experiences real-world network traffic.
• Users within the enterprise are not affected by the test.
• Network response can be tested in unplanned and unpredictable situations.
• Unlikely failure conditions can be conveniently tested.
• Network response can be tested in a highly controlled simulated environment.

2. While preparing a network test plan document, a network designer records all initial and modified device configurations. Which section of the document typically contains this information?
• Appendix
• Test Procedures
• Test Description
• Actual Results and Conclusions
• Anticipated Results and Success Criteria

3. Refer to the exhibit. A network designer creates a test plan that includes the specification shown. In which section of the test plan would this specification be found?
• Test Description
• Test Procedures
• Design and Topology Diagram
• Actual Results and Conclusions
• Anticipated Results and Success Criteria

4. What OSI model Layer 2 security measure can a network engineer implement when prototyping network security?
• a firewall at the network edge
• port security at the access design layer
• port security at the distribution design layer
• IP access control lists at the access design layer

5. How do designers decide which network functions need to be included in the prototype test?
• They select the functions that align with the business goals.
• They select the functions that occur at the network core.
• They select the functions that do not exist in the existing network.
• They select the functions from a list of generic network operations.

6. Refer to the exhibit. During prototype testing of the Cisco network shown, connectivity must be verified. Assuming all connections are working and CDP is enabled on all devices and interfaces, on which device was the command issued?
• R1
• S1
• R3
• S2
• R5
• S3

7. Refer to the exhibit. During prototyping, Layer 2 functionality is being tested. Based on the output shown, which two pieces of information can be determined? (Choose two.)
• Switch1 is the root bridge.
• Interface Fa0/2 on Switch1 has no role in the operation of spanning tree.
• Interface Fa0/2 on Switch1 is the alternate port used to reach the root bridge.
• Based on the entries in the "Role" column, it can be concluded that RSTP has been implemented.
• Interface Fa0/1 on Switch1 is the forwarding port selected for the entire spanning-tree topology.

8. What Rapid Spanning Tree Protocol (RSTP) state is given to the forwarding port elected for every switched Ethernet LAN segment?
• root
• backup
• alternate
• designated

9. Refer to the exhibit. During prototype testing, verification of VLAN connectivity is being performed. Based on the information shown, what command produced the output?
• show spanning-tree
• show interfaces trunk
• show cdp neighbors
• show interfaces
• show ip interface brief

10. Switch port Fa0/24 was previously configured as a trunk, but now it is to be used to connect a host to the network. How should the network administrator reconfigure switch port Fa0/24?
• Use the switchport mode access command from interface configuration mode.
• Enter the switchport nonegotiate command from interface configuration mode.
• Administratively shut down and re-enable the interface to return it to the default.
• Enter the no switchport mode trunk command in interface configuration mode.
• Use the switchport access vlan vlan number command from interface configuration mode
• to remove the port from the trunk and add it to a specific VLAN.

11. Refer to the exhibit. The redundant paths are of equal bandwidth and EIGRP is the routing protocol in use. Which statement describes the data flow from Server to PC2?
• EIGRP load balances across the R3 to R1 and R3 to R2 links.
• EIGRP load balances across the R1 to Switch3 and R2 to Switch3 paths.
• EIGRP load balances across the Switch1 to Switch3 and Switch1 to Switch2 paths.
• EIGRP does not load balance in this topology.

12. A network designer needs to determine if a proposed IP addressing scheme allows efficient route summarization and provides the appropriate amount of scalability to a design. What is useful for validating a proposed hierarchical IP addressing scheme?
• NBAR
• a pilot network
• a route summary
• a network simulator
• a physical topology ma

13. In the router command encapsulation dot1q 10, what does the number 10 represent?
• the metric used for a particular route
• the number of the VLAN associated with the encapsulated subinterface
• the priority number given to the device for the election process
• the number that must match the Fast Ethernet subinterface number
• the number used to program the router for unequal cost path load balancing

14. Refer to the exhibit. The users on the 192.168.10.192 network are not allowed Internet access. The network design calls for an extended ACL to be developed and tested. Where should the ACL be placed for the least effect on other network traffic?
• inbound on Fa0/0 of R3
• outbound on Fa0/0 of R3
• inbound on Fa0/1 of R3
• outbound on Fa0/1 of R3
• inbound on Fa0/1 of R2
• outbound on S0/0 of R2

15. Refer to the exhibit. What two measures can be taken to address the areas of weakness circled in the network design? (Choose two.)
• Provide redundant connections to all end users.
• Add another core switch to increase redundancy.
• Add a switch in the server block connecting the server farm to each core switch.
• Add an additional switch to the DMZ and direct links from the new switch to the core switches.
• Provide a redundant firewall router connecting to a second ISP, the core switches, and the DMZ.

16. Why is it important to record baseline measurements of a prototype network?
• Test results show security weaknesses after the baseline tests are run.
• The baseline is the point at which the network is operating at its fullest potential.
• Baseline measurements define a point at which network traffic has exceeded the designed capabilities of the network.
• Test results are compared to the baseline to see how the test conditions increase processor use or decrease available bandwidth.

17. Refer to the exhibit. A network administrator has been given the task of creating a design for a temporary classroom building that is to be set up outside an overcrowded school. In testing the prototype, it is found that the student PC cannot ping the teacher PC. All the switch interfaces are active and connected properly, as is interface Fa0/0 of the router. Given that only the commands shown have bee added to the router configuration, what is the source of the problem?
• The IP settings on the student PC are incorrect.
• The default gateway on the teacher PC is misconfigured.
• The router Fa0/0 interface has not been configured as a VLAN trunk.
• The Fa0/0 physical interface has not been configured with an IP address and subnet mask.
• The administrator forgot to configure a routing protocol to allow the ping packets to reach the teacher PC subnet.

18. Refer to the exhibit. Why are interfaces Fa0/11, Fa0/23, and Fa0/24 not shown in this switch output?
• Interfaces Fa0/11, Fa0/23, and Fa0/24 are trunks.
• Interfaces Fa0/11, Fa0/23, and Fa0/24 are shutdown.
• Interfaces Fa0/11, Fa0/23, and Fa0/24 are blocking.
• Interfaces Fa0/11, Fa0/23, and Fa0/24 failed diagnostics

19. Refer to the exhibit. A network technician is performing an initial installation of a new switch in the east wing. The technician removes the switch from the box, makes the connections to the network, and adds the configuration shown. The technician notifies the network administrator that the switch has been installed. When the network administrator at the home office attempts to telnet to the switch from host 192.168.0.1, the connection fails. What action should the network technician take?
• Add an enable password to the switch.
• Add a default gateway to the switch configuration.
• Configure the switch with an IP access list to permit the host connection.
• Enable the physical interfaces of the switch with the no shutdown command.

20. Refer to the exhibit. After all the interfaces have stabilized, what is the spanning-tree state of all the enabled interfaces of SW11?
• discarding
• forwarding
• learning
• listening

CCNA 4 Module 8 Discovery 4.0

noreply@blogger.com (Bongradz) — Sat, 29 Nov 2008 09:54:00 +0000

1. Which mechanism is used to create a floating static route?
• administrative distance
• cost
• hop count
• passive interface

2. IPSec operates at which layer of the OSI model?
• application
• network
• datalink
• transport

3. Which is true regarding Frame Relay LMI?
• There are three LMI types standardized by ANSI, ITU-T, and Cisco.
• Routers at each end of a Frame Relay virtual circuit must always use the same LMI type.
• The LMI type must be manually configured.
• The only function of LMI is to verify the connection between the router and the Frame Relay switch.

4. Which statement identifies the IP address design for subinterfaces that are configured for a Frame Relay network?
• Multipoint configurations require the IP address of each subinterface on each router to be in its own subnet.
• Multipoint configurations require IP addresses for each subinterface on each router to be a part of the same subnet.
• Point-to-point configurations require IP addresses for each subinterface on each router to be a part of the same subnet.
• Point-to-point configurations do not require IP addresses on each subinterface on each router.
• Multipoint configurations do not require IP addresses on each subinterface on each router.

5. Which three algorithms can be used to encrypt user data in an IPSec VPN framework? (Choose three.)
• 3DES
• AES
• Diffie-Hellman
• DES
• ESP
• SHA

6. Which flag is set by a Frame Relay switch to inform the receiving station that congestion was experienced?
• BECN
• DE
• FECN
• FCS

7. Refer to the exhibit. The complete configuration of a Frame Relay interface on the Chicago router is shown. How does the Chicago router know which DLCI is mapped to the IP address of the remote router?
• DE
• CIR
• FECN
• Inverse ARP

8. What statement correctly defines the purpose of the split horizon rule?
• marks the route unreachable in a routing update that is sent to other routers
• prevents routers from advertising a network through the interface from which the update came
• prevents routers from accepting higher cost routes to networks previously marked as inaccessible before the timer expires
• limits the number of hops a packet can traverse through the network before it should be discarded

9. Which PVC status suggests that the router recognizes the DLCI configured on its interface as being present on the Frame Relay switch, but the PVC associated with the DLCI is not capable of end-to-end communication?
• active
• deleted
• inactive
• idle

10. Refer to the exhibit. Which router command is used to associate a Layer 2 address with the corresponding Layer 3 address?
• Miller(config-if)#frame-relay map ip 172.16.150.1 110
• Miller(config-if)#frame-relay map ip 172.16.150.1 112
• Miller(config-if)#frame-relay map ip 172.16.150.2 110
• Miller(config-if)#frame-relay map ip 172.16.150.2 112

11. A network administrator issued the command show frame-relay pvc. The response from the router shows the status of a PVC as deleted. What is the reason for this status?
• The DLCI is using the wrong LMI type.
• The DLCI is usable but has little activity.
• The DLCI is programmed in the switch but the circuit is not usable.
• The DLCI configured on the CPE device does not match the DLCI.

12. What is one benefit of using a network simulation software package?
• The network design can be tested before it is actually implemented.
• Simulation software packages are quickly updated to support new network technologies and devices.
• Simulated devices have the same features as actual devices, allowing for detection of all potential problems.
• Software packages can simulate all possible network traffic conditions, giving an accurate prediction of network performance.

13. What are two components a network designer considers when planning a VPN? (Choose two.)
• encryption algorithm for privacy and security
• encapsulation protocol to use when creating the VPN tunnel
• switching technology to optimize VPN WAN throughput
• tunneling technology for guarding against data corruption
• routing protocol on the gateway for optimum performance

14. When identifying VPN requirements for endpoint users, what care must be taken to protect the network when remote users log in from unsecured public locations?
• Ensure that the user has VPN client software that allows access to all internal resources.
• Ensure that the VPN user traffic does not slow down internally sourced traffic on the network.
• Ensure that there are no obstacles to hamper the users from accessing all internal resources.
• Ensure that remote users can only access network resources that are appropriate to their job function.

15. Which two components are key elements when implementing a VPN? (Choose two.)
• concentration
• encryption
• prioritization
• compression
• encapsulation

16. What tool can help ease the configuration of VPN servers on routers?
• Cisco SDM
• PIX Firewall
• Cisco VPN Concentrator
• Cisco Adaptive Security Appliances

17. What is used to identify the path to the next frame-relay switch in a Frame Relay network?
• CIR
• DLCI
• FECN
• BECN

18. Which two statements are true regarding VPN security? (Choose two.)
• Users may only establish a VPN connection from secure locations and never from public areas.
• Users that connect to a network through a VPN do not have to log in to resources on the network.
• Users that connect to a network through a VPN are are considered trusted users on the network.
• Users may establish a VPN connection from unsecure locations such as airports and hotel lobbies.
• Users that connect to a network through a VPN should have access to all the resources on the network.

19. Refer to the exhibit. What is placed in the address field of a frame that will travel from the Orlando office to the DC office?
• MAC address of the Orlando router
• MAC address of the DC router
• 192.168.1.25
• 192.168.1.26
• DLCI 100
• DLCI 200

20. Two directly connected routers are able to ping each other through the Serial 0/0/0 interfaces. A network administrator changes the encapsulation on one router to PPP, and the other is left at the default value. What statement would appear in the output of the show interfaces command issued on one of the routers?
• Serial 0/0/0 is up, line protocol is up
• Serial 0/0/0 is down, line protocol is down
• Serial 0/0/0 is up, line protocol is down
• Serial 0/0/0 is down, line protocol is up
• Serial 0/0/0 is administratively down, line protocol is down

21. Refer to the exhibit. What statement is true about the configuration shown for R2?
• R2 is configured as the Frame Relay switch.
• R2 is configured as the main site in a multipoint Frame Relay WAN prototype.
• R2 is configured as the main site in a point-to-point Frame Relay WAN prototype.
• R2 is configured as a remote site in a multipoint Frame Relay WAN prototype.
• R2 is configured as a remote site in a point-to-point Frame Relay WAN prototype.

22. A company uses serial interfaces on its border router to connect to branch offices through WAN connections. The security policy dictates that the encapsulation should use PPP with authentication protocol CHAP. Which statement is true about the configuration requirement of CHAP?
• Both the username and password are case sensitive.
• Neither the username nor the password is case sensitive.
• The username is case sensitive but the password is not case sensitive.
• The password is case sensitive but the username is not case sensitive.

23. Which two statements about split tunnels are true? (Choose two.)
• Local LAN printing will use the VPN tunnel.
• The traffic load on the VPN server is increased.
• Traffic to the corporate network will be encrypted.
• There is a reduced security risk to the corporate network.
• All traffic travels across the VPN tunnel from client to server.
• Traffic to public web sites and general Internet navigation is not encrypted.

24. An IP address has been assigned to the S0/0/0 interface of a new Cisco router. The administrator wishes to quickly test basic connectivity with the serial interface of an adjoining Cisco router via the use of the default WAN protocol. Which WAN protocol will be used for this test?
• PPP
• Frame Relay
• DSL
• HDLC
• ATM

25. Which two statements about split tunnels are true? (Choose two.)
• Local LAN printing will use the VPN tunnel.
• The traffic load on the VPN server is increased.
• Traffic to the corporate network will be encrypted.
• There is a reduced security risk to the corporate network.
• All traffic travels across the VPN tunnel from client to server.
• Traffic to public web sites and general Internet navigation is not encrypted.

CCNA Discovery 4

noreply@blogger.com (Bongradz) — Wed, 26 Nov 2008 10:50:00 +0000

CCNA Discovery 1 : Networking for Home and Small Business

--download--

CCNA 3 Final Exam Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:36:00 +0000

1. In which VTP mode can a switch create VLANs, ignore VTP messages, and not pass local VLAN information to other VTP domain members?
• client
• server
• pruning
• transparent

2. What are two characteristics of an extended ACL? (Choose two.)
• IP is used to specify TCP traffic only.
• IP is used to specify TCP and UDP traffic only.
• IP is used to specify all TCP/IP protocols including TCP, UDP, ICMP and routing protocols.
• Traffic can be filtered on source address only.
• Traffic can be filtered on source and destination address only.
• Traffic can be filtered on source and destination address, protocol, and specific port number.

3. Which two statements are true regarding a PPP connection between two Cisco routers? (Choose two.)
• LCP tests the quality of the link.
• LCP manages compression on the link
• Only a single NCP is allowed between the two routers.
• NCP terminates the link when data exchange is complete.
• With CHAP authentication, the routers exchange plain text passwords.

4. Assuming VLSM is not being used, what impact will adding the command ip route 172.16.64.0 255.255.240.0 serial0/0 have on a router that is already operational in a network?
• All packets with a destination address between 172.16.64.1 and 172.16.80.254 will be forwarded out serial0/0.
• All packets with a destination address between 172.16.64.1 and 172.16.255.254 will be forwarded out serial0/0.
• All packets with a destination address between 172.16.64.1 and 172.16.79.254 will be forwarded out serial0/0.
• All packets with a destination address between 172.16.0.1 and 172.16.64.254 will be forwarded out serial0/0.

5.

Refer to the exhibit. The network is using OSPF as the routing protocol. A network administrator issues the show ip ospf neighbor command to check the status of operation. Which statement is true?
• RB has the lowest priority value.
• RC and RD have the lowest router IDs on the network.
• RA has established adjacencies with all neighbor routers.
• RA and RB cannot form an adjacency because they are stuck in the 2-way state.

6. A sales representative is preparing to send sensitive information to corporate headquarters from a hotel room using the Internet. Prior to the trip, the IT staff made the necessary provisions to allow secure Internet access. What solution was implemented for the sales representative?
• VPN
• Frame Relay
• PPP with CHAP authentication
• PPP with PAP authentication

7.

Refer to the exhibit. A network administrator noticed that the VLAN configuration changes at SW2 did not propagate to SW3. On the basis of the partial output of the show vtp status command, what is the possible cause of the problem?
• VTP V2 mode is disabled.
• SW3 is configured as transparent mode.
• The number of existing VLANs does not match.
• The configuration revision number does not match.

8.

Refer to the exhibit. Because of continuing instability of one of the serial links in the OSPF network, a network administrator configures router ASBR as shown. Which two statements will be a result of this configuration? (Choose two.)
• Traffic intended for destinations across unstable serial links will be forwarded by ASBR even when the links are down
• A summary route of 192.168.0.0/22 will be advertised to the ISP router.
• Serial links in range 192.168.0.0 255.255.252.0 will be forced into a passive state.
• Networks connected to the unstable serial links will be placed in an unreachable state.
• Negative effects of route flapping will be reduced.

9. Which two criteria are used by STP to select a root bridge? (Choose two.)
• memory size
• bridge priority
• number of ports
• switch location
• switching speed
• base MAC address

10. A company is using a Class B IP addressing scheme and expects to need as many as 150 networks. What is the correct subnet mask to use with the network configuration?
• 255.255.0.0
• 255.255.240.0
• 255.255.254.0
• 255.255.255.0
• 255.255.255.128
• 255.255.255.192

11.

What is the term for the value 2172416 that is highlighted in the output of the show ip eigrp topology command?
• feasible distance of the successor
• reported distance of the successor
• feasible distance of the feasible successor
• reported distance of the feasible successor

12.

Refer to the exhibit. RIPv2 is configured in the network shown. Hosts in the network have access to all internal networks but do not have Internet access. On which router should the commands, shown in the exhibit, be added to provide Internet access for all hosts in the network?
• R1
• R2
• R3
• ISP

13. What do companies gain from the services performed at the enterprise edge?
• faster communication with server farms
• stronger security against malicious attacks
• faster communication with Internet destinations
• enhanced performance and reliability through VLANs and redundant trunk links

14.

Refer to the exhibit. A network administrator wishes to deny Internet access to all R2 LAN hosts, while allowing these hosts to reach all other devices on the company networks. Where the ACL shown in the exhibit should be placed to meet these requirements?
• R2: Fa0/0 inbound
• R1: S0/1/0 outbound
• R1: S0/0/1 inbound
• R2: S0/0/1 outbound
• R2: Fa0/0 outbound

15.

Refer to the exhibit. In what sequence (from first to last) does an OSPF router check the parameters listed when selecting the DR?
• C, B, A, D
• D, C, B, A
• A, B, C, D
• A, C, B, D
• B, C, A, D

16. What two statements are true regarding EIGRP tables? (Choose two.)
• A feasible successor route can be found in the topology table.
• A successor route can only be found in the routing table.
• The topology table shows whether a route is in the passive or active state.
• The routing table shows the amount of time elapsed since a router adjacency was formed.
• The neighbor table shows all adjacent Cisco devices.
• Administrative distance is shown as a column in the neighbor table.

17.

Refer to the exhibit. Assuming that all three routers are configured with the EIGRP routing protocol and sharing information, what information can be gathered from the show command output?
• Router B has EIGRP adjacencies with both router A and C.
• Router B has a fully converged topology table.
• Router B has not formed an adjacency with router A.
• Router B has not formed an adjacency with router C.

18. Which three statements are true about RSTP? (Choose three.)
• RSTP can fall back to STP to provide support for legacy equipment.
• RSTP and STP have the same number of port states.
• Like PortFast and UplinkFast, RSTP is a proprietary protocol.
• RSTP takes up to 50 seconds to converge.
• RSTP requires a point-to-point, full-duplex connection.
• RSTP views all ports that are not discarding as part of an active topology.

19.

Refer to the exhibit. A network support technician has been asked to set an IP address on one of the FastEthernet interfaces on a new router. What is causing the interface to reject the address?
• The IP address is already in use.
• The technician is using a network address.
• The technician is using the wrong subnet mask for /26
• The technician must enable VLSM on the interface.

20.

Refer to the exhibit. A network administrator enters the command ip route 10.10.4.16 255.255.255.248 s0/0/1 into the router. What will be the result of this configuration?
• A static route pointing to 10.10.4.16/29 is placed into the routing table.
• A static route to 10.10.4.16/29 is placed into the routing table if interface FastEthernet0/1 goes down.
• A static route pointing to 10.10.4.16/29 is only placed into the routing table if the route to 10.10.4.0 is removed.
• A static route is not placed into the routing table because a RIP route that includes the destination network already exists.

21.

Refer to the exhibit. R1 is connected to the Internet through its serial 0/0/0 interface. Hosts on the 192.168.100.0/24 LAN on R1 cannot communicate with hosts on the Internet. What two NAT configuration issues might explain this failure? (Choose two.)
• The ip nat pool command has not been applied correctly.
• The inside interface has not been defined on R1.
• The access list does not include the group of IP addresses that are supported by the inside network.
• The ip address that is assigned to the serial 0/0/0 interface is incorrect
• The outside interface has not been defined on R1.

22.

Refer to the exhibit. R1 and R2 are connected via serial interfaces. Both interfaces show that there is Layer 2 connectivity between them. The administrator verifies that CDP is operational; however, pings between the two interfaces are unsuccessful. What is the cause of this connectivity problem?
• no set loopback
• incorrect subnet mask on R2
• incompatible bandwidth
• incorrect IP address on R1
• incompatible encapsulation

23. Which two statements describe how the information contained in a BPDU is used by a switch? (Choose two.)
• to set the duplex mode of a redundant link
• to activate looped paths throughout the network
• to determine the root bridge
• to prevent loops by sharing routing tables between connected switches
• to determine which ports are placed in forwarding mode

24. When MD5 authentication is used for OSPF routing protocol authentication, what two facts are known about the key? (Choose two.)
• The key passes between routers in plain text.
• The key is used to help generate an encrypted number for authentication.
• The key passes between routers in encrypted form.
• The key is never transmitted.
• The key can be captured by using a packet sniffer.

25.

Refer to the exhibit. If router RTA fails, which statement is true?
• Hosts A and B can reach each other, but cannot reach hosts C and D or the server.
• No host can reach any other host.
• Hosts A, B, C, and D can reach each other, but cannot reach the server.
• All hosts can reach each other.

26. Which command should a network administrator issue to disable default summarization in an EIGRP network?
• Router(config-router)# null 0 route
• Router(config-if)# no ip summary-address
• Router(config-router)# no ip summary-address
• Router(config-if)# no auto-summary
• Router(config-router)# no auto-summary

27.

Refer to the exhibit. Users on the 172.30.20.0/24 network are unable to access any of the servers located on the 192.168.0.0/23 network. Given the network topology and OSPF configuration, what two problems exist in this network? (Choose two.)
• There is a routing loop occurring between all three routers.
• There is a network statement missing.
• Network 172.30.20.0 has an incorrect wildcard mask.
• The OSPF Area configuration is incorrect.
• /23 is an invalid subnet mask for the 192.168.0.0 network.

28.

Refer to the exhibit. Which IP addressing scheme would be correct for the network?
• H1-172.18.0.10/16
H2-172.18.0.11/16
H3-172.18.0.12/16
• H1-172.18.0.10/16
H2-172.19.0.10/16
H3-172.18.0.11/16
• H1-172.18.0.10/16
H2-172.18.0.11/16
H3-172.19.0.11/16
• H1-172.18.0.10/16
H2-172.19.0.11/16
H3-172.19.0.11/16

29.

Refer to the exhibit. An administrator is adding a new router to the network. The IP address 192.168.13.6/30 has been assigned to the connecting serial interface on R2. What IP address must the administrator assign to the serial interface of the new router?
• 192.168.13.4/30
• 192.168.13.5/30
• 192.168.13.7/30
• 192.168.13.58/30
• 192.168.13.61/27
• 192.168.13.63/27

30. After comparing a previous baseline to current network statistics, the network engineer has discovered a significant increase in unwarranted traffic to the extranet. Which two steps simplify administration and control the unwanted traffic? (Choose two.)
• define an ACL at the distribution layer to isolate packets
• add an ACL at the router in the enterprise edge to block the traffic
• deploy a Layer 3 switch to contain broadcasts
• connect remote locations directly to the intranet
• configure all hosts with the same default gateway to eliminate unnecessary broadcasts
• deploy one core ISP router to reduce the delay in path determination

31. Which statement is accurate about the CIR in Frame Relay?
• It is important to purchase a CIR that matches the highest bandwidth requirements of the enterprise.
• The CIR can be no lower than the port speed of the local loop.
• The CIR defines the contracted maximum rate available from the service provider on the Frame Relay circuit
• It is possible to burst over the CIR if bandwidth is available.

32. A sales representative is using a wireless connection to make a VoIP call. Which protocol will be used to transport the voice packets?
• TCP
• UDP
• PPP
• HDLC

33. A network administrator wants to deny responses to ping requests. Which ACL statement denies ping responses while not affecting other traffic?
• access-list 123 deny tcp any any eq 80
• access-list 123 deny tcp any any eq 20
• access-list 123 deny tcp any any eq 21
• access-list 123 deny icmp any any echo-reply
• access-list 101 deny tcp any any established

34. Why would a network administrator want to limit the size of failure domains when designing a network?
• to eliminate the effects of Ethernet collisions
• to reduce the impact of a key device or service failure
• to reduce the impact of Internet congestion on critical traffic
• to eliminate the need to block broadcast packets at the edge of the local network

35. What are two benefits of implementing VLANs in an enterprise network? (Choose two.)
• eliminates the need for a Layer 3 device
• provides segmentation of broadcast domains
• allows for the propagation of broadcasts from one local network to another
• allows for the logical grouping of devices despite physical location
• prevents issues such as broadcast storms by ensuring a loop free environment

36. Which three IP addresses are valid host addresses in the 10.200.0.0/20 network? (Choose three.)
• 10.200.11.69
• 10.200.16.1
• 10.200.0.255
• 10.201.0.55
• 10.200.15.240
• 10.200.30.29

37.

Refer to the exhibit. Assuming that the RIPv1 routing protocol is enabled and that all networks are being advertised, which statement is true?
• All packets from H1 that are destined to H2 will arrive at H2.
• None of the packets from H1 that are destined to H2 will arrive at H2.
• Approximately half the traffic from H1 that is destined to H2 will reach R3.
• Some of the packets from H1 that are destined to H2 will be sent to the switch that is connected to network 192.168.3.64/26.

38.

Refer to the exhibit. Which route will appear in the routing table?
• R 10.10.4.0/24 [120/1] via 10.10.10.1, 00:00:12, FastEthernet0/1
• R 10.10.4.0/24 [120/1] via 10.10.20.1, 00:00:12, FastEthernet0/0
• R 10.10.4.0/24 [120/2] via 10.10.20.1, 00:00:12, FastEthernet0/0
• R 10.10.4.0/24 [120/3] via 10.10.30.1, 00:00:12, FastEthernet1/0
• R 10.10.4.0/24 [120/1] via 10.10.30.1, 00:00:12, FastEthernet1/0

39.

Refer to the exhibit. Server7 has been added to the server farm network. The hosts can ping Servers 2 and 3 and Server2 and Server3 can ping each other. Server7 cannot ping the other servers connected to the switch. What is the cause of this problem?
• The Fa0/1 port on the switch should be in access mode.
• The switch IP address is not on the same subnet as Server7.
• The switch port used for Server7 is not in the same VLAN as Server2 and Server3.
• The Fa0/0 interface of the router has not been configured for subinterfaces to support inter-VLAN routing.

40. What will be the two wildcard masks required in an extended access list statement that blocks traffic to host 192.168.5.45 from the 172.16.240.0/27 network? (Choose two.)
• 0.0.0.0 5
• 255.255.240.0
• 255.255.255.255
• 0.0.31.255
• 255.255.255.240
• 0.0.0.31

41. If a modem is being used to connect to an ISP, which WAN connection type is being used?
• leased line
• cell switched
• circuit switched
• packet switched

42.

Refer to the exhibit. A network administrator must manually summarize all IP addresses on the POP router for the ISP. Which one is the correct summary address?
• 192.168.0.0/22
• 192.168.0.0/23
• 192.168.0.0/24
• 192.168.0.0/25

43.

Refer to the exhibit. OSPF is enabled and the network has completely converged. Which two routers will be designated as DROTHER routers? (Choose two.)
• R1
• R2
• R3
• R4

44.

Refer to the exhibit. What two conclusions can be drawn from the displayed output? (Choose two.)
• A packet with a destination IP address of 172.20.1.14 will exit the router via the Serial 0/1/0n interface.
• The default administrative distance for EIGRP has been changed.
• Network 172.20.1.4 can be reached through two possible routes of equal cost.
• The addresses on this network were created using VLSM.
• The router connected to Serial 0/1/1 is advertising four separate routes through EIGRP to this router.

45.

Refer to the exhibit. What two pieces of information can be gathered from the output of this command? (Choose two.)
• 172.16.16.0/20 is a manually summarized route.
• All subnets are being advertised because default summarization was disabled.
• The output verifies that EIGRP is advertising only the networks in the same AS.
• The 172.16.1.0/24 network is directly attached to the router that produced this output.
• The Null0 interface indicates that this is not an actual path, but a summary for advertising purposes.

46.

Refer to the exhibit. What three facts represent the result of DR and BDR elections in this OSPF network? (Choose three.)
• RTC will be the DR of 10.5.0.0/30
• RTD will be the BDR of 10.5.0.0/30.
• RTD will be the DR of 10.4.0.0/28.
• RTB will be the BDR of 10.7.0.0/28.
• RTB will be the DR of 10.7.0.0/28.
• RTA will be the BDR of 10.4.0.0/28.

47.

Refer to the exhibit. Internet access is crucial for the company network shown. Internet access is provided by two ISPs. ISP1 is the primary provider and ISP2 is the backup provider. The network administrator configures BorderR as the border router so that in normal operations, all Internet traffic goes through ISP1. However, if the link to ISP1 fails, then BorderR will automatically forward Internet traffic to ISP2. The administrator configures two default routes:
BorderR(config)# ip route 0.0.0.0 0.0.0.0 192.168.100.1 200
BorderR(config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1
However, when the administrator issued the show ip route command to verify the configuration, only the second default route is in the routing table. Why is the first default route not showing?
• The first configuration command overwrites the second command.
• The first default route will be installed into the routing table if there is traffic with an IP address that is destined for the 192.168.100.0 network.
• This is expected because the link to ISP1 is active. If the link to ISP1 goes down, then the first default route will be installed into the routing table.
• The first default route cannot be installed into the routing table unless the administrator manually disables the second default route with the no ip route 0.0.0.0 0.0.0.0 172.16.1.1 command.

48.

Refer to the exhibit. If R4 is announcing all shown internal networks as a summary address to the ISP, which summary address will be most specific?
• 192.168.1.0/22
• 192.168.4.0/21
• 192.168.6.0/23
• 192.168.8.0/21
• 192.168.4.0/22

49. Which two statements are true about the native VLAN on a switch? (Choose two.)
• It requires a special VLAN ID tag.
• It is unable to be changed to a different VLAN.
• Untagged traffic slows the switching process down
• The native VLAN defaults to VLAN 1 on Cisco Catalyst switches.
• Untagged frames that are received on a trunk become members of this VLAN

50.

Refer to the exhibit. A company has recently installed a new switch (S2) into their network.After several minutes, the network administrator notices that the new VLAN information is not being propagated to the new switch. Given the show vtp status command output, what is the possible problem that prevents the information from being received by the new switch?
• VTP version mismatch
• VTP domain name mismatch
• VTP revision number mismatch
• Time synchronization problems

51.

Refer to the exhibit. All routes in the exhibit are available to a router. Which two routes will be placed into the routing table? (Choose two.)
• A
• B
• C
• D
• E
• F

52.

Refer to the exhibit. What is the purpose of the command: RouterA(config)# access-list 1 permit 192.168.16.0 0.0.0.255?
• It identifies traffic on all inside interfaces to be translated and given access to the ISP router.
• It identifies traffic from the fa0/1 interface to be translated and given access to the ISP router.
• It allows traffic from the ISP to reach all of the inside interfaces.
• It identifies traffic from the fa0/0 interface to be translated and given access to the ISP router
• It allows traffic from the ISP router to the fa0/1 interface.

53. The headquarters of a corporation uses static routes to connect to three branch offices. What are two advantages of using static routes for the WAN connections? (Choose two.)
• Static routes are more secure.
• Static routes converge faster.
• Static routes have higher administrative distances than dynamic routing protocols.
• The metrics of a static route need adjusting only if the bandwidth of the WAN connection changes.
• They are more stable and less susceptible to network changes in the interior gateway protocol.

54. What are two ways VLAN memberships can be created in an enterprise network? (Choose two.)
• manually configuring the switch ports to be part of a VLAN
• allowing the user to choose a specific VLAN through a GUI menu
• configuring the switch to allow VLAN membership based on NetBIOS association
• implementing an access list that specifies which devices are placed into specific VLANs.
• associating MAC addresses to specific VLANs in a VLAN management policy server database
• manually configuring the host devices to be part of a VLAN

55. Which two statements are true about RIPv1 and RIPv2? (Choose two.)
• Both versions broadcast updates on port 520.
• Both versions send the subnet mask as part of the update.
• By default, both versions will receive RIPv1 and RIPv2 updates.
• Both versions support the features of split horizon and poison reverse
• By default, both versions automatically summarize routes.
• RIPv1 has a higher AD than RIPv2 has.

56. Which bandwidth allocation technique minimizes bandwidth waste by reallocating unused time slices to communicating users?
• VPN
• NCP
• TDM
• STP
• STDM

57.

Refer to the exhibit. What is represented by the Null0 route for the 128.107.0.0 network?
• a child route that is defined
• a parent route that is defined and sourced from a physical interface
• a summary route for advertising purposes, not an actual path
• the result of the no auto-summary command on a router

58. If an authentication protocol is configured for PPP operation, when is the client or user workstation authenticated?
• prior to link establishment
• during the link establishment phase
• before the network layer protocol configuration begins
• after the network layer protocol configuration has ended

CCNA 3 Module 9 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:35:00 +0000

1.

Refer to the exhibit. Based on the output shown, to which IP network should the workstations in the Support department belong?
• 192.168.1.0
• 172.16.1.0
• 172.16.3.0
• 172.16.5.0

2.

Refer to the exhibit. A network administrator is doing proactive network maintenance. The administrator pings 192.168.1.100 and compares the results to the baseline data. Based on the comparison of the two pings, what is one possibility?
• There is an ACL applied, making the destination host unreachable.
• There is a malfunctioning NIC on the destination host.
• The sending host is unable to access the network.
• There are congestion problems on the network.

3.

Refer to the exhibit. Given the output generated by the debug ppp negotiation command, which statement is true?
• The line protocol of the local router is now up.
• The username ’Goleta’ is configured locally.
• The command ppp authentication pap is configured on both routers.
• The local router requested to terminate the session.

4. What is important to consider while configuring the subinterfaces of a router when implementing inter-VLAN routing?
• The subinterface numbers must match the VLAN ID number.
• The physical interface must have an IP address configured.
• The IP address of each subinterface must be the default gateway address for each VLAN subnet.
• The no shutdown command must be given on each subinterface.

5.

Refer to the exhibit. A lab technician connects two routers together via a serial cable using the default interface configuration values. The interfaces are up; however, the technician is unable to ping between the two devices. What is the most likely problem?
• The lab technician used the wrong cable to connect the serial ports.
• There is an IP mismatch between the serial ports.
• There is an encapsulation mismatch between the serial ports.
• No clock rate has been set on the DCE interface.

6.

Refer to the exhibit. Based on the output shown, why is VTP information unable to propagate the network?
• One of the two client mode switches must be reconfigured to Transparent mode.
• Each switch must be synchronized to the network time server.
• The VTP domain names are different.
• VTP passwords must be set.
• The configuration revision numbers are all the same.

7. The enterprise mail server software recently went through a minor update. A network administrator notices an excessive amount of traffic between a database server and the newly updated mail server, compared to the baseline data. What is the first action the administrator should do to investigate the problem?
• Wait to see if the recent update will stabilize after a while.
• Redo the baseline data to include the minor upgrade.
• Check the log to see what software components are producing the excess traffic.
• Check for viruses and spyware on the database server.

8.

Refer to the exhibit. Users are reporting that they cannot access the Internet. Routers R1 and R2 are configured with RIP version 2 as shown. If R2 receives a packet with a destination address on the Internet, how is the packet routed?
• The packet is routed to the ISP router and then to network 10.1.1.0/24.
• The packet is routed to the ISP router and then to the Internet.
• The packet is routed to R1 and then forwarded out Fa0/0 on R1.
• The packet will not be routed because R2 does not have a valid default route.

9.

Refer to the exhibit. Both routers are configured using RIPv1. Both routers are sending updates about the directly connected routes. R1 can successfully ping the serial interface of R2. The routing table on R1 does not contain any dynamically learned routes from R2, and the routing table on R2 shows no dynamically learned routes from R1. What is the problem?
• Subnetting is not supported by RIPv1.
• One of the routers needs a clock rate on the serial interface.
• The serial link between the two routers is unstable.
• VLSM is not supported by RIPv1.

10.

Refer to the exhibit. Host 192.168.1.14 is unable to download email from 192.168.2.200. After reviewing the output of the show running-config command, what problem is discovered?
• Access to the SMTP server is denied.
• The destination host address in an ACL statement is incorrect.
• The ACL is applied to the interface in the wrong direction.
• The implicit deny any any is blocking all access to email.

11. An employee called the help desk to report a laptop that could not access a web-based application on the Internet. The help desk technician asked the employee to open a Windows command prompt and type the ipconfig /all command. Which problem-solving technique did the technician choose?
• top-down
• bottom-up
• substitution
• divide-and-conquer

12.

Refer to the exhibit. Based on the network diagram and the output shown, which statement is true?
• The command was entered on router R1.
• The command was entered on router R2.
• The command was entered on router R3.
• The command could have been entered on either R1 or R2.

13.

Refer to the exhibit. An ACL is configured to prevent access by network 192.168.1.0 to network 192.168.2.0, but it is not working properly. What problem is discovered after observing the output of the show running-config command?
• The protocol type specified in the ACL should be TCP, not IP.
• The source and destination addresses are reversed in the statement.
• The ACL is applied to the wrong interface, but the right direction.
• The ACL is applied to the wrong interface and the wrong direction.
• The permit ip any any statement allows network 192.168.1.0 access.

14.

Although all networks are reachable, the network administrator notices abnormal routing behavior after configuring OSPF on each router. According to the partial output from the debug ip ospf events command, which statement is true about the contents of the routing table in RA?
• It will show network 172.16.3.0 learned from RB.
• It will show network 172.16.3.0 learned from RC.
• It will show two equal routes to network 192.168.1.4/30.
• It will show two equal routes to network 192.168.1.8/30.

15. A network at a large building failed, causing a severe disruption in business activities. The problem was eventually detected and resolved by replacing a piece of failed network equipment. Investigation led to the conclusion that a network design problem was the main cause of the disruption. Loss of a single piece of equipment should not have been able to cause such a large problem. What two terms best describe this type of design weakness? (Choose two.)
• bottleneck
• limited availability
• limited scalability
• large failure domain
• single point of failure
• limited staff capabilities

16.

Refer to the exhibit. The network administrator is troubleshooting the connectivity issue between RA and RB. According to the partial configuration, what is the cause of the problem?
• password mismatch for PPP authentication
• username mismatch for PPP authentication
• encapsulation method mismatch for PPP authentication
• authentication method mismatch for PPP authentication

17.

Refer to the exhibit. ABC Company is using the 172.16.0.0/18 network. It is standard company practice to use the first 50 addresses for switches and servers and assign the last usable address to the router. The remaining addresses are assigned to the hosts. After assigning the addresses, the network technician tests connectivity from the host above and is not able to ping the router. What could be the problem?
• The router was assigned the broadcast address.
• The host is not in the same subnet as the switch and router.
• The router interface is in the wrong subnet.
• The host was assigned a network address.

18.

Refer to the exhibit. A network administrator is troubleshooting a problem. No users are able to access the 10.10.2.0/24 network, but are able to access all other networks. Assuming R3 is configured correctly and based on the output shown, what is most likely the problem?
• There is congestion on the 10.10.2.0 network.
• The EIGRP process number on R2 is incorrect.
• The Fa0/0 interface on R2 is shut down.
• The Fa0/0 interface on R2 has an incorrect IP address or subnet mask.

19.

Refer to the exhibit. The network administrator correctly configures RTA to perform inter-VLAN routing. Using the show vlan command, the administrator verifies that port Fast Ethernet 0/4 is the first available port in the default VLAN on SW2. The administrator connects RTA to port 0/4 on SW2, but inter-VLAN routing does not work. What could be the possible cause of the problem with the SW2 configuration?
• Port 0/4 is not active.
• Port 0/4 must be a member of VLAN1.
• Port 0/4 is configured in access mode.
• Port 0/4 is configured as a trunk port.

20.

Refer to the exhibit. The network administrator is unable to ping from the console of router R3 to host 10.10.4.63. What is the problem?
• RIPv1 does not support VLSM.
• Router R2 does not have RIP correctly configured.
• Router R3 is missing a network statement for network 10.0.0.0.
• There is an addressing problem on the link between routers R2 and R3.

21.

Refer to the exhibit. A network administrator has implemented subnetting using the network 192.168.25.0 and a /28 mask. Workstation 1 is not able to ping with Workstation 2. What is a possible cause for this lack of communication?
• Workstation 1 and Workstation 2 are on the same subnet.
• The serial connections are using addresses from the LAN subnets.
• All hosts in the network must be in the same subnet to communicate.
• Workstation 1 is not on the same network that the RTA router LAN interface is on.

22. Which two statements describe when a network administrator should perform a network baseline? (Choose two.)
• It should be done monthly as a minimum standard.
• It should be performed when all switch Cisco IOS versions are upgraded.
• It should be done when all network printers are upgraded to a new model.
• It should be done when the network is performing at normal activity levels.
• It should be done whenever an SLA has been signed with a new service provider.

CCNA 3 Module 8 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:33:00 +0000

1.

Refer to the exhibit. A network administrator needs to add the command deny ip 10.0.0.0 0.255.255.255 any log to R3. After adding the command, the administrator verifies the change using the show access-list command. What sequence number does the new entry have?
• 0
• 10, and all other items are shifted down to the next sequence number
• 50
• 60

2.

Refer to the exhibit. What happens if the network administrator issues the commands shown when an ACL called Managers already exists on the router?
• The new commands overwrite the current Managers ACL.
• The new commands are added to the end of the current Managers ACL.
• The new commands are added to the beginning of the current Managers ACL.
• An error appears stating that the ACL already exists.

3. Why are inbound ACLs more efficient for the router than outbound ACLs?
• Inbound ACLs deny packets before routing lookups are required.
• Inbound ACL operation requires less network bandwidth than outbound.
• Inbound ACLs permit or deny packets to LANs, which are typically more efficient than WANs.
• Inbound ACLs are applied to Ethernet interfaces, while outbound ACLs are applied to slower serial interfaces.

4.

Refer to the exhibit. The network administrator of a company needs to configure the router RTA to allow its business partner (Partner A) to access the web server located in the internal network. The web server is assigned a private IP address, and a static NAT is configured on the router for its public IP address. Finally, the administrator adds the ACL. However, Partner A is denied access to the web server. What is the cause of the problem?
• Port 80 should be specified in the ACL.
• The public IP address of the server, 209.165.201.5, should be specified as the destination.
• The ACL should be applied on the s0/0 outbound interface.
• The source address should be specified as 198.133.219.0 255.255.255.0 in the ACL.

5. ACL logging generates what type of syslog message?
• unstable network
• warning
• informational
• critical situation

6. Which two host addresses are included in the range specified by 172.16.31.64 0.0.0.31? (Choose two.)
• 172.16.31.64
• 172.16.31.77
• 172.16.31.78
• 172.16.31.95
• 172.16.31.96

7. Traffic from the 64.104.48.0 to 64.104.63.255 range must be denied access to the network. What wildcard mask would the network administrator configure in the access list to cover this range?
• 0.0.15.255
• 0.0.47.255
• 0.0.63.255
• 255.255.240.0

8. ACLs are used primarily to filter traffic. What are two additional uses of ACLs? (Choose two.)
• specifying source addresses for authentication
• specifying internal hosts for NAT
• identifying traffic for QoS
• reorganizing traffic into VLANs
• filtering VTP packets

9. What can an administrator do to ensure that ICMP DoS attacks from the outside are mitigated as much as possible, without hampering connectivity tests initiated from the inside out?
• Create an access list permitting only echo reply and destination unreachable packets from the outside.
• Create an access list denying all ICMP traffic coming from the outside.
• Permit ICMP traffic from only known external sources.
• Create an access list with the established keyword at the end of the line.

10. What effect does the command reload in 30 have when entered into a router?
• If a router process freezes, the router reloads automatically.
• If a packet from a denied source attempts to enter an interface where an ACL is applied, the router reloads in 30 minutes.
• If a remote connection lasts for longer than 30 minutes, the router forces the remote user off.
• A router automatically reloads in 30 minutes.

11.

Refer to the exhibit. The following commands were entered on RTB.
RTB(config)# access-list 4 deny 192.168.20.16 0.0.0.15
RTB(config)# access-list 4 permit any
RTB(config)# interface serial 0/0/0
RTB(config-if)# ip access-group 4 in
Which addresses do these commands block access to RTB?
• 192.168.20.17 to 192.168.20.31
• 192.168.20.16 to 192.168.20.31*
• 192.168.20.16 to 192.168.20.32
• 192.168.20.16 to 192.168.20.33

12.

Refer to the exhibit. The new security policy for the company allows all IP traffic from the Engineering LAN to the Internet while only web traffic from the Marketing LAN is allowed to the Internet. Which ACL can be applied in the outbound direction of Serial 0/1 on the Marketing router to implement the new security policy?
• access-list 197 permit ip 192.0.2.0 0.0.0.255 any
access-list 197 permit ip 198.18.112.0 0.0.0.255 any eq www
• access-list 165 permit ip 192.0.2.0 0.0.0.255 any
access-list 165 permit tcp 198.18.112.0 0.0.0.255 any eq www
access-list 165 permit ip any any
• access-list 137 permit ip 192.0.2.0 0.0.0.255 any
access-list 137 permit tcp 198.18.112.0 0.0.0.255 any eq www
• access-list 89 permit 192.0.2.0 0.0.0.255 any
access-list 89 permit tcp 198.18.112.0 0.0.0.255 any eq www

13. Which three statements are true concerning standard and extended ACLs? (Choose three.)
• Extended ACLs are usually placed so that all packets go through the network and are filtered at the destination.
• Standard ACLs are usually placed so that all packets go through the network and are filtered at the destination.
• Extended ACLs filter based on source address only, and must be placed near the destination if other traffic is to flow.
• Standard ACLs filter based on source address only, and must be placed near the destination if other traffic is to flow.
• Extended ACLs filter with many possible factors, and they allow only desired packets to pass through the network if placed near the source.
• Standard ACLs filter with many possible factors, and they allow only desired packets to pass through the network if placed near the source.

14.

Refer to the exhibit. Company policy for the network that is shown indicates the following guidelines:
1) All hosts on the 192.168.3.0/24 network, except host 192.168.3.77, should be able to reach the 192.168.2.0/24 network.
2) All hosts on the 192.168.3.0/24 network should be able to reach the 192.168.1.0/24 network.
3) All other traffic originating from the 192.168.3.0 network should be denied.
Which set of ACL statements meets the stated requirements when they are applied to the Fa0/0 interface of router R2 in the inbound direction?
• access-list 101 deny ip any any
access-list 101 deny ip 192.168.3.77 0.0.0.0 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
• access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 deny ip 192.168.3.77 0.0.0.0 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
• access-list 101 deny ip 192.168.3.77 0.0.0.0 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
• access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 deny ip 192.168.3.77 0.0.0.0 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 101 permit ip any any
• access-list 101 deny ip 192.168.3.77 0.0.0.0 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.0.0 0.0.255.255

15.

Hosts from the Limerick LAN are not allowed access to the Shannon LAN but should be able to access the Internet. Which set of commands will create a standard ACL that will apply to traffic on the Shannon router interface Fa0/0 implementing this security?
• access-list 42 deny 172.19.123.0 0.0.0.255 192.0.2.0 0.0.0.255
access-list 42 permit any
• access-list 56 deny 172.19.123.0 0.0.0.255
access-list 56 permit any
• access-list 61 deny 172.19.123.0 0.0.0.0
access-list 61 permit any
• access-list 87 deny ip any 192.0.2.0 0.0.0.255
access-list 87 permit ip any

16.

Refer to the exhibit. A network administrator needs to configure an access list that will allow the management host with an IP address of 192.168.10.25/24 to be the only host to remotely access and configure router RTA. All vty and enable passwords are configured on the router. Which group of commands will accomplish this task?
• Router(config)# access-list 101 permit tcp any 192.168.10.25 0.0.0.0 eq telnet
Router(config)# access-list 101 deny ip any any
Router(config)# int s0/0
Router(config-if)# ip access-group 101 in
Router(config-if)# int fa0/0
Router(config-if)#ip access-group 101 in
• Router(config)# access-list 10 permit 192.168.10.25 eq telnet
Router(config)# access-list 10 deny any
Router(config)# line vty 0 4
Router(config-line)#access-group 10 in
• Router(config)# access-list 86 permit host 192.168.10.25
Router(config)# line vty 0 4
Router(config-line)# access-class 86 in
• Router(config)# access-list 125 permit tcp 192.168.10.25 any eq telnet
Router(config)# access-list 125 deny ip any any
Router(config)# int s0/0
Router(config-if)# ip access-group 125 in

17. Which ACL permits host 10.220.158.10 access to the web server 192.168.3.244?
• access-list 101 permit tcp host 10.220.158.10 eq 80 host 192.168.3.224
• access-list 101 permit tcp 10.220.158.10 0.0.0.0 host 192.168.3.224 0.0.0.0 eq 80
• access-list 101 permit host 10.220.158.10 0.0.0.0 host 192.168.3.224 0.0.0.0 eq 80
• access-list 101 permit tcp 10.220.158.10 0.0.0.0 host 192.168.3.224 eq 80

18. Which wildcard mask would match the host range for the subnet 192.16.5.32 /27?
• 0.0.0.32
• 0.0.0.63
• 0.0.63.255
• 0.0.0.31

19. A security administrator wants to secure password exchanges on the vty lines on all routers in the enterprise. What option should be implemented to ensure that passwords are not sent in clear text across the public network?
• Use Telnet with an authentication server to ensure effective authentication.
• Apply an access list on the router interfaces to allow only authorized computers.
• Apply an access list on the vty line to allow only authorized computers.
• Use only Secure Shell (SSH) on the vty lines.

20.

Refer to the exhibit. An administrator notes a significant increase in the amount of traffic entering the network from the ISP. The administrator clears the access-list counters. After a few minutes, the administrator again checks the access-list table. What can be concluded from the most recent output shown?
• A small amount of HTTP trafic is an indication that the web server was not configured correctly.
• A larger amount of POP3 traffic (compared with SMTP traffic) indicates that there are more POP3 email clients than SMTP clients in the enterprise.
• A large amount of ICMP traffic is being denied at the interface, which can be an indication of a DoS attack.
• A larger amount of email traffic (compared with web traffic) is an indication that attackers mainly targeted the email server.

CCNA 3 Module 7 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:30:00 +0000

1. Why are Network Control Protocols used in PPP?
• to establish and terminate data links
• to provide authentication capabilities to PPP
• to manage network congestion and to allow quality testing of the link
• to allow multiple Layer 3 protocols to operate over the same physical link

2. What is the data transmission rate for the DS0 standard?
• 44 kb/s
• 64 kb/s
• 1.544 Mb/s
• 44.736 Mb/s

3. In which two layers of the OSI model are key differences found between a LAN and a WAN. (Choose two.)
• Layer 1
• Layer 2
• Layer 3
• Layer 4
• Layer 6
• Layer 7

4. Which statement is true about the Cisco implementation of the HDLC protocol?
• It supports authentication.
• It has a universally compatible frame format.
• It is the default encapsulation for serial interfaces on Cisco routers.
• It does not support multiple protocols across a single link.

5.

Refer to the exhibit. A network administrator has a connectivity problem between the serial interfaces of Merida and Vargas. What is the cause of the problem?
• Authentication is required on the serial link.
• The encapsulation is misconfigured.
• The IP addresses are on different subnets.
• The serial interface on Vargas is shutdown.
• The loopback interfaces on both routers are not configured.

6.

Refer to the exhibit. What statement is true about the exhibited output?
• LCP is in the process of negotiating a link.
• LCP and NCP are waiting for CHAP authentication to complete.
• LCP negotiation has completed successfully, but NCP negotiation is in progress.
• LCP and NCP negotiation is complete, and the data link service is available to carry packets.

7. Which three statements are true regarding LCP? (Choose three.)
• It is responsible for negotiating link establishment.
• It negotiates options for Layer 3 protocols running over PPP.
• It uses MD5 encryption while negotiating link-establishment parameters.
• It terminates the link upon user request or the expiration of an inactivity timer.
• It can test the link to determine if link quality is sufficient to bring up the link.
• It monitors the link for congestion and dynamically adjusts the acceptable window size.

8. Why are Frame Relay paths referred to as virtual?
• Frame Relay PVCs are created and discarded on demand.
• The connections between PVC endpoints act like dialup circuits.
• There are no dedicated circuits to and from the Frame Relay carrier.
• The physical circuits inside the Frame Relay cloud do not contain exclusive links for a specific Frame Relay connection.

9. What best describes the use of a data-link connection identifier (DLCI)?
• an address identifying a virtual circuit
• a logical address identifying the DCE device
• an address identifying a Layer 3 service across a Frame Relay network
• a logical address identifying the physical interface between a router and a Frame Relay switch

10. What two services allow the router to dynamically map data link layer addresses to network layer addresses Frame Relay network? (Choose two.)
• ARP
• ICMP
• Proxy ARP
• Inverse ARP
• LMI status messages

11. Which three statements describe functions of the Point-to-Point Protocol with regards to the OSI model?(Choose three.)
• operates at all layers of the OSI model
• provides a mechanism to multiplex several network layer protocols
• can be configured on both synchronous and asynchronous serial interfaces
• uses Layer 3 of the OSI model to establish and maintain a session between devices
• uses the data link layer to configure such options as error detection and compression
• uses network control protocols to test and maintain connectivity between devices

12. At what physical location does the responsibility for a WAN connection change from the user to the service provider?
• demilitarized zone (DMZ)
• demarcation point
• local loop
• cloud

13. What does a Frame Relay switch use to inform the sender that there is congestion?
• FECN
• BECN
• DE
• FCS

14.

Refer to the exhibit. What statement is true about the debug output?
• R2 is using PAP instead of CHAP.
• The routers have different CHAP passwords configured.
• The administrator performed a shutdown on the R2 PPP interface during negotiation.
• The Layer 3 protocol negotiation caused the connection failure.

15. Which two statements describe the function of time-division multiplexing? (Choose two.)
• Multiple data streams share one common channel.
• Conversations that require extra bandwidth receive any unused time slices.
• Time slots are utilized on a first-come, first-served basis.
• Time slots go unused if a sender has nothing to transmit.
• Priority can be dedicated to one data source.

16. When customers use credit cards to make purchases at a small business, a modem is heard dialing a telephone number to transfer the transaction data to the central office. What type of WAN serial connection is in use?
• leased line
• point-to-point
• circuit switched
• packet switched

17. Which best describes data communications equipment (DCE)?
• serves as data source and/or destination
• responsible for negotiating windowing and acknowledgements
• physical devices such as protocol translators and multiplexers
• equipment that forwards data and is responsible for the clocking signal

18. Permanent virtual circuits and switched virtual circuits are both part of which option for WAN connectivity?
• leased line
• cell switching
• packet switching
• circuit switching

19. Which field of a frame uses error detection mechanisms to verify that the frame is not damaged intransit?
• FCS
• MTU
• flag
• control
• protocol

20. What occurs in the encapsulation process as a data packet moves from a LAN across a WAN?
• The Layer 2 encapsulation changes to a format that is appropriate for the WAN technology.
• The Layer 3 encapsulation changes to a format that is appropriate for the WAN technology.
• Both Layer 2 and Layer 3 encapsulation change to a technology that is appropriate for the WAN.
• Both Layer 2 and Layer 3 encapsulation remain constant as the data packet travels throughout the network.

21.

Refer to the exhibit. The network administrator is configuring R1 to connect to R2, which is a non-Cisco router. Which encapsulation method will need to be configured for communication to occur?
• HDLC
• HSSI
• ISDN
• IPCP
• PPP

22. A company is implementing dialup services for remote workers to connect to the local network. The company uses multiple Layer 3 protocols and requires authentication for security. Which protocol should be used for this remote access?
• LMI
• PPP
• HDLC
• Frame Relay

23. Which two options can LCP negotiate? (Choose two.)
• compression
• authentication
• dynamic flow control
• network layer address for IP
• connection-oriented or connectionless communication methods

24. What statement best describes cell switching?
• It uses a dedicated path between endpoints.
• It creates a permanent physical link between two points.
• It uses DLCIs to identify virtual circuits.
• It creates fixed-length packets that traverse virtual circuits.

CCNA 3 Module 6 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:29:00 +0000

1.

Refer to the exhibit. What statement describes the DR/BDR relationship of the HQ router?
• HQ is the DR.
• HQ is the BDR.
• HQ is a DROTHER.
• HQ is a member of an NBMA network.

2. Which two features are associated with Frame Relay OSPF point-to-multipoint environments? (Choose two.)
• A DR is not elected.
• The OSPF priority value determines the active DR on the Frame Relay link.
• OSPF neighbor routers are statically defined.
• The link types are identified as broadcast multiaccess.
• The BDR will have a router ID whose value is greater than the DR router ID.

3.

Refer to the exhibit. How was the OSPF default gateway entry for R2 determined?
• Default routes are automatically injected by OSPF into all advertisements.
• A static default gateway route is defined in the configuration of R2.
• The default-information originate command is applied on R1.
• The ISP defines the gateway of last resort and automatically passes it to R1 and R2.
• The ip default-gateway command is applied on R2.

4. What is always required for OSPF routers to share routing information?
• designated routers
• a backup designated router
• neighbor adjacencies
• an NBMA network topology
• links that are configured on the 224.0.0.0 network

5.

Refer to the exhibit. A network administrator has implemented OSPF and the network has converged. If all router interfaces are enabled and functional, what route will OSPF view as lowest cost when moving frames from Host3 to Host1?
• R3 to R4 to R1
• R3 to R1
• R3 to R2 to R1
• R3 to R5 to R2 to R1

6.

Refer to the exhibit. Which commands configure router A for OSPF?
• router ospf 1
network 192.168.10.0
• router ospf 1
network 192.168.10.64 0.0.0.63 area 0
network 192.168.10.192 0.0.0.3 area 0
• router ospf 1
network 192.168.10.64 255.255.255.192
network 192.168.10.192 255.255.255.252
• router ospf 1
network 192.168.10.0 area 0

7.

Refer to the exhibit. Which network statement configures the home router to allow all the interfaces to participate in OSPF?
• network 10.0.0.0 0.3.255.255 area 0
• network 10.8.0.0 0.0.0.3 area 0
• network 10.8.0.0 0.3.255.255 area 0
• network 10.10.0.0 0.0.0.3 area 0
• network 10.12.0.0 0.3.255.255 area 0

8. Which statement is true regarding OSPF DR and BDR elections?
• A new DR/BDR election occurs each time a new OSPF neighbor is added.
• The router with the highest OSPF priority setting wins the election for DR.
• The default priority value for a router connected to a multi-access network is 0.
• The router with the highest MAC address is elected as the DR when the default priority values are used.

9.

Refer to the exhibit. The network administrator would like only the 172.16.32.0 network advertised to Router1. Which OSPF network command accomplishes this?
• Router2(config-router)# network 172.16.0.0 0.0.0.15 area 0
• Router2(config-router)# network 172.16.0.0 0.0.15.255 area 0
• Router2(config-router)# network 172.16.32.0 0.0.15.255 area 0
• Router2(config-router)# network 172.16.32.0 0.0.255.255 area 0

10. Which two statements describe the operation of link-state routing protocols? (Choose two.)
• All routers in the same area have identical link-state databases when converged.
• Routing loops are prevented by running the Diffusing Update Algorithm (DUAL).
• Link-state routers send frequent periodic updates of the entire routing table.
• Reliable Transport Protocol (RTP) is used to deliver and receive LSAs.
• Calculating the shortest path for each destination is accomplished with the SPF algorithm.

11.

Refer to the exhibit. Routers A, B, and C are part of the existing OSPF network. Router D has been added to the network. All routers are running OSPF and have the indicated priorities applied to the interface. What is the DR/BDR status immediately after router D is added to the existing network?
• An election is forced and router D wins the DR election.
• The DR and BDR do not change until the next election.
• An election is forced and the existing BDR becomes the DR.
• The router with the highest router ID becomes the new BDR.

12. Which two statements describe the use of OSPF DR/BDR elections? (Choose two.)
• Elections are always optional.
• Elections are required in all WAN networks.
• Elections are required in point-to-point networks.
• Elections are required in broadcast multiaccess networks.
• Elections are sometimes required in NBMA networks.

13.

Refer to the exhibit. As part of an OSPF network, R1 and R2 are trying to become adjacent neighbors. Although it appears that the two systems are communicating, neither of the routing tables include OSPF routes received from its neighbor. What could be responsible for this situation?
• R1 and R2 are not on the same subnet.
• The Process IDs on each router do not match.
• The timer intervals on the routers do not match.
• The value set for the Transmit Delay time on both routers is too low.

14.

Refer to the exhibit. What is the purpose of the value 128 shown in bold?
• It is the OSPF cost metric.
• It is the OSPF administrative distance.
• It is the value assigned by the Dijkstra algorithm that designates the distance in hops to the network.
• It is the value assigned to an interface that is used by the DUAL algorithm to determine the metric.

15.

Refer to the exhibit. What is the purpose of the configuration commands added on router B?
• allows router A to form an adjacency with router B
• provides a stable OSPF router ID on router B
• provides a method of testing router traffic
• creates the OSPF adjacency table on router B

16.

Refer to the exhibit. The command ip route 10.16.1.64 255.255.255.252 s0/0/0 is entered into the router. Why does network 10.16.1.64/30 appear in the routing table in addition to network 10.16.1.64/27?
• The router views 10.16.1.64/30 and 10.16.1.64/27 as two different networks.
• The static route is used as a backup route for packets destined for 10.16.1.64/27.
• The AD for static routes is lower than the AD for OSPF routes.
• The static route metric is lower than the OSPF metric for the 10.16.1.64/27 network.

17. What is the primary difference between link-state protocols and distance vector protocols with regard to route calculation?
• Distance vector protocols take existing routes from their neighbors and add to them. Link-state protocols independently calculate full routes.
• Link-state protocols calculate and pass full routing tables to all routers in their associated areas, and distance vector protocols do not.
• When determining invalid routes, link-state protocols use split horizon for all route computations. Distance vector protocols use reverse poisoning.
• Distance vector protocols require more CPU and RAM for route calculations than link-state protocols require.

18. What range of networks are advertised in the OSPF updates by the command Router1(config-router)# network 192.168.0.0 0.0.15.255 area 0?
• 192.168.0.0/24 through 192.168.0.15/24
• 192.168.0.0/24 through 192.168.15.0/24
• 192.168.15.0/24 through 192.168.31.0/24
• 192.168.15.0/24 through 192.168.255.0/24
• 192.168.16.0/24 through 192.168.255.0/24

19.

Refer to the exhibit. When establishing adjacency relationships, which IP address would router A use to send hello packets to router B?
• 10.11.0.1
• 10.11.0.2
• 10.11.0.255
• 224.0.0.5
• 255.255.255.255

20.

Refer to the exhibit. Which router will be elected the DR and which will become the BDR?
• R1 will be DR and R2 will be BDR.
• R1 will be DR and R3 will be BDR.
• R2 will be DR and R1 will be BDR.
• R2 will be DR and R3 will be BDR.
• R3 will be DR and R2 will be BDR.
• R3 will be DR and R1 will be BDR.

21. When compared to a distance vector routing protocol, what is a benefit of the hierarchical design approach that is used in large OSPF networks?
• simpler configuration
• reduction of router processing requirements
• isolation of network instability
• less complex network planning

22. What are two advantages of using a link-state routing protocol instead of a distance vector routing protocol? (Choose two.)
• The topology database eliminates the need for a routing table.
• Frequent periodic updates are sent to minimize the number of incorrect routes in the topological database.
• Routers have direct knowledge of all links in the network and how they are connected.
• After the initial LSA flooding, routers generally require less bandwidth to communicate changes in a topology.
• A link-state routing protocol requires less router processor power.

23. If a network has converged, what is true about the link-state database held by each router in the same OSPF area?
• Each router has a link-state database containing the same status information.
• Each router has a different link-state database depending on its position within the network.
• The link-state database is stored in a designated router and is accessed by each router in the area as needed.
• The link-state database in each router only contains information about adjacent routers and the status of their links.

24.

Refer to the exhibit. RTRC was recently configured and is not sending the proper OSPF routes to RTRB, as shown in the RTRB routing table. Based on the RTRC configuration, what is most likely the problem?
• RTRC interfaces are administratively shut down.
• The OSPF process ID for RTRC does not match the process ID used on RTRB.
• The interface addresses on RTRC overlap with other addresses in the network.
• The OSPF routing configuration on RTRC has a missing or incorrect network statement.

CCNA 3 Module 5 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:27:00 +0000

1. What three statements are true about routers that are configured for EIGRP? (Choose three.)
• They can support multiple routed protocols
• They can support only link-state protocols.
• They send their entire routing tables to neighboring routers.
• They send partial routing updates in response to topology changes.
• They send routing updates to all other routers in the network.
• They use hello packets to inform neighboring routers of their status.

2. Given the following commands:
Router(config)# router rip
Router(config-router)# network 192.31.7.0
What three conclusions can be determined based on the commands used on the router? (Choose three.)
• A link-state routing protocol is used.
• A distance vector routing protocol is used.
• Routing updates broadcast every 30 seconds.
• Routing updates broadcast every 90 seconds.
• Hop count is the only metric used for route selection.
• Bandwidth, load, delay, and reliability are metrics used for route selection.

3. What is indicated when an EIGRP route is in the passive state?
• The route has the highest path cost of all routes to that destination network.
• The route must be confirmed by neighboring routers before it is put in the active state.
• The route is a feasible successor and will be used if the active route fails.
• There is no activity on the route to that network.
• The route is viable and can be used to forward traffic.

4. What two problems may occur if the EIGRP default bandwidth for a serial link is higher than the actual bandwidth? (Choose two.)
• Routing updates will arrive too quickly for receiving routers to process.
• The port IP address will be rejected by the routing protocol.
• Suboptimal paths will be selected.
• The port protocol will return to the HDLC default.
• VLSM support will be disabled.
• Network convergence may be affected.

5. What is the default administrative distance for EIGRP internal routes?
• 70
• 90
• 100
• 110
• 120
• 255

6. A network administrator issues the command show ip route and sees this line of output:
192.168.3.0/24 [120/2] via 192.168.2.2, 00:00:05, Serial0/0
What two pieces of information can be obtained from the output? (Choose two.)
• RIP is the routing protocol configured.
• This is a static route to network 192.168.3.0.
• The metric for this route is 2.
• The next periodic update is in 5 seconds.
• The autonomous system number is 120.

7.

Refer to the exhibit. Which statement is true about the EIGRP authentication configuration?
• RTA and RTB will accept updates from each other.
• RTA and RTB will not accept updates from each other because key 1 on RTB does not match RTA.
• RTA and RTB will not accept updates from each other because the key chain names do not match.
• The ip authentication mode AS does not match the locally configured AS.

8. Which Layer 4 protocol does EIGRP use to provide reliability for the transmission of routing information?
• DUAL
• IP
• PDM
• RTP
• TCP
• UDP

9.

Refer to the exhibit. Routers RTR-1 and RTR-3 are completely configured. The administrator needs to configure the routing protocol on router RTR-2 so that communication occurs throughout the network. Which group of commands will successfully configure EIGRP on RTR-2?
• RTR-2(config)# router eigrp 1
RTR-2(config-router)# network 198.18.76.0
• RTR-2(config)# router eigrp 1
RTR-2(config-router)# network 198.18.76.0 0.0.0.3 no-summary
RTR-2(config-router)# network 198.18.76.4 0.0.0.3 no-summary
RTR-2(config-router)# network 198.18.76.128 0.0.0.192 no-summary
• RTR-2(config)# router eigrp 1
RTR-2(config-router)# network 198.18.76.0 0.0.0.3 area 0
RTR-2(config-router)# network 198.18.76.4 0.0.0.3 area 0
RTR-2(config-router)# network 198.18.76.192 0.0.0.192 area 0
• RTR-2(config)# router eigrp 1
RTR-2(config-router)# network 198.18.76.0 0.0.0.3
RTR-2(config-router)# network 198.198.76.4 0.0.0.3
RTR-2(config-router)# network 198.198.76.128 0.0.0.192

10. What prevents RIPv1 updates from being correctly advertised?
• an increase in network load
• the use of variable length subnet masks
• the use of multiple Layer 3 networks on the same router
• a variation in connection speeds on the links to a destination
• a mismatch between the configured bandwidth and the actual bandwidth of a link

11. What does a router that is running RIP use to determine the best path to take when forwarding data?
• the host portion of the network address
• the speed of network convergence
• the calculated metric for the destination network
• the number of broadcasts occurring on an interface
• the number of errors occurring on an interface

12. What is the purpose of the network command when RIP is being configured as the routing protocol?
• It identifies the networks connected to the neighboring router.
• It restricts networks from being used for static routes.
• It identifies all of the destination networks that the router is allowed to install in its routing table.
• It identifies the directly connected networks that will be included in the RIP routing updates.

13. How do EIGRP routers establish and maintain neighbor relationships?
• by exchanging neighbor tables with directly attached routers
• by comparing known routes to information received in updates
• by exchanging hello packets with neighboring routers
• by dynamically learning new routes from neighbors
• by exchanging routing tables with directly attached routers

14.

Refer to the exhibit. Routers A and B have EIGRP configured and automatic summarization has been disabled on both routers. Which router command will summarize the attached routes?
• ip area-range eigrp 1 192.168.10.80 255.255.255.224
• ip summary-address eigrp 1 192.168.10.64 255.255.255.192
• ip summary-address 192.168.10.80 0.0.0.31
• ip summary-address eigrp 1 192.168.10.64 0.0.0.63
• ip area-range eigrp 1 192.168.10.64 255.255.255.224

15. How often does RIPv2 send routing table updates, by default?
• every 30 seconds
• every 45 seconds
• every 60 seconds
• every 90 seconds

16.

Refer to the exhibit. A network administrator is troubleshooting a routing problem. When the show ip route command is entered on RTR-1, only the serial link between RTR-2 and RTR-3 has been learned from the RIP routing protocol. What are two issues? (Choose two.)
• RIPv1 is a classful routing protocol.
• RIPv1 does not support subnetting.
• The Ethernet networks on RTR-2 and RTR-3 were not entered correctly in the network statements on these routers.
• RIPv1 does not support VLSM.
• RIPv1 is a classless routing protocol.

17. What two statements are correct regarding EIGRP authentication? (Choose two.)
• EIGRP authentication uses the MD5 algorithm.
• EIGRP authentication uses a pre-shared key.
• EIGRP authentication requires that both routers have the same key chain name.
• EIGRP authentication uses varying levels of WEP to encrypt data exchanged between routers.
• EIGRP authentication can be configured on one router and updates from this router are protected; whereas a neighbor router can be without the authentication configuration and its updates are unprotected.

18. When should EIGRP automatic summarization be turned off?
• when a router has not discovered a neighbor within three minutes
• when a router has more than three active interfaces
• when a network contains discontiguous network addresses
• when a router has less than five active interfaces
• when a network addressing scheme uses VLSM

19. What is the maximum number of hops that RIP will attempt before it considers the destination unreachable?
• 14 hops
• 15 hops
• 16 hops
• 17 hops

20. What two statements are true regarding EIGRP tables? (Choose two.)
• A feasible successor route can be found in the topology table.
• A successor route can only be found in the routing table.
• The topology table shows whether a route is in the passive or active state.
• The routing table shows the amount of time elapsed since a router adjacency was formed.
• The neighbor table shows all adjacent Cisco devices.
• Administrative distance is shown as a column in the neighbor table.

21.

Refer to the exhibit. Which statement is true about the output from the show ip protocols command?
• RIPv2 is configured on this router.
• Auto summarization has been disabled.
• The next routing update is due in 17 seconds.
• 192.168.16.1 is the address configured on the local router

CCNA 3 Module 4 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:25:00 +0000

1. A network engineer is implementing a network design using VLSM for network 192.168.1.0/24. After subnetting the network, the engineer has decided to take one of the subnets, 192.168.1.16/28 and subnet it further to provide for point-to-point serial link addresses. What is the maximum number of subnets that can be created from the 192.168.1.16/28 subnet for serial connections?
• 1
• 2
• 4
• 6
• 8
• 16

2. When running NAT, what is the purpose of address overloading?
• limit the number of hosts that can connect to the WAN
• allow multiple inside addresses to share a single global address
• force hosts to wait for an available address
• allow an outside host to share inside global addresses

3. What two advantages does CIDR provide to a network? (Choose two.)
• reduced routing table size
• dynamic address assignment
• automatic route redistribution
• reduced routing update traffic
• automatic summarization at classful boundaries

4. How does a router keep track of which inside local address is used when NAT overload is configured?
• The router adds an additional bit to the source IP address and maintains a separate table.
• The router modifies the QoS field.
• The router uses TCP or UDP port numbers.
• The router uses a manual entry that is created and maintained in the database of the router.

5. What is a characteristic of a classful routing protocol on the network?
• All subnets are seen by all routers.
• CIDR addresses are advertised.
• A subnet can be further subnetted down and advertised correctly.
• Updates received by a router in a different major network have the default mask applied.

6. Refer to the exhibit. Which address is an inside global address?
• 10.1.1.1
• 10.1.1.2
• 198.18.1.55
• 64.100.0.1

7. Refer to the exhibit. All networks that are shown have a /24 prefix. Assuming that all routes have been discovered by all routers in the network, which address will successfully summarize only the networks that are shown?
• 192.168.8.0/21
• 192.168.8.0/24
• 192.168.16.0/20
• 192.168.16.0/21
• 192.168.16.0/24

8. What is the CIDR prefix designation that summarizes the entire reserved Class B RFC 1918 internal address range?
• /4
• /8
• /12
• /16
• /20

9. Which NAT term refers to the IP address of your inside host as it appears to the outside network?
• inside global IP address
• outside global IP address
• inside local IP address
• outside local IP address

10. A network administrator is asked to design a new addressing scheme for a corporate network. Presently, there are 500 users at the head office, 200 users at sales, 425 at manufacturing, and 50 at the research site. Which statement defines the correct VLSM addressing map with minimal waste using the 172.16.0.0/16 network?
• 172.16.0.0/20 head office
172.16.1.0/21 manufacturing
172.16.1.0/22 sales
172.16.3.0/26 research
• 172.16.48.0/19 head office
172.16.16.0/20 manufacturing
172.16.48.128 sales
172.16.48.0/26 research
• 172.16.2.0/23 head office
172.16.4.0/23 manufacturing
172.16.6.0/24 sales
172.16.7.0/26 research
• 172.16.2.0/22 head office
172.16.3.0/23 manufacturing
172.16.4.0/26 sales
172.16.4.128/25 research

11. A company using a Class B IP addressing scheme needs as many as 100 subnetworks. Assuming that variable length subnetting is not used and all subnets require at least 300 hosts, what subnet mask is appropriate to use?
• 255.255.0.0
• 255.255.240.0
• 255.255.254.0
• 255.255.255.0
• 255.255.255.128
• 255.255.255.192

12. Host A in the exhibit is assigned the IP address 10.118.197.55/20. How many more network devices can be added to this same subnetwork?
• 253
• 509
• 1021
• 2045
• 4093

13. Refer to the exhibit. RIP version 2 is configured as the network routing protocol and all of the default parameters remain the same. Which update is sent from R2 to R3 about the 10.16.1.0/24 network connected to R1?
• 10.16.0.0/16
• 10.0.0.0/24
• 10.0.0.0/8
• 10.16.1.0/24

14. What range of networks are summarized by the address and mask, 192.168.32.0/19?
• 192.168.0.0/24 - 192.168.32.0/24
• 192.168.0.0/24 - 192.168.31.0/24
• 192.168.32.0/24 – 192.168.64.0/24
• 192.168.32.0/24 – 192.168.63.0/24

15. Refer to the exhibit. Based on the output of the show ip nat translations command, which kind of address translation is in effect on this router?
• static
• public
• overload
• private

16. How many addresses will be available for dynamic NAT translation when a router is configured with the following commands?
• Router(config)#ip nat pool TAME 209.165.201.23 209.165.201.30 netmask 255.255.255.224
• Router(config)#ip nat inside source list 9 pool TAME
• 7
• 8
• 9
• 10
• 24
• 31

17. Refer to the exhibit. Which two IP addresses could be assigned to the hosts that are shown in the exhibit? (Choose two.)
• 192.168.65.31
• 192.168.65.32
• 192.168.65.35
• 192.168.65.60
• 192.168.65.63
• 192.168.65.64

18. What are the network and broadcast addresses for host 192.168.100.130/27? (Choose two.)
• network 192.168.100.0
• network 192.168.100.128
• network 192.168.100.130
• broadcast 192.168.100.157
• broadcast 192.168.100.159
• broadcast 192.168.100.255

19. Refer to the exhibit. Which two are valid VLSM network addresses for the serial link between Router1 and Router2? (Choose two.)
• 192.168.1.4/30
• 192.168.1.8/30
• 192.168.1.90/30
• 192.168.1.101/30
• 192.168.1.190/30

20. When configuring NAT on a Cisco router, what is the inside local IP address?
• the IP address of an inside host as it appears to the outside network
• the IP address of an outside host as it appears to the inside network
• the IP address of an inside host as it appears to the inside network
• the configured IP address assigned to a host in the outside network

CCNA 3 Module 3 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:22:00 +0000

1.

Refer to the exhibit. What two statements can be concluded from the information that is shown in the exhibit? (Choose two.)
• All ports that are listed in the exhibit are access ports.
• ARP requests from Host1 will be forwarded to Host2.
• Attaching Host1 to port 3 will automatically allow communication between both hosts.
• The default gateway for each host must be changed to 192.168.3.250/28 to allow communication between both hosts.
• A router connected to the switch is needed to forward traffic between the hosts.

2.

A router is configured to connect to a trunked uplink as shown in the exhibit. A packet is received on the FastEthernet 0/1 physical interface from VLAN 10. The packet destination address is 192.168.1.120. What will the router do with this packet?
• The router will forward the packet out interface FastEthernet 0/1.1 tagged for VLAN 10.
• The router will forward the packet out interface FastEthernet 0/1.2 tagged for VLAN 60.
• The router will forward the packet out interface FastEthernet 0/1.3 tagged for VLAN 60.
• The router will forward the packet out interface FastEthernet 0/1.3 tagged for VLAN 120.
• The router will not process the packet since the source and destination are on the same subnet.
• The router will drop the packet since no network that includes the source address is attached to the router.

3. The information contained in a BPDU is used for which two purposes? (Choose two.)
• to prevent loops by sharing bridging tables between connected switches
• to set the duplex mode of a redundant link
• to determine the shortest path to the root bridge
• to determine which ports will forward frames as part of the spanning tree
• to activate looped paths throughout the network

4. A router has two serial interfaces and two Fast Ethernet interfaces. This router must be connected to a WAN link and to a switch that supports four VLANs. How can this be accomplished in the most efficient and cost-effective manner to support inter-VLAN routing between the four VLANs?
• Connect a smaller router to the serial interface to handle the inter-VLAN traffic.
• Add two additional Fast Ethernet interfaces to the router to allow one VLAN per interface.
• Connect a trunked uplink from the switch to one Fast Ethernet interface on the router and create logical subinterfaces for each VLAN.
• Use serial-to-Fast Ethernet transceivers to connect two of the VLANs to the serial ports on the router. Support the other two VLANs directly to the available FastEthernet ports.

5. When are MAC addresses removed from the CAM table?
• at regular 30 second intervals
• when a broadcast packet is received
• when the IP Address of a host is changed
• after they have been idle for a certain period of time

6.

Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches. Which two are possible reasons for this? (Choose two.)
• Switch2 is in transparent mode.
• Switch1 is in client mode.
• Switch1 is using VTP version 1 and Switch2 is using VTP version 2.
• Switch2 is in server mode.
• Switch1 is in a different management domain.
• Switch1 has no VLANs.

7. Which three must be used when a router interface is configured for VLAN trunking? (Choose three.)
• one subinterface per VLAN
• one physical interface for each subinterface
• one IP network or subnetwork for each subinterface
• one trunked link per VLAN
• a management domain for each subinterface
• a compatible trunking protocol encapsulation for each subinterface

8.

Refer to the exhibit. The switches are connected with trunks within the same VTP management domain. Each switch is labeled with its VTP mode. A new VLAN is added to Switch3. This VLAN does not show up on the other switches. What is the reason for this?
• VLANs cannot be created on transparent mode switches.
• Server mode switches neither listen to nor forward VTP messages from transparent mode switches.
• VLANs created on transparent mode switches are not included in VTP advertisements.
• There are no ports assigned to the new VLAN on the other switches.
• Transparent mode switches do not forward VTP advertisements.

9. Which two criteria are used by STP to select a root bridge? (Choose two.)
• memory size
• bridge priority
• switching speed
• number of ports
• base MAC address
• switch location

10. Which three steps should be taken before moving a Catalyst switch to a new VTP management domain? (Choose three.)
• Reboot the switch.
• Reset the VTP counters to allow the switch to synchronize with the other switches in the domain.
• Download the VTP database from the VTP server in the new domain.
• Configure the VTP server in the domain to recognize the BID of the new switch.
• Select the correct VTP mode and version.
• Configure the switch with the name of the new management domain.

11. Which two items will prevent broadcasts from being sent throughout the network? (Choose two.)
• bridges
• routers
• switches
• VLANs
• hubs

12. Which two characteristics describe a port in the STP blocking state? (Choose two.)
• provides port security
• displays a steady green light
• learns MAC addresses as BPDUs are processed
• discards data frames received from the attached segment
• receives BPDUs and directs them to the system module

13. What is the first step in the process of convergence in a spanning tree topology?
• election of the root bridge
• determination of the designated port for each segment
• blocking of the non-designated ports
• selection of the designated trunk port
• activation of the root port for each segment

14. In which STP state does a switch port transmit user data and learn MAC addresses?
• blocking
• learning
• disabling
• listening
• forwarding

15. What is the purpose of VTP?
• maintaining consistency in VLAN configuration across the network
• routing frames from one VLAN to another
• routing the frames along the best path between switches
• tagging user data frames with VLAN membership information
• distributing BPDUs to maintain loop-free switched paths

16. Which statement best describes adaptive cut-through switching?
• The switch initially forwards all traffic using cut-through switching and then changes to store-and-forward switching if errors exceed a threshold value.
• The switch initially forwards all traffic using cut-through switching and then changes to fast-forward switching if errors exceed a threshold value.
• The switch initially forwards all traffic using cut-through switching and then temporarily disables the port if errors exceed a threshold value.
• The switch initially forwards all traffic using store-and-forward switching and then changes to cut-through switching if errors exceed a threshold value.

17. Using STP, how long does it take for a switch port to go from the blocking state to the forwarding state?
• 2 seconds
• 15 seconds
• 20 seconds
• 50 seconds

18.

Refer to the exhibit. The switches are interconnected by trunked links and are configured for VTP as shown. A new VLAN is added to Switch1. Which three actions will occur? (Choose three.)
• Switch1 will not add the VLAN to its database and will pass the update to Switch 2.
• Switch2 will add the VLAN to its database and pass the update to Switch3.
• Switch3 will pass the VTP update to Switch4.
• Switch3 will add the VLAN to its database.
• Switch4 will add the VLAN to its database.
• Switch4 will not receive the update.

19 Which Catalyst feature causes a switch port to enter the spanning-tree forwarding state immediately?
• backbonefast
• uplinkfast
• portfast
• rapid spanning tree

20.

Refer to the exhibit. Which set of commands would be used on the router to provide communication between the two hosts connected to the switch?
• Router(config)# interface vlan 2
Router(config-if)# ip address 192.168.2.1 255.255.255.0
Router(config-if)# no shutdown
Router(config)# interface vlan 3
Router(config-if)# ip address 192.168.3.1 255.255.255.0
Router(config-if)# no shutdown
• Router(config)# interface fastethernet 0/0
Router(config-if)# no shutdown
Router(config-if)# interface fastethernet 0/0.2
Router(config-subif)# encapsulation dot1q 2
Router(config-subif)# ip address 192.168.2.1 255.255.255.0
Router(config-if)# interface fastethernet 0/0.3
Router(config-subif)# encapsulation dot1q 3
Router(config-subif)# ip address 192.168.3.1 255.255.255.0
• Router(config)# interface vlan 2
Router(config-if)# switchport mode trunk dot1q
Router(config)# interface vlan 3
Router(config-if)# switchport mode trunk dot1q
• Router(config)# interface fastethernet 0/0
Router(config-if)# mode trunk dot1q 2 3
Router(config-if)# ip address 192.168.2.1 255.255.255.0

CCNA 3 Module 2 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:20:00 +0000

1. When searching for information about authentication methods and usernames of companypersonnel, where can a network administrator look?
• Business Continuity Plan
• Business Security Plan
• Network Maintenance Plan
• Service Level Agreement

2. Refer to the exhibit. Which statement is true about port Fa5/1?
• When a violation is detected, the port will log the information to a syslog server.
• When a violation is detected, the port will go into err-disable mod
• There have been 11 security violations since the last reloa
• The port is currently in the shutdown state.

3. Which two types of information should be included in a business continuity plan? (Choose two.)
• maintenance time periods
• intrusion monitoring records
• offsite data storage procedures
• alternate IT processing locations*
• problem resolution escalation steps

4. Which two router parameters can be set from interface configuration mode? (Choose two.)
• IP address
• Telnet password
• hostname
• console password
• subnet mask
• enable secret password

5. Which two devices protect a corporate network against malicious attacks at the enterprise edge ?(Choose two.)
• demarc
• IP security (IPSec)
• Data Service Unit (DSU)
• intrusion prevention system (IPS)
• intrusion detection system (IDS)

6. Which three steps must be performed to remove all VLAN information from a switch but retain therest of the configuration? (Choose three.)
• Remove all VLAN associations from the interfaces.
• Remove the 802.1q encapsulation from the interfac
• Issue the command copy start run.
• Issue the command delete flash:vlan.dat.
• Issue the command erase start.
• Reload the switch.

7. What is the demarcation?
• physical point where the ISP responsibilty ends and the customer responsibilty begins
• physical location where all server farm connections meet before being distributed into the Core
• point of entry for outside attacks and is often vulnerable
• point of entry for all Access Layer connections from the Distribution Layer devices

8. Which device is responsible for moving packets between multiple network segments?
• router
• switch
• CSU/DSU
• IDS device

9. What information can an administrator learn using the show version command?
• Cisco IOS filename
• configured routing protocol
• status of each interface
• IP addresses of all interfaces

10. Which two situations require a network administrator to use out-of-band management to change arouter configuration? (Choose two.)
• Network links to the router are down.
• No Telnet password has been configured on the router.
• The administrator can only connect to the router using SSH.
• The network interfaces of the router are not configured with IP addresses.
• Company security policy requires that only HTTPS be used to connect to routers.

11. It is crucial that network administrators be able to examine and configure network devices fromtheir homes. Which two approaches allow this connectivity without increasing vulnerability to externalattacks? (Choose two.)
• Configure a special link at the POP to allow external entry from the home computer.
• Set up VPN access between the home computer and the network.
• Install a cable modem in the home to link to the network.
• Configure ACLs on the edge routers that allow only authorized users to access management portson network devices.
• Configure a server in the DMZ with a special username and password to allow external access.

12. A network administrator must define specific business processes to implement if a catastrophicdisaster prevents a company from performing daily business routines. Which portion of the networkdocumentation is the administrator defining?
• business security plan
• business continuity plan
• network solvency plan
• service level agreement
• network maintenance plan

13. A DoS attack crippled the daily operations of a large company for 8 hours. Which two optionscould be implemented by the network administrator to possibly prevent such an attack in the future?(Choose two.)
• install security devices with IDS and IPS at the enterprise edge
• reset all user passwords every 30 days
• filter packets based on IP address, traffic pattern, and protocol
• deny external workers VPN access to internal resources
• ensure critical devices are physically secure and placed behind the demarc

14. A network manager wants to have processes in place to ensure that network upgrades do not affectbusiness operations. What will the network manager create for this purpose?
• business security plan
• business continuity plan
• service level agreement
• network maintenance plan

15. An investment company has multiple servers that hold mission critical datThey are worried that ifsomething happens to these servers, they will lose this valuable information. Which type of plan isneeded for this company to help minimize loss in the event of a server crash?
• business security
• business continuity
• network maintenance
• service level agreement

16. What type of connection point is a point of presence (POP)?
• between a client and a host
• between two local networks
• between a computer and a switch
• between an ISP and an Enterprise network

17. A network administrator needs to configure Telnet access to a router. Which group of commandsenable Telnet access to the router?
• Router(config)# enable password class
Router(config)# line con 0
Router(config-line)# login
Router(config-line)# password cisco
• Router(config)# ip host 192.168.1.1 NewYork
Router(config)# enable password cisco
• Router(config)# line aux 0
Router(config-line)# login
Router(config-line)# password cisco
• Router(config)# enable password class
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password cisco

CCNA 3 Module 1 Discovery 4.0

noreply@blogger.com (Bongradz) — Mon, 24 Nov 2008 12:17:00 +0000

1. Which two statements are reasons why UDP is used for voice and video traffic instead of TCP?(Choose two.)
• TCP requires all data packets to be delivered for the data to be usable.
• The acknowledgment process of TCP introduces delays that break the streams of data.
• UDP does not have mechanisms for retransmitting lost packets.
• UDP tolerates delays and compensates for them.
• TCP is a connectionless protocol that provides end-to-end reliability.
• UDP is a connection-oriented protocol that provides end-to-end reliability.

2. In which functional area of the Cisco Enterprise Architecture should IDS and IPS be located to detect
• and prevent services from accessing hosts?
• Enterprise Campus
• Edge Distribution
• Enterprise Edge
• Service Provider Edge

3. A business consultant must use Internet websites to research a report on the e-business strategies of several firms and then electronically deliver the report to a group of clients in cities throughout the world. Which two teleworker tools can the consultant use to accomplish this project? (Choose two.)
• VoIP
• VPN
• HTTP
• Telnet
• email

4. Which two measures help ensure that a hardware problem does not cause an outage in an enterprise LAN that supports mission critical services? (Choose two.)
• providing failover capability
• installing redundant power supplies
• purchasing more bandwidth from the ISP
• implementing broadcast containment with VLANs
• installing routers that can handle a greater amount of throughput

5. Which task would typically only require services located at the access layer of the hierarchical design model?
• connecting to the corporate web server to update sales figures
• using a VPN from home to send data to the main office servers
• printing a meeting agenda on a local departmental network printer
• placing a VoIP call to a business associate in another country
• responding to an e-mail from a co-worker in another department

6. How does a VPN work to support remote user productivity?
• It uses SSL to encrypt remote user logins to the corporate intranet.
• It uses secure Telnet for remote user connections to internal network devices.
• It creates a virtual circuit that allows real-time communications between any two Internet endpoints.
• It uses encapsulation to create a secure tunnel for transmission of data across non-secure networks.

7. A remote user needs to access a networking device on the internal network of the company. The transactions between the remote user and the device must be secure. Which protocol enables this to happen securely?
• HTTP
• SSH
• Telnet
• FTP

8. What does VoIP provide to telecommuters?
• high-quality, live-video presentations
• real-time voice communications over the Internet
• ability to share desktop applications simultaneously
• secure, encrypted data transmissions through the Internet

9. Which functional component of the Cisco Enterprise Architecture is responsible for hosting internal servers?
• enterprise campus
• enterprise edge
• service provider edge
• building distribution

10. What is the purpose of the Cisco Enterprise Architecture?
• remove the three-layer hierarchical model and use a flat network approach
• divide the network into functional components while still maintaining the concept of Core, Distribution, and Access Layers
• provide services and functionality to the core layer by grouping various components into a single
• component located in the access layer
• reduce overall network traffic by grouping server farms, the management server, corporate intranet, and e-commerce routers in the same layer

11. Which two solutions would an enterprise IT department use to facilitate secure intranet access for remote workers? (Choose two.)
• VPN
• NAT
• user authentication
• client firewall software
• packet sniffing

12. Which statement describes the difference between an enterprise WAN and an enterprise extranet?
• An enterprise WAN is designed to interconnect local LANs, while an enterprise extranet is designed to interconnect remote branch offices.
• An enterprise WAN is designed to interconnect branch offices, while an enterprise extranet is designed to give access to external business partners.
• An enterprise WAN is designed to provide remote access for its teleworkers, while an enterprise extranet is designed to provide Internet connectivity for the enterprise.
• An enterprise WAN is designed to provide Internet connectivity for the enterprise, while an enterprise extranet is designed to provide remote access to the enterprise network for teleworkers.

13. Why would a network administrator want to limit the size of failure domains when designing a network?
• reduces the effect of Ethernet collisions
• reduces the impact of a key device or service failure
• reduces the impact of Internet congestion on critical traffic
• reduces the impact of blocking broadcast packets at the edge of the local network

14. What is the main purpose of the Access Layer in a hierarchically designed network?
• performs routing and packet manipulation
• supplies redundancy and failover protection
• provides a high-speed, low-latency backbone
• serves as a network connection point for end-user devices

15. Which three functions are performed at the Distribution Layer of the hierarchical network model? (Choose three.)
• forwards traffic that is destined for other networks
• isolates network problems to prevent them from affecting the Core Layer
• allows end users to access the local network
• provides a connection point for separate local networks
• transports large amounts of data between different geographic sites
• forwards traffic to other hosts on the same logical network

16. What is a benefit of having an extranet?
• It provides web-like access to company information for employees only.
• It limits access to corporate information to secure VPN or remote access connections only.
• It allows customers and partners to access company information by connecting to a public web server.
• It allows suppliers and contractors to access confidential internal information using controlled external connections.

17. What are two important characteristics or functions of devices at the Enterprise Edge? (Choose two.)
• providing Internet, telephone, and WAN services to the enterprise network
• providing a connection point for end-user devices to the enterprise network
• providing high-speed backbone connectivity with redundant connections
• providing intrusion detection and intrusion prevention to protect the network against malicious activity
• providing packet inspection to determine if incoming packets should be allowed on the enterprise network

18. Why is TCP the preferred Layer 4 protocol for transmitting data files?
• TCP is more reliable than UDP because it requires lost packets to be retransmitted.
• TCP requires less processing by the source and destination hosts than UDP.
• UDP introduces delays that degrade the quality of the data applications.
• TCP ensures fast delivery because it does not require sequencing or acknowlegements.

19. The ABC Corporation implements the network for its new headquarters using the Cisco Enterprise Architecture. The network administrator wants to filter the traffic from and to the outside world. Where should the administrator deploy a firewall device?
• server farm
• enterprise edge
• enterprise campus
• service provider edge

20. What can be found at the enterprise edge?
• Internet, VPN, and WAN modules
• Internet, PSTN, and WAN services
• server farms and network management
• campus infrastructure, including access layer devices

Cisco Networking Academy

noreply@blogger.com (Bongradz) — Thu, 20 Nov 2008 12:22:00 +0000

CCNA Exploration 4

(set-up 640-802)

Semester 1 - Network Fundamentals
Semester 2 - Routing Protocols and Concepts
Semester 3 - LAN Switching and Wireless
Semester 4 - Accessing The Wan

noreply@blogger.com (Bongradz) — Sun, 09 Nov 2008 08:42:00 +0000

LAN PROTOCOLS

Local Area Network protocols used in today's network environment are:

Ethernet / Fast Ethernet

Half Duplex:

1. Supported by all 10BaseX and 100BaseX standards

2. Stations listen for collisions whilst transmitting data

3. Single cable type is similar to a narrow one way bridge

Three IEEE 100BaseX standards

TX:

1. Uses same 2 twisted pair as 10mb

2. Supports full duplex

3. 4b5b encoding

FX:

1. Half Duplex - MM 412 metres

2. Full Duplex - MM 2km or SM 10km

3. 4b5b encoding

T4:

(Uses 4 pairs)

1. 3 pairs for Tx and Rx

2. 1 pair for collision detection

3. 8b6t encoding

4. Does not support full duplex mode

Full Duplex

No Collisions

Requires a dedicated point to point connection between two devices

Supported by 10 and 100Base TX and FX standards

Both ends must support full duplex at the software and hardware level

Max distance limitations based on media

Must disable the transceivers loopback and collision detection function

Four Ethernet Encapsulations

Industry Naming

Cisco Naming

Ethernet II

Arpa

Ethernet 802.3

Novell Ether

IEEE Compliant frames

Ethernet 802.3

SAP

Ethernet SNAP

SNAP

Token Ring:

More resilient under heavy data transfer loads

Data runs in a ring formation, each station receives and then repeats the signal to its downstream neighbours

Collisions don't happen because stations can't transmit unless they have a token

FDDI: (File Distributed Data Interface)

Running like token ring

Can run very long distances

Very high speed data transfers

noreply@blogger.com (Bongradz) — Sun, 09 Nov 2008 08:41:00 +0000

LAN TECHNOLOGIES

LAN devices used in today's networking environment include:

Repeaters / Hubs / Concentrators

Physical layer device

Used to extend the distance of the network

Amplifies and bit repeats

Protocol independent

No traffic segmentation

Generates a new preable (used to sequence devices and know what is data)

Bridges / Switches

Exist as layer 2 devices

Floods, then forwards data

Uses destination hardware address to make decisions about forwarding

Learns where devices are from source hardware address

Protocol independent

Used for Non routable protocols i.e. NetBEUI

Do not filter broadcast or multicast traffic

Do not define separate networks

Each port on a bridge / switch defines a separate Collision Domain.

Bridges:

Store and forward devices

Examines the frame and performs a CRC (Cyclic Redundancy Check)

Does not pass on bad frames

Set-up the 'spanning tree' option to avoid network 'loops' if your bridge has this option.

Switches:

3 main switching methods are:

Cut Through - looks at the first 6 bytes of the destination MAC address only

Fragment free cut through - looks at the first 64 bytes only

Store and forward - looks at the entire frame

Routers and Brouters:

Protocol independent - understand protocol used network layer 3

Network orientated - where to send the data

Used to connect for example, Token Ring to Ethernet

Brouter - router that can bridge traffic (NetBEUI - no layer 3 info)

VLAN's - Virtual LAN's

Set-up by user using switches assigning ports to different networks running different speeds.

Switches have to be linked to a router to assign across an inter-network

Gateway:

Converts one language to another i.e. Microsoft protocol to Novell's protocol, across a network