ADAM Forum

ADAM-6022 ADAM-6024

admin@adamforum.com — Thu, 12 Nov 2009 08:37:41 +0000

Is it possible to make peer to peer communication with ADAM-6022 and ADAM-6024 ? At Advantech utility program peer to peer/event tab is inactive how it is possible?

EKI-1351 with ADAM-4051

admin@adamforum.com — Wed, 11 Nov 2009 07:52:49 +0000

Hi all I'm trying to connect ADAM-4051 to PC trough EKI-1351. The problem is that i can see ADAM in adam.net utility and i also able to sent him commands trough terminal, but "Data area" in adam.net is not avaliable... When i connect adam di

ADAM 6050 on Internet

admin@adamforum.com — Sat, 07 Nov 2009 15:38:02 +0000

Hi to everybody. I have a problem about the use of ADAM 6050 on Internet. I set the network parameters as IP 192.168.1.135, Subnet 255.255.255.0, Gateway to the public IP of the LAN (assigned dynamically by the ISP) and the port number default (5168).

5018 module CJC always required?

admin@adamforum.com — Thu, 05 Nov 2009 18:21:46 +0000

Hi, I've inherited some Adam 5018 modules from an earlier project. One has come with the external cold junction compensation attached, the other two haven't. As I just want to make standard voltage measurements with these modules, nothing related to th

5017/5018 module current connections

admin@adamforum.com — Thu, 05 Nov 2009 18:16:43 +0000

Hi, I'm hoping for some quick advice on what should be a simple matter. I'm working with some Adam 5017 and Adam 5018 modules. I need to make 4-20mA current connections. Both modules have 4-20mA ranges. These are ranges where voltage drop across an ext

pci-1601 baseaddress and offset address

admin@adamforum.com — Thu, 05 Nov 2009 04:15:24 +0000

I want use this card in RTX environment,so I need the baseaddress and the offset address of every registration, how could I get these informations? Thank you !

ADAM 5000 invalid subnet address.

admin@adamforum.com — Wed, 04 Nov 2009 15:43:40 +0000

EKI-1521-22-24 Open Ports at Virtual Communication Mode

admin@adamforum.com — Wed, 04 Nov 2009 11:48:28 +0000

Dear Sirs Does anybody knows which ports are opened at Virtual Com Mode? If you dont know this you cant setup a DSL router for remote control and communication with eki-15XX Many thanks Giannis Stavaris Advantech Greece

TPC-1570H Brightness Adjustment

admin@adamforum.com — Mon, 02 Nov 2009 15:34:07 +0000

Can the Brightness (Backlight CCFL) be adjusted with TPC-1570H-C1E by either pressing CTRL-ALT-F3/F4 in BIOS Setup or by using SUSI API ??? Or by other means? many thanks & brgds Michael

problem with ADAM-4572

admin@adamforum.com — Fri, 30 Oct 2009 10:22:10 +0000

hello. i'm using adam-4572. Problems: 1. after run configuration utilites the program retrieve my adam(ethernet), but disabled the keys APPLY, OK, CANCEL. Why i can't change parameters of adam? and 2. I have make slave device not-modbus device

tpc-660G WXPE - HP2560

admin@adamforum.com — Thu, 29 Oct 2009 16:21:58 +0000

Dear support. On TPC-660G-RAE with windows xp embedded have same problem when install and connect USB HP2560 Printer driver. The problem appeaers only when printer is connected and sametime also when the TPC not print.

Power Generator Repair/Rewind?

admin@adamforum.com — Thu, 29 Oct 2009 14:34:23 +0000

Does anyone know of any companies that do power generator rewind and repairs for industrial-sized clients? I know that , but I was wondering if anyone knew any others, as well?

Windows 7 Drivers for PCI DAQ Cards

admin@adamforum.com — Thu, 29 Oct 2009 14:29:37 +0000

A customer has tried installing PCI-1710 & PCI-1754 in Windows 7 (Win7) environment using Vista drivers supplied with the product and in the download section of Advantech's Web-SIte. However, Win7 doesn't recognize these cards properly for whatever re

How to make PID controller?

admin@adamforum.com — Thu, 29 Oct 2009 02:33:10 +0000

Dear all, I use ADAM 5510ekw/tp and i need PID controller.. So how to make PID controller? Does multiprog have PID controller function block? thank's

Beside IE, does WebAccess support other type of browser?

admin@adamforum.com — Wed, 28 Oct 2009 08:25:27 +0000

Hi All, Beside IE, does WebAccess support other type of browser? Such, Opera, Chrome etc. Regards, Max

Adquiring time with ADAMView

admin@adamforum.com — Tue, 27 Oct 2009 12:03:51 +0000

Hello I'm using ADAMview software to read analogic inputs from two PCI-1710HG and save values to a .txt file. I can notice that when I save data from only one Analogic input, in the file appear about 40 values in one second, but when I increase the analog

How can I implement a buffer in ADAM5550KW

admin@adamforum.com — Sat, 24 Oct 2009 18:28:39 +0000

Hi this is my first post and of course my first question jejeje... I made an aplication for the ADAM5550KW and everything were perfect until the moment that I implement a REAL TO BUFFER function block... I declare my own struct arrays like this:

PCI - 1716 installing problems

admin@adamforum.com — Fri, 23 Oct 2009 05:42:33 +0000

i have some problems when installing pci1716. my current kernel is 2.6.18-164.el5 i download the drives from ur official website,

RDRV2X activity

admin@adamforum.com — Fri, 23 Oct 2009 00:20:47 +0000

Hi, We use ADAM 4570's to provide serial comms to devices which we poll - an average each device is polled two ot three times per second. There are six devices and our computer is a dual Xeon which typically runs at a 60% load. I notice that RDRV2X.

ADAM-5510 > clock() vs. milliseconds

admin@adamforum.com — Thu, 22 Oct 2009 14:25:19 +0000

Dear All, During monitoring some inputs with ADAM-5510 there is a need to measure durations with a precision of milliseconds. BIOS call thru clock() provides down to a precision of 1 / 18.2th of a second only. Maybe a TSR hooked to a spare interrupt